Engineering topics

Liu, Ruiyan

Publications and source records attributed to Liu, Ruiyan.

3 records

DOE OSTI2023

Continuous wave room temperature operation of the 2 $μ$m GaSb-based photonic crystal surface emitting diode lasers

Continuous wave room temperature operation of 2 μm GaSb-based photonic-crystal surface-emitting diode lasers has been realized. The deep etched square mesa devices showed threshold current densities of 500 A/cm 2 at 20 °C. The epi-side down mounted lasers generated above 10 mW of output power in the continuous wave regime and tens of milliwatts in pulses from the 200 × 200 μm 2 aperture. Here, the breakthrough in the device performance parameters was achieved thanks to a highly homogeneous air-pocket retaining epitaxial regrowth process optimized for a specifically designed antimonide diode laser heterostructure. The nanofabrication method utilizing low temperature atomic hydrogen surface cleaning yielded low disorder square lattice of droplet-shaped voids covered by uniform p-cladding layer. The laser emission spectrum as well as near/far field patterns demonstrated peculiar features presumably linked to deformation of the void shape during regrowth and formation of the array of filaments.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2022

Photonic Crystal Surface Emitting Diode Lasers with λ near 2 µm

Epitaxially regrown electrically pumped photonic crystal surface emitting lasers (PCSELs) operating near 2 µm were designed and fabricated within a III-V-Sb material system. A high-index-contrast photonic crystal layer was incorporated into the laser heterostructures by air-pocket-retaining epitaxial regrowth. Transmission electron microscopy studies confirmed uniform and continuous AlGaAsSb initial growth over the nano-patterned GaSb surface, followed by the development of the air-pockets. The PCSEL threshold current density had a minimal value of ~170 A/cm 2 in the 160–180 K temperature range when the QW gain spectrum aligned with the Γ 2 band edge of the photonic crystal. The devices operated in a continuous wave regime at 160 K. The divergence and polarization of the multimode laser beam emitted from the 200 µm × 200 µm PCSEL aperture were controlled by filamentation.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Electrically Pumped Epitaxially Regrown GaSb-Based Type-I Quantum-Well Surface-Emitting Lasers with Buried High-Index-Contrast Photonic Crystal Layer

Epitaxially regrown electrically pumped photonic crystal surface-emitting lasers (PCSELs) emitting near 2 and 2.6 μm are designed, fabricated, and characterized. A high-index-contrast photonic crystal layer is incorporated into the GaSb-based laser heterostructure by air-hole-retaining epitaxial regrowth. A square lattice of triangular holes is etched in the top waveguide core layer of the incomplete laser heterostructure. The nanopatterned surface is subsequently cleaned and regrown with AlGaAsSb p-cladding material. Transmission electron microscopy studies demonstrate uniform regrowth over the nanopatterned GaSb surface. The selected regrowth regimes yield a buried 2D array of elongated air-holes. The diode PCSELs based on moderately etched nanopatterns demonstrate band-edge lasing near 2 μm up to room temperatures. The cascade diode PCSELs operate near 2.6 μm with minimum threshold current densities of about 500 A cm -2 achieved at 180 K. The devices generate mW level output in narrow divergence beam emitted from the window in substrate contact. The angle-resolved electroluminescence measurements reveal a four-sub-band band structure with an apparent photonic bandgap corresponding to the buried high-index-contrast square photonic crystal layer. Finally, the PCSELs made of heterostructures supporting two modes in the vertical direction demonstrate two sets of sub-bands showing anti-crossing-like interaction.

77 NANOSCIENCE AND NANOTECHNOLOGY↗