Engineering topics
Publications and source records attributed to Liu, Jiaqi.
Regulated adsorptive separation of alkane/alkenes has been achieved through engineering the coordinated water arrays in MOF channels.
Alkali metal-based metal-organic frameworks (MOFs) with permanent porosity are scarce because of their high tendency to coordinate with solvents such as water. However, these MOFs are lightweight and bear gravimetric benefits for gas adsorption related applications. In this paper, we present the successful construction of a microporous MOF, designated as HIAM-111, built solely on sodium ions using an octacarboxylate linker. The structure of HIAM-111 is based on 8-connected Na4 clusters and exhibits a novel topology with an underlying 3 2 ,4 2 ,8-c net. Remarkably, HAM-111 possesses a robust and highly porous framework, with a BET surface area of 1561 m 2 /g, significantly surpassing that of the previously reported Na-MOFs. Further investigations demonstrate that HIAM-111 is capable of separating C 2 H 2 /CO 2 and purifying C 2 H 4 directly from C 2 H 4 /C 2 H 2 /C 2 H 6 with high adsorption capacities. The current work may shed light on the rational design of robust and porous MOFs based on alkali metals.
Separation of ethylene from ethane is of great importance in petrochemical industry. Adsorptive separation making use of porous materials such as metal-organic frameworks (MOFs) is an energy efficient technology compared to the conventional cryogenic distillation. However, preferential adsorption of ethylene over ethane represents the major current challenge. Here we demonstrate how pore structure can significantly alter the adsorption selectivity in two isoreticular Zr-MOFs. A simple ligand functionalization in UiO-66 yields smaller/better matching pore for ethane, and weaker interaction with ethylene, greatly enhancing ethane/ethylene selectivity in MOF-801. Ab initio calculations combined with in situ infrared spectroscopic analysis unveil the nature of host-guest interactions and differences in the overall binding energies. Polymer-grade ethylene (99.9%) can be produced directly from ethane/ethylene mixture in a single step. Having well-balanced adsorption capacity and selectivity, low-cost synthesis and easy scalability MOF-801 stands out as a promising ethane-selective adsorbent for one-step ethylene purification under ambient conditions.
Not Available
The purification of C 2 H 4 from C 2 H 6 /C 2 H 4 /C 2 H 2 mixtures is of great significance in the chemical industry for C 2 H 4 production but remains a daunting task. Guided by powerful reticular chemistry principles, herein a systematic study is carried out to engineer pore dimensions and pore functionality of fcu-type Y-based metal–organic frameworks (Y-MOFs) through the construction of a series of eight new structures using linear dicarboxylate linkers with different length and functional groups. This study illustrates how delicate changes in pore size and pore surface chemistry can effectively influence the adsorption preference of C 2 H 6 , C 2 H 4 , and C 2 H 2 by the MOFs. Importantly, clear relations between pore size/pore surface polarity and C 2 adsorption selectivities of this series of MOFs are established. In particular, HIAM-326 built on a linker decorated with trifluoromethoxy group shows notably preferential adsorption of C 2 H 6 and C 2 H 2 over C 2 H 4 , with balanced C 2 H 2 /C 2 H 4 and C 2 H 6 /C 2 H 4 selectivities. Furthermore, this endows the compound with the capability of one-step purification of C 2 H 4 from C 2 H 6 /C 2 H 4 /C 2 H 2 ternary mixtures, which is validated by breakthrough measurements where high purity C 2 H 4 (99.9%+) can be obtained directly from the separation column. Its adsorption thermodynamics and underlying selective adsorption mechanisms are further revealed by ab initio calculations.
Not provided.
Topology evolution originating from variations of linker and SBU (Secondary Building Unit) geometries could largely enrich the chemistry of metal–organic frameworks (MOFs). Here we report the synthesis and characterization of three MOF structures built on the same organic linker, N,N,N',N'-Tetrakis(4-carboxyphenyl)-1,4-phenylenediamine (tcppda) and similar 8-connected M 6 (M = Zr or Y) clusters. The three compounds, HIAM-402, HIAM-403, and HIAM-311, feature 4,8-connected sqc, scu, and flu topology, respectively. Detailed structural analysis revealed that different geometries of the inorganic M 6 SBUs as well as the organic linker have led to the formation of distinct MOF nets. In particular, HIAM-402 features exceptional framework stability and high porosity and acts as a propane-selective adsorbent for the discrimination of propane and propylene. Its balanced adsorption selectivity (S propane/propylene = 1.43) and capacity (Q propane = 133.3 cm 3 /g, 298 K and 1 bar) endow it with the capability of separating propane and propylene mixtures and one-step production of highly pure propylene (purity >99.9%), as validated by column breakthrough measurements, with the presence of moisture or propyne. As a result, ab initio calculations further confirm that the propane-selective behavior of HIAM-402 is a result of its higher binding energy toward propane compared to that of propylene.
The separation of ethane (C 2 H 6 ) and ethylene (C 2 H 4 ) represents a crucial process for the production of polymer-grade C 2 H 4 , and adsorptive separation holds enormous promise for this industrially important but challenging task. Furthermore we report a new hydrogen-bonded organic frameworks (HIAM-102) with suitable channel and superhydrophobicity for preferential adsorption of C 2 H 6 over C 2 H 4 . HIAM-102 shows a C 2 H 6 /C 2 H 4 IAST selectivity of 1.9 and C 2 H 6 uptake of 48.25 cm 3 /g at 1 bar and 298 K. Benefitted from the hydrophobic pore surface, it can well-separate C 2 H 6 and C 2 H 4 under highly humid conditions as confirmed by experimental column breakthrough measurements. Computational calculations provide additional support for the experimental observations that the nonpolar channel of HIAM-102 interact favorably with C 2 H 6 over C 2 H 4 .