Search NASA⌕ Search

Engineering topics

Liu, Min

Publications and source records attributed to Liu, Min.

At least 19 records

Molecular Imaging Reveals Two Distinct Mixing States of PM 2.5 Particles Sampled in a Typical Beijing Winter Pollution Case

Mixing states of aerosol particles are crucial for understanding the role of aerosols in influencing air quality and climate. However, a fundamental understanding of the complex mixing states is still lacking because most traditional analysis techniques only reveal bulk chemical and physical properties with limited surface and 3-D information. In this research, 3-D molecular imaging enabled by ToF-SIMS was used to elucidate the mixing states of PM 2.5 samples obtained from a typical Beijing winter haze event. In light pollution cases, a thin organic layer covers separated inorganic particles, while in serious pollution cases, ion exchange and an organic-inorganic mixing surface on large-area particles were observed. Finally, the new results provide key 3-D molecular information of mixing states, which is highly desirable for reducing uncertainty and bias in representing aerosol-cloud interactions in current Earth System Models, and improving the understanding of aerosols on air quality and human health.

3-D molecular imaging↗

A swapped genetic code prevents viral infections and gene transfer

Engineering the genetic code of an organism has been proposed to provide a firewall from natural ecosystems by preventing viral infections and gene transfer. However, numerous viruses and mobile genetic elements encode parts of the translational apparatus, potentially rendering a genetic-code-based firewall ineffective. Here we show that such mobile transfer RNAs (tRNAs) enable gene transfer and allow viral replication in Escherichia coli despite the genome-wide removal of 3 of the 64 codons and the previously essential cognate tRNA and release factor genes. We then establish a genetic firewall by discovering viral tRNAs that provide exceptionally efficient codon reassignment allowing us to develop cells bearing an amino acid-swapped genetic code that reassigns two of the six serine codons to leucine during translation. This amino acid-swapped genetic code renders cells resistant to viral infections by mistranslating viral proteomes and prevents the escape of synthetic genetic information by engineered reliance on serine codons to produce leucine-requiring proteins. As these cells may have a selective advantage over wild organisms due to virus resistance, we also repurpose a third codon to biocontain this virus-resistant host through dependence on an amino acid not found in nature. Furthermore, our results may provide the basis for a general strategy to make any organism safely resistant to all natural viruses and prevent genetic information flow into and out of genetically modified organisms.

59 BASIC BIOLOGICAL SCIENCES↗

Atomically Local Electric Field Induced Interface Water Reorientation for Alkaline Hydrogen Evolution Reaction

The slow water dissociation process in alkaline electrolyte severely limits the kinetics of HER. The orientation of H 2 O is well known to affect the dissociation process, but H 2 O orientation is hard to control because of its random distribution. Herein, an atomically asymmetric local electric field was designed by IrRu dizygotic single-atom sites (IrRu DSACs) to tune the H 2 O adsorption configuration and orientation, thus optimizing its dissociation process. The electric field intensity of IrRu DSACs is over 4.00×10 10 N/C. The ab initio molecular dynamics simulations combined with in situ Raman spectroscopy analysis on the adsorption behavior of H 2 O show that the M–H bond length (M=active site) is shortened at the interface due to the strong local electric field gradient and the optimized water orientation promotes the dissociation process of interfacial water. This work provides a new way to explore the role of single atomic sites in alkaline hydrogen evolution reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Engineering a Self-Grown TiO 2 /Ti-MOF Heterojunction with Selectively Anchored High-Density Pt Single-Atomic Cocatalysts for Efficient Visible-Light-Driven Hydrogen Evolution

A photocatalyst TiO 2 /Ti-BPDC-Pt is developed with a self-grown TiO 2 /Ti-metal–organic framework (MOF) heterojunction, i.e., TiO 2 /Ti-BPDC, and selectively anchored high-density Pt single-atomic cocatalysts on Ti-BPDC for photocatalytic hydrogen evolution. This intimate heterojunction, growing from the surface pyrolytic reconstruction of Ti-BPDC, works in a direct Z-scheme, efficiently separating electrons and holes. Pt is selectively anchored on Ti-BPDC by ligands and is found in the form of single atoms with loading up to 1.8 wt %. The selective location of Pt is the electron-enriched domain of the heterojunction, which further enhances the utilization of the separated electrons. This tailored TiO 2 /Ti-BPDC-Pt shows a significantly enhanced activity of 12.4 mmol g -1 h -1 compared to other TiO 2 - or MOF-based catalysts. In conclusion, the structure-activity relationship further proves the balance of two simultaneously exposed domains of heterojunctions is critical to fulfilling this kind of catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Miktoarm Star Polymers: Synthesis and Applications

Polymers with precisely controlled structure and function are in high demand across a diverse array of applications spanning the life sciences and nanotechnology. One prototypical example is a class of branched block copolymers known as miktoarm stars (μ-stars), which contain two or more arm compositions connected at a common junction. Miktoarm stars have attracted considerable attention since their physical properties can be different from conventional linear block copolymers. This perspective highlights the latest developments and historical context in the field of miktoarm star polymers, including design strategies, synthetic techniques, and advanced characterization tools used to avoid common preparation pitfalls and tailor properties for emerging applications. Furthermore, our contemporary perspective on μ-star polymers is a resource for inspiring future research into this exciting class of materials at the intersection of chemistry, physics, and advanced technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomically dispersed Pt and Fe sites and Pt–Fe nanoparticles for durable proton exchange membrane fuel cells

Proton exchange membrane fuel cells convert hydrogen and oxygen into electricity without emissions. The high cost and low durability of Pt-based electrocatalysts for the oxygen reduction reaction hinder their wide application, and the development of non-precious metal electrocatalysts is limited by their low performance. Here we design a hybrid electrocatalyst that consists of atomically dispersed Pt and Fe single atoms and Pt–Fe alloy nanoparticles. Its Pt mass activity is 3.7 times higher than that of commercial Pt/C in a fuel cell. More importantly, the fuel cell with a low Pt loading in the cathode (0.015 mg Pt cm –2 ) shows an excellent durability, with a 97% activity retention after 100,000 cycles and no noticeable current drop at 0.6 V for over 200 hours. These results highlight the importance of the synergistic effects among active sites in hybrid electrocatalysts and provide an alternative way to design more active and durable low-Pt electrocatalysts for electrochemical devices.

25 ENERGY STORAGE↗

Numerical modeling of ion transport and adsorption in porous media: A pore-scale study for capacitive deionization desalination

In this report a pore-scale model is presented to simulate the dynamic ion transport and adsorption processes in porous electrodes used for capacitive deionization (CDI). The Stokes equation governing water flow is solved using the lattice Boltzmann method and Nernst-Planck equation describing ion transport is solved using the finite volume method. The ion adsorption process is considered at the surface of carbon electrodes. After validation against analytical solutions and published results, the model is used to study the coupled water flow, ion transport and adsorption in both two-dimensional and three-dimensional porous CDI electrodes at the pore scale. The effect of electrode microstructure, electrical potential and flow velocity on the adsorption processes is quantitatively investigated, and the relative importance of various parameters is determined. The presented model can be a powerful numerical tool to quantitatively analyze ion transport and adsorption in porous electrodes, and may provide useful information for the design and optimization of CDI electrodes and operating conditions for desired desalination efficiency, water throughput and cost.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Modulating Charge Transfer Efficiency of Hematite Photoanode with Hybrid Dual‐Metal–Organic Frameworks for Boosting Photoelectrochemical Water Oxidation

Abstract The glorious charge transfer efficiency of photoanode is an important factor for efficient photoelectrochemical (PEC) water oxidation. However, it is often limited by slow kinetics of oxygen evolution reaction. Herein, a dual transition metal‐based metal–organic frameworks (MOF) cocatalyst, Fe@Ni–MOF, is introduced into a titanium‐doped hematite (Fe 2 O 3 :Ti) photoanode. The combination of Ni and Fe can optimize the filling of 3d orbitals. Moreover, the introduction of Fe donates electrons to Ni in the MOF structure, thus, suppressing the irreversible (long‐life‐time) oxidation of Ni 2+ into Ni 3+ . The resulting Fe@Ni–MOF/Fe 2 O 3 :Ti photoanode exhibits ∼threefold enhancement in the photocurrent density at 1.23 V versus the reversible hydrogen electrode. Kinetic analysis of the PEC water oxidation processes indicates that this performance improvement is primarily due to modulating the charge transfer efficiency of hematite photoanode. Further results show that a single transition metal‐based MOF cocatalyst, Ni–MOF, exhibits slow charge transfer in spite of a reduction in surface charge recombination, resulting in a smaller charge transfer efficiency. These findings provide new insights for the development of photoelectrodes decorated with MOFs.

36 MATERIALS SCIENCE↗

Assessing concurrent effects of climate change on hydropower supply, electricity demand, and greenhouse gas emissions in the Upper Yangtze River Basin of China

Hydropower importantly provides flexible low-carbon electricity, however, climate change will affect the hydropower system through altering hydrologic regimes while also affecting electricity demands for heating and cooling that hydropower resources serve. This study assesses the effect of climate change on hydropower and electricity demand in the Upper Yangtze River Basin (UYRB) in China on the regional net electric load and greenhouse gas (GHG) emissions. This is accomplished by using climate projections from five global climate models (GCMs) to simultaneously force (1) a physically-based hydrological model and a statistically-based hydropower model to estimate the future generating capacity of 21 large hydropower plants in the UYRB and (2) an empirical electricity demand model accounting for socioeconomic and climatic factors. Under climate change, the projected hydropower generation in the UYRB tends to increase in the 21st century but is far less than the increase in electricity demand, increasing the gap between demand and supply. Future increases in overall electricity demand are driven by GDP growth, but climate change will alter the distribution of the seasonal electricity demand. Climate warming decreases electricity demand for heating in winter and increases electricity demand for cooling in summer, but ultimately increases demand. Meanwhile, there is an increasing mismatch between electricity demand and hydropower supply associated with inter- and intra-annual variations, owing to the temporal climate change and increase in compound climate extremes (droughts and heatwaves). Finally, meeting the gap between supply and demand due to climate change is estimated to contribute 79.0–184.6 and 50.6–316.2 MMT CO 2e /yr of additional GHG emissions by the mid and end of 21st century, respectively.

13 HYDRO ENERGY↗

Grain detachment and transport clogging during mineral dissolution in carbonate rocks with permeable grain boundaries

In this paper, we explore the effect of permeable grain boundaries on carbonate rock dissolution in order to improve our understanding of grain detachment and migration during reactive flow. To do so we investigated the effects of grain size and enhanced reactivity along grain boundaries on global dissolution kinetics. Variations of permeability and porosity were calculated, and exponential relationships were observed in fractured rocks. Our model employed a reactive transport framework based on the Darcy-Brinkman equation to simulate calcite dissolution in carbonate rocks composed of microporous grains and, included fluid transport along grain boundaries. The model includes fluid flow, solute transport by advection–diffusion, heterogeneous reaction between fluid and minerals and grain detachment with subsequent grain transport in macropores. The migration of solid particles due to dissolution was based on cluster analysis and local movement, and the results show that grain detachment can lead to significant decreases in permeability due to the clogging of transport pathways. Microporous media with smaller grain sizes (fine grains in this study) showed a higher average reaction rate than those with coarser grains. In addition, as the overall rates of geochemical processes are commonly affected by the presence of texture heterogeneities such as fractures, a single fracture (macropore) introduced into a microporous matrix composed of permeable grains and grain boundaries was modelled as a large channel connecting the inlet and outlet of the simulation domain. It was found that macropore clogging by grain detachment temporary decreased permeability, lowering the long-term global reaction rates. Lastly, we observed that increases in flow rate can reduce detachment and fracture clogging by reducing local dissolution along grain boundaries.

58 GEOSCIENCES↗

Cloud and Precipitation Properties of MCSs Along the Meiyu Frontal Zone in Central and Southern China and Their Associated Large-Scale Environments

This study focuses on investigating the cloud and precipitation features of Meiyu mesoscale convective systems (MCSs) and their relation to the large-scale environments in central and southern China using satellite observations and reanalysis data during the period 2014–2018. MCSs from two different locations, the Yangtze River Basin (YRB) and Southern China (SC), are examined separately. The Meiyu MCSs have a mean precipitation rate of 3.6 mm/hr and contribute 20% to 60% of the total precipitation during the Meiyu period. The diurnal cycle of Meiyu MCSs shows a maximum precipitation amount in the morning, which is associated with the enhanced nocturnal low-level jet (LLJ) overnight. Although the synoptic setups in YRB and SC are found to be similar when normalized around the MCS initiation locations, MCSs exhibit some differences in terms of the cloud top height, precipitation rate, and duration, which are likely by the differences in the local forcing. Large interannual variations are found in MCSs' number, cloud size, lifetime, and rainfall intensity, which is found to be associated with the interannual variabilities in the large-scale environments. By comparing the large-scale environments with climatological mean states, we find that the year with the most intense MCS activity during the study period is characterized by an intensified southwesterly LLJ, which increases the moisture transport from the Indian Ocean and an enhancement of the midtropospheric westerly jet, which induces adiabatic ascent along the Meiyu front, creating more favorable conditions for convection.

54 ENVIRONMENTAL SCIENCES↗