Engineering topics

Liu, Kun

Publications and source records attributed to Liu, Kun.

7 records

DOE OSTI2025

Repurposing Post-Consumer Polyethylene to Access Cross-Linked Polyethylene with Reprocessabilty, Recyclability, and Tunable Properties

Polyethylene (PE) is the most widely produced plastic but accumulation and resistance to degradation has significantly contributed to the plastic waste crisis. Upcycling has presented promising solutions to transform PE waste into value-added products. In this study, mixed post-consumer PE was successfully repurposed into reprocessable and chemically recyclable cross-linked polyethylene (XLPE). This process involved converting PE into telechelic oligomers, followed by repolymerization using a hybrid cross-linking system consisting of a dynamic cross-linker 2,4,6-triethoxy-1,3,5-triazine (TETA) and non-dynamic cross-linker tris(6-isocyanatohexyl)isocyanurate (Tri-HDI). In the resulting XLPE, TETA facilitated iterative reprocessing with minimal property degradation across cycles, whereas Tri-HDI helped preserve functional performance throughout service life. Compared to PE, XLPE exhibited enhanced mechanical properties, reduced creep deformation under application-relevant temperatures, and high temperature structural stability. Notably, copolymerizing PE oligomers with commercial macrodiols was employed to create composite XLPEs, enabling tuning material properties. After use, XLPE can be efficiently and selectively depolymerized under mild conditions, even when mixed with commercial insulator cables. This depolymerization allows for the recovery of the constituent building blocks, enabling purification and subsequent repolymerization for reuse. This approach demonstrates the potential of repurposing plastic waste into sustainable materials and fostering the development of a circular economy.

INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CHEMI↗

DOE OSTI2022

DarkQuest: A dark sector upgrade to SpinQuest at the 120 GeV Fermilab Main Injector

Expanding the mass range and techniques by which we search for dark matter is an important part of the worldwide particle physics program. Accelerator-based searches for dark matter and dark sector particles are a uniquely compelling part of this program as a way to both create and detect dark matter in the laboratory and explore the dark sector by searching for mediators and excited dark matter particles. This paper focuses on developing the DarkQuest experimental concept and gives an outlook on related enhancements collectively referred to as LongQuest. DarkQuest is a proton fixed-target experiment with leading sensitivity to an array of visible dark sector signatures in the MeV-GeV mass range. Because it builds off of existing accelerator and detector infrastructure, it offers a powerful but modest-cost experimental initiative that can be realized on a short timescale.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2022

Understanding the Origin of the Hadron Mass within the Standard Model

Understanding the origin of the hadron mass, which constitutes 99% of our visible universe, is one of the central goals of nuclear physics. Although the Higgs mechanism provides mass for the fundamental building blocks of matter, it can only contribute less than 2% of the proton mass. The vast majority of the proton mass is believed to come from the strong force that tightly binds quarks and gluons (collectively called partons) together as described by Quantum Chromodynamics (QCD). The mass that emerges as a consequence of the strong interactions within QCD is commonly denoted as Emergent Hadronic Mass (EHM). Understanding how the nucleon mass emerges in QCD is a prerequisite to an explanation of how the Universe came into being, therefore it is of utmost importance and one of the key questions to be addressed by the future Electron-Ion Collider (EIC). When it comes to light mesons, particularly pions, the mass decomposition is drastically different. Since the pion is naturally massless in the chiral limit, the majority of its observed mass needs to come from other mechanisms within QCD. Any successful explanation for the EHM needs to be able to reconcile both the heavy proton mass and the very light pion mass (~15% of proton mass) simultaneously. The EHM theories have direct measurable implications on the description of the internal structure of the hadron, i.e., how the partons distribute inside the hadron. Precise measurement of the parton distribution functions (PDFs) will provide necessary experimental verifications and constraints of potential EHM mechanisms. We propose to carry out a comprehensive study of the poorly known pion PDFs at the AMBER experiment at CERN. The measurement will provide vital input to constrain the global analysis of the pion PDFs, which are still based on limited data obtained more than 30 years ago. The proposed pion measurement is the only direct measurement achievable within this decade, which could lead to a future major meson structure program parallel to the EIC’s proton structure measurement.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2020

Long-wavelength-infrared laser filamentation in solids in the near-single-cycle regime

We experimentally demonstrate long-wavelength-infrared (LWIR) femtosecond filamentation in solids. Systematic investigations of supercontinuum (SC) generation and self-compression of the LWIR pulses assisted by laser filamentation are performed in bulk KrS-5 and ZnSe, pumped by ∼ <#comment/> 145 f s , 9 µm, 10 µJ pulses from an optical parametric chirped-pulse amplifier operating at 10 kHz of repetition rate. Multi-octave SC spectra are demonstrated in both materials. While forming stable single filament, 1.5 cycle LWIR pulses with 4.5 µJ output pulse energy are produced via soliton-like self-compression in a 5 mm thick KrS-5. The experimental results quantitatively agree well with the numerical simulation based on the unidirectional pulse propagation equation. This work shows the experimental feasibility of high-energy, near-single-cycle LWIR light bullet generation in solids.

Qu, Shizhen↗

DOE OSTI2020

CO2 mass transfer enhancement of aqueous amine solvents by particle additives

The present invention relates to methods for improving carbon capture by providing particles within an amine solvent. The particles provide for increased turbulence at the interface between the counter-flowing gas and solvent, which allows for increased amine and carbamate salt diffusion between the liquid film and bulk.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Wettability of ultra-small pores of carbon electrodes by size-asymmetric ionic fluids

Recently, we studied the phase behavior of ionic fluids under confinement using the classical density functional theory within the framework of the restricted primitive model. Additionally, the theoretical results indicate that narrowing the pore size may lead to a drastic reduction in the electric double layer capacitance, while increasing the surface electrical potential would improve the ionic accessibility of micropores. In this work, we extend the theoretical investigation to systems containing size-asymmetric electrolytes that may exhibit a vapor-liquid like phase transition in the bulk phase. The effects of pore size and surface electric potential on the phase diagram and microscopic structures of the confined electrolytes were studied over a broad range of parameters. We found that decreasing the pore size or increasing the surface potential could destabilize the liquid phase in micropores, and capillary evaporation could occur regardless of the size asymmetry between cations and anions. Compared to that in a symmetric ionic system, the vapor-liquid phase separation is more likely to take place as the size asymmetry becomes more pronounced. The phase transition would alter the “accessibility” of ions to micropores and lead to coexisting micropores with different surface charge densities as identified by Monte Carlo simulation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Insights from machine learning of carbon electrodes for electric double layer capacitors

Recent years have witnessed the broad use of carbon electrodes for electric double layer capacitors (EDLCs) because of large surface area, high porosity and low cost. Whereas experimental investigations are mostly focused on the device performance, computational studies have been rarely concerned with electrochemical properties at conditions remote from equilibrium, limiting their direct applications to materials design. Through a comprehensive analysis of extensive experimental data with various machine-learning methods, we report herein quantitative correlations between the structural features of carbon electrodes and the in-operando behavior of EDLCs including energy and power density. Machine learning allows us to identify important characteristics of activated carbons useful to optimize their efficiency in energy storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗