Search NASA⌕ Search

Engineering topics

Liu, Qian

Publications and source records attributed to Liu, Qian.

At least 19 records

Impact of Electrolyte Additives on the Lifetime of High Voltage NMC Lithium-Ion Pouch Cells

This work involves improving the lifetime of lithium-ion cells during high voltage cycling using electrolyte additives. Three generations of electrolyte additives were investigated and screened in NMC442/graphite pouch cells using a 24 h voltage-hold protocol at 40 degrees C to accelerate oxidative reactions occurring at 4.4 V. Once promising additives and combinations were identified, they were then tested in cobalt-free NMC640/graphite cells for long-term cycling to upper cutoff voltages of 4.3, 4.4, and 4.5 V at temperatures of 20, 40, and 55 degrees C. Degradation mechanisms were probed using dV/dQ analysis, micro-X-ray fluorescence spectroscopy, and electrochemical impedance spectroscopy. The primary failure mode of cells held at high voltages is due to increase in cell impedance, which is correlated to the dissolution of transition metals, specifically manganese, originating from the positive electrode. We believe this dissolution is presumably due to the formation of a high impedance rock salt surface layer on the NMC positive electrode particles. Such deleterious outcomes can be limited by selecting an appropriate electrolyte additive package. It is hoped that this paper can provide a starting point for developing NMC Li-ion cells that can operate to voltages as high as 4.4 V and still display long lifetimes.

Azam, Saad↗

High‐Energy LiNiO 2 Li Metal Batteries Enabled by Hybrid Electrolyte Consisting of Ionic Liquid and Weakly Solvating Fluorinated Ether

Abstract In pursuit of the highest possible energy density, researchers shift their focus to the ultimate anode material, lithium metal (Li 0 ), and high‐capacity cathode materials with high nickel content (Ni > 80%). The combination of these aggressive electrodes presents unprecedented challenges to the electrolyte. Here, we report a hybrid electrolyte consisting of a highly fluorinated ionic liquid and a weakly solvating fluorinated ether, whose hybridization structure enables the reversible operation of a battery chemistry based on Li 0 and LiNiO 2 (Ni = 100%), delivering nearly theoretical capacity of the latter (up to 249 mAh g −1 ) for >300 cycles with retention of 78.6% and in absence of unwanted morphological changes in both electrodes. Extensive characterization assisted by molecular dynamic simulation and density functional theory calculations reveals the function of the fluorinated ether to be far more profound than simple dilution and viscosity reduction. Instead, it induces drastic changes in Li + ‐solvation environment, the consequence of which engenders simultaneous stabilization of electrode/electrolyte and interfacing via formation of respective interfacial chemistries. This study further unlocks fundamental knowledge underneath the prevailing “diluent strategy” that is extensively applied by the electrolyte researchers and opens more design space for the next‐generation electrolytes and interphases for these coveted battery chemistries.

25 ENERGY STORAGE↗

A Fluorinated Lewis Acidic Organoboron Tunes Polysulfide Complex Structure for High–Performance Lithium–Sulfur Batteries

Many challenges in lithium-sulfur (Li–S) batteries are associated with the radical change in lithium polysulfide (LPS) solubility during cycling, but chemical approaches to address such inconsistency are still lacking. Here, the use of a strong Lewis acidic fluorinated organoboron, tri(2,2,2-trifluoroethyl) borate (TFEB), is reported as a multi-functional mediator to simultaneously overcome multiple technical barriers in practical Li–S batteries. TFEB acts as an anion acceptor and forms strong molecular complexes with Lewis basic LPS. The TFEB-LPS complexes have consistent solubility across the full polysulfide spectrum and deliver several times improved better redox kinetics, unlocking a true redox catalytic mechanism that covers the majority of redox events in thick sulfur cathodes. As a result, Li–S batteries evaluated under practical conditions exhibit significantly improved discharge capacity, rate capability, and cycling stability with the addition of the TFEB additive. More importantly, TFEB also contributes to the stabilization of lithium anode in the presence of polysulfides by generating strong interfacial film. These attributes significantly improve the cycling stability of practical Li–S pouch cells, which are assembled with a unit energy density of 219 Wh kg –1 . Finally, the results provide new molecular insights on the design of unlocking solvation networks of practical Li–S systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Measurement-Based Approach for Inertia-Trend Analysis of the US Western Interconnection

Rising deployment of inverter-based resources (IBRs), characterized by a lack of rotating mass, is decreasing the total inertia of the system. This can lead to an increased Rate of Change of Frequency (RoCoF) during the disturbance and false activation of protective devices. There is a need to assess the inertia over the past decade amidst the evolving landscape of renewable energy sources to develop strategies for integrating energy storage, enhancing resilience measures, and ensuring the stable and reliable operation of the grid. Therefore, a realistic assessment of the inertia trend using a measurement-based approach that addresses the limitations of existing models is proposed. An inertia study of the Western Interconnection in the United States is performed utilizing the data from 2013 to 2022, obtained from FNET/ GridEye network. The three-second RoCoF time window is chosen for the study as it showed an optimum balance between a strong correlation with the power imbalance (ΔP) and minimum inclusion of primary response from governor. The obtained inertia trend result shows a small percentage declination of inertia over the decade. By examining the result alongside a generation mix graph, insights are gained into the dynamic interplay between shifting energy landscape and system inertia.

Dulal, Saurav↗

Ionic liquid electrolyte for lithium-ion batteries

The ionic liquids disclosed herein are salts comprising a nitrogen or phosphorus such as a quaternary ammonium ion, a quaternary phosphonium ion, or an N-alkylated nitrogen heterocycle, and which include at least one functional substituent, e.g., a fluoro, cyano, carbonate ester, an alkenyl group, or an alkynyl group bonded to a carbon atom the cation. In a preferred embodiment, the cation is represented by the structure of Formula (I) as described herein.

Zhang, Zhengcheng↗

A fluorinated cation introduces new interphasial chemistries to enable high-voltage lithium metal batteries

Abstract Fluorides have been identified as a key ingredient in interphases supporting aggressive battery chemistries. While the precursor for these fluorides must be pre-stored in electrolyte components and only delivered at extreme potentials, the chemical source of fluorine so far has been confined to either negatively-charge anions or fluorinated molecules, whose presence in the inner-Helmholtz layer of electrodes, and consequently their contribution to the interphasial chemistry, is restricted. To pre-store fluorine source on positive-charged species, here we show a cation that carries fluorine in its structure is synthesized and its contribution to interphasial chemistry is explored for the very first time. An electrolyte carrying fluorine in both cation and anion brings unprecedented interphasial chemistries that translate into superior battery performance of a lithium-metal battery, including high Coulombic efficiency of up to 99.98%, and Li 0 -dendrite prevention for 900 hours. The significance of this fluorinated cation undoubtedly extends to other advanced battery systems beyond lithium, all of which universally require kinetic protection of highly fluorinated interphases.

25 ENERGY STORAGE↗

Rational Design of Fluorinated Electrolytes for Low Temperature Lithium‐Ion Batteries

Abstract Nonaqueous carbonate electrolytes are commonly used in commercial lithium‐ion battery (LIB). However, the sluggish Li + diffusivity and high interfacial charge transfer resistance at low temperature (LT) limit their wide adoption among geographical areas with high latitudes and altitudes. Herein, a rational design of new electrolytes is demonstrated, which can significantly improve the low temperature performance below −20 °C. This electrolyte is achieved by tailoring the chemical structure, i.e., altering the fluorination position and the degree of fluorination, of ethyl acetate solvent. It is found that fluorination adjacent to the carbonyl group or high degree of fluorination leads to a stronger electron‐withdrawing effect, resulting in low atomic charge on the carbonyl oxygen solvating sites, and thus low binding energies with Li + ions at LT. The optimal electrolyte 2,2,2‐trifluoroethyl acetate (EA‐f) shows significantly improved cycle life and C‐rate of a NMC622/graphite cell when cycled at −20 °C and −40 °C, respectively. In addition to superior LT performance, the electrolyte is nonflammable and tolerant for high voltage charging all owing to its fluorine content. This work provides guidance in designing next‐generation electrolytes to address the critical challenge at subzero temperatures.

25 ENERGY STORAGE↗

Disordered Au Nanoclusters for Efficient Ammonia Electrosynthesis

The electrochemical nitrogen (N 2 ) reduction reaction (N 2 RR) under mild conditions is a promising and environmentally friendly alternative to the traditional Haber-Bosch process with high energy consumption and greenhouse emission for the synthesis of ammonia (NH 3 ), but high-yielding production is rendered challenging by the strong nonpolar N≡N bond in N 2 molecules, which hinders their dissociation or activation. In this study, disordered Au nanoclusters anchored on two-dimensional ultrathin Ti 3 C 2 T x MXene nanosheets are explored as highly active and selective electrocatalysts for efficient N 2 -to-NH 3 conversion, exhibiting exceptional activity with an NH 3 yield rate of 88.3±1.7 μg h –1 mg cat. –1 and a faradaic efficiency of 9.3±0.4 %. Further, a combination of in situ near-ambient pressure X-ray photoelectron spectroscopy and operando X-ray absorption fine structure spectroscopy is employed to unveil the uniqueness of this catalyst for N 2 RR. The disordered structure is found to serve as the active site for N 2 chemisorption and activation during the N 2 RR process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Performance of a Novel In-Situ Converted Additive for High Voltage Li-ion Pouch Cells

In search for new classes of additives for high voltage NMC/graphite lithium-ion cells, the precursor additive bis(trimethylsilyl) malonate (bTMSM) is shown to be activated via a spontaneous reaction with LiPF 6 and LiBF 4 salts in carbonate-based electrolyte to form lithium tetrafluoro(malonato)phosphate (LiTFMP), and lithium difluoro(malonato)borate (LiDFMB), respectively. The reaction schemes and rates were studied via NMR spectroscopy and GCMS. The effects of LiTFMP and LiDFMB on high voltage electrochemical performance were then examined up to 4.5 V in Li[Ni 0.4 Mn 0.4 Co 0.16 ]O 2 (NMC442)/graphite and Li[Ni 0.6 Mn 0.4 Co 0.0 ]O 2 (NMC/640)/graphite pouch cells using aggressive voltage-hold cycling, long-term charge/discharge cycling, storage experiments, electrochemical impedance spectroscopy, and gas evolution measurements. While in situ converted additives suffer from gassing issues due to the presence of trimethylfluorosilane (TMSF) gas, a side product of the in situ reaction of bTMSM with LiPF 6 , the cycling and storage capability for the activated additives under study shows competitive performance and controlled impedance when compared to other well-known high voltage additives. Micro X-ray fluorescence spectroscopy (μXRF) confirmed that LiTFMP successfully minimizes the rate of transition metal deposition on the surface of graphite apparently by forming a protective agent at the cathode surface, hence allowing for improved cycling performance at high voltages.

25 ENERGY STORAGE↗

Measurement of muon-induced neutron yield at the China Jinping Underground Laboratory *

Abstract Solar, terrestrial, and supernova neutrino experiments are subject to muon-induced radioactive background. The China Jinping Underground Laboratory (CJPL), with its unique advantage of a 2400 m rock coverage and long distance from nuclear power plants, is ideal for MeV-scale neutrino experiments. Using a 1-ton prototype detector of the Jinping Neutrino Experiment (JNE), we detected 343 high-energy cosmic-ray muons and (7.86 3.97) muon-induced neutrons from an 820.28-day dataset at the first phase of CJPL (CJPL-I). Based on the muon-induced neutrons, we measured the corresponding muon-induced neutron yield in a liquid scintillator to be μ −1 g −1 cm 2 at an average muon energy of 340 GeV. We provided the first study for such neutron background at CJPL. A global fit including this measurement shows a power-law coefficient of (0.75 0.02) for the dependence of the neutron yield at the liquid scintillator on muon energy.

Zhao, Lin↗

An Advanced Open-Source Platform for Air Quality Analysis, Visualization, and Prediction

Ambient air pollution is the largest environmental health risk factor, leading to several million premature deaths globally per year. The challenge of combating poor air quality is exacerbated by growing urban populations, changing emissions, and a warming climate. While there have been many advances monitoring and modeling of atmospheric composition, reflected in the dramatic increase in archived Earth Observations, there is no single measurement or method that alone can provide an accurate depiction of the entire atmosphere. The rapidly growing collections of observational and modeling data require us to be smarter about what data to include, and how such data is used. In recent years, NASA has invested significantly in advancing the concepts for Analytics Collaborative Framework (ACF) [5] and New Observing Strategies (NOS) [4] to tackle our software infrastructure need for harmonized data management and dynamic acquisition of diverse measurements for on-demand, interactive, multivariate analysis, and access [3]. It is not enough to have a big data, standalone analytics solution; it is critical that we start integrating data from remote sensing, modeling, and in-situ networks in a harmonized manner that enables timely and data-driven decision-making for air quality management. This work presents the design and development of an Air Quality Analytics Collaborative Framework (AQ ACF), as part of NASA’s Advanced Information Systems Technology (AIST) effort, to establish a data, machine-learning, and numerically driven platform for air quality analysis, visualization, and prediction.

Liu, Qian↗

Enabling Non-Carbonate Electrolytes for Silicon Anode Batteries Using Fluoroethylene Carbonate

Silicon is considered as one of the most promising anodes for next generation lithium-ion batteries, due to its high theoretical capacity and energy density. However, many technical barriers remain to its implementation, due to its high chemical/electrochemical reactivities with standard electrolytes and incomplete passivation. In this work, we take the most effective passivating additive of fluoroethylene carbonate (FEC) and study its impact on non-carbonate electrolytes. Our results indicate that esters and ureas-based electrolytes are similarly stabilized by FEC, and have very similar capacity retentions and Coulombic efficiencies to the state-of-the-art carbonate electrolyte. This study indicates the discovery of more efficient additives other than FEC is vital in developing an electrolyte that can successfully enable a silicon-anode battery.

25 ENERGY STORAGE↗

Understanding the Role of SEI Layer in Low-Temperature Performance of Lithium-Ion Batteries

Low-temperature electrolytes (LTEs) have been considered as one of the most challenging aspects for the wide adoption of lithium-ion batteries (LIBs) since the SOA electrolytes cannot sufficiently support the redox reactions at LT resulting in dramatic performance degradation. Although many attempts have been taken by employing various noncarbonate solvent electrolytes, there was a lack of fundamental understanding of the limiting factors for low-temperature operations (e.g., -20 to -40 degrees C). Here, the crucial role of the solid-electrolyte-interface (SEI) in LIB performance at low temperature using a butyronitrile (BN)-based electrolyte was demonstrated. These results suggested that an additive formed SEI with low resistance and low charge transfer dictates the LT performance in terms of capacity and cycle life, presenting a useful guideline in designing new electrolytes to address the LT issue.

25 ENERGY STORAGE↗

Enabling Silicon Anodes with Novel Isosorbide-Based Electrolytes

Silicon is seen as one of the most promising anode candidates for next-generation lithium-ion batteries, due to its high theoretical capacity and energy density. However, many technical barriers remain to its implementation, due to its high chemical/electrochemical reactivities with standard electrolytes and incomplete passivation from large volume changes. Herein, we report an isosorbide dimethyl ether (IDE) based electrolyte, which exhibits greatly improved stability, as evidenced by long cycle life and calendar life. An analysis of the cycled silicon surface shows minimal decomposition of organic species from IDE solvent, confirming that the electrolyte maintains a limited chemical reactivity with nucleophilic lithiated silicon (Li x Si). Here, this research opens up new avenues for designing new electrolytes which could ultimately enable the practical application of silicon anodes.

25 ENERGY STORAGE↗

A chemical switch enabled autonomous two-stage crosslinking polymeric binder for high performance silicon anodes

Silicon (Si) is a promising high-capacity anode material for high-energy-density lithium-ion batteries. However, the drastic volumetric changes of Si upon lithiation/delithiation hinder the practical use of Si anodes. Although adhesive polymeric binders, such as poly(acrylic acid) (PAA), mitigate this issue, the cycling performance of the fabricated Si anodes is still far from meeting the criteria of practical applications. In this study, we present a novel polymeric binder system for Si anodes consisting of PAA, a chemical switch (ammonia, NH 3 ), and a crosslinker (branched polyethylenimine, PEI). The crosslinking between PAA and PEI is switched off in the slurry, which can then be turned on during electrode drying. Interestingly, the crosslinking reaction consists of two stages: ionic cross-linking (PAA-PEI-i) and covalent crosslinking (PAA-PEI-c) at a higher temperature (e.g., 130 °C). In half-cells, Si anodes fabricated using the PAA-PEI-c binder show a 67% increase in capacity retention compared to PAA anodes over 150 cycles at C/3 rate. The PAA-PEI-c binder also outperforms PAA in full cells. In addition, the chemical switch controlled crosslinking binder system also facilitates the slurry making process by avoiding early crosslinking. This system requires no additional steps compared to the conventional electrode lamination process, showing enormous potential for direct adoption in large-scale manufacturing.

25 ENERGY STORAGE↗

An Environmentally Benign Electrolyte for High Energy Lithium Metal Batteries

In this work, a hybrid electrolyte comprising a high content of H 2 O for a lithium metal cell is reported. At high LiFSI salt concentration, the N-methyl-N-propyl-piperidinium bis(fluorosulfonyl) imide (PMpipFSI) electrolyte can tolerate up to 1 M H2O addition without sacrificing its redox stability on both lithium nickel manganese cobalt oxide (NMC) cathode and lithium metal anode. Molecular dynamics simulations revealed the underpinned mechanism that, at high salt concentrations, H 2 O molecules are embedded in the Li + , PMpip + , and FSI - bulk as a structural material with a strong solvation with Li + and are orderly distributed at the surface of both electrodes. This electrolyte eliminates the critical moisture controls required for the state-of-the-art (SOA) carbonate/LiPF 6 electrolyte, electrode, separator and cell assembly, thus significantly reducing the cost of the mass production of the batteries.

molecular dynamics simulation↗

The Relationship Between Perceived Control and Hypothalamic–Pituitary–Adrenal Axis Reactivity to the Trier Social Stress Test in Healthy Young Adults

Psychological factors can modulate the hypothalamic–pituitary–adrenal (HPA) axis activity toward stressors. Animal studies demonstrated that uncontrollability was one critical factor associated with HPA axis stress response, but the results in human studies were inconsistent. The current study adopted a standardized laboratory stress induction procedure, the Trier Social Stress Test (the TSST), as the stressor to regulate the objective controllability level, and young adult participants were asked to rate their subjectively perceived control level toward the stressor and measured their cortisol stress responses ( N =54; 19 females and 35 males) to address this concern. Results showed that participants’ perceived control on the TSST was related to the cortisol stress response. In other words, under the stress of a certain objective controllability level, the lower the subjectively perceived control level, the greater the HPA axis response. This finding suggested that, in addition to objective controllability, subjectively perceived control is a psychological factor that regulates activation of the HPA axis in young adults.

Liu, Qian↗