Engineering topics
Liu, W
Publications and source records attributed to Liu, W.
Mechanism for KRIT1 Release of ICAP1-Mediated Suppression of Integrin Activation
Abstract not provided
Structural Basis for Small G Protein Effector Interaction of Ras-related Protein 1 (Rap1) and Adaptor Protein Krev Interaction Trapped 1 (KRIT1)
Cerebral cavernous malformations (CCMs) affect 0.1-0.5% of the population resulting in leaky vasculature and severe neurological defects. KRIT1 (Krev interaction trapped-1) mutations associate with {approx}40% of familial CCMs. KRIT1 is an effector of Ras-related protein 1 (Rap1) GTPase. Rap1 relocalizes KRIT1 from microtubules to cell membranes to impact integrin activation, potentially important for CCM pathology. We report the 1.95 {angstrom} co-crystal structure of KRIT1 FERM domain in complex with Rap1. Rap1-KRIT1 interaction encompasses an extended surface, including Rap1 Switch I and II and KRIT1 FERM F1 and F2 lobes. Rap1 binds KRIT1-F1 lobe using a GTPase-ubiquitin-like fold interaction but binds KRIT1-F2 lobe by a novel interaction. Point mutagenesis confirms the interaction. High similarity between KRIT1-F2/F3 and talin is revealed. Additionally, the mechanism for FERM domains acting as GTPase effectors is suggested. Finally, structure-based alignment of each lobe suggests classification of FERM domains as ERM-like and TMFK-like (talin-myosin-FAK-KRIT-like) and that FERM lobes resemble domain 'modules.'
THE HYDROMAGNETIC INTERIOR OF A SOLAR QUIESCENT PROMINENCE. I. COUPLING BETWEEN FORCE BALANCE AND STEADY ENERGY TRANSPORT
This series of papers investigates the dynamic interiors of quiescent prominences revealed by recent Hinode and SDO/AIA high-resolution observations. This first paper is a study of the static equilibrium of the Kippenhahn-Schlueter diffuse plasma slab, suspended vertically in a bowed magnetic field, under the frozen-in condition and subject to a theoretical thermal balance among an optically thin radiation, heating, and field-aligned thermal conduction. The everywhere-analytical solutions to this nonlinear problem are an extremely restricted subset of the physically admissible states of the system. For most values of the total mass frozen into a given bowed field, force balance and steady energy transport cannot both be met without a finite fraction of the total mass having collapsed into a cold sheet of zero thickness, within which the frozen-in condition must break down. An exact, resistive hydromagnetic extension of the Kippenhahn-Schlueter slab is also presented, resolving the mass-sheet singularity into a finite-thickness layer of steadily falling dense fluid. Our hydromagnetic result suggests that the narrow, vertical prominence H{sub {alpha}} threads may be falling across magnetic fields, with optically thick cores much denser and ionized to much lower degrees than conventionally considered. This implication is discussed in relation to (1) the recent SDO/AIA observations of quiescent prominences that are massive and yet draining mass everywhere in their interiors, (2) the canonical range of 5-60 G determined from spectral polarimetric observations of prominence magnetic fields over the years, and (3) the need for a more realistic multi-fluid treatment.
Generation of Picosecond Electron-Bunch Trains with Variable Spacing Using a Multi-Pulse Photocathode Laser
We demonstrate the generation of a train of electron bunches with variable spacing at the Argonne Wakefield Accelerator. The photocathode ultraviolet laser pulse consists of a train of four pulses produced via polarization splitting using two alpha-BBO crystals. The photoemitted electron bunches are then manipulated in a horizontally-bending dogleg with variable longitudinal dispersion. A downstream vertically-deflecting cavity is then used to diagnose the temporal profile of the electron beam. The generation of a train composed of four bunches with tunable spacing is demonstrated. Such a train of bunch could have application to, e.g., the resonant excitation of wakefield in dielectric-lined structures. We have presented preliminary measurements on a simple technique to generate a train of electron bunches with variable separation. In the initial experiment appreciable density modulation down to wavelengths of {approx}1.8 mm (corresponding to a temporal separation of {approx}6 ps) were achieved for a total charge of 0.5 nC. Finding ways to reach smaller separations is being explored with the help of numerical simulations and will be presented elsewhere.
Thermal Equation of State of CaIrO3 Post-perovskite
The pressure-volume-temperature (P-V-T) relation of CaIrO{sub 3} post-perovskite (ppv) was measured at pressures and temperatures up to 8.6 GPa and 1,273 K, respectively, with energy-dispersive synchrotron X-ray diffraction using a DIA-type, cubic-anvil apparatus (SAM85). Unit-cell dimensions were derived from the Le Bail full profile refinement technique, and the results were fitted using the third-order Birth-Murnaghan equation of state. The derived bulk modulus K{sub T0} at ambient pressure and temperature is 168.3 {+-} 7.1 GPa with a pressure derivative K{sub T0} = 5.4 {+-} 0.7. All of the high temperature data, combined with previous experimental data, are fitted using the high-temperature Birch-Murnaghan equation of state, the thermal pressure approach, and the Mie-Grueneisen-Debye formalism. The refined thermoelastic parameters for CaIrO{sub 3} ppv are: temperature derivative of bulk modulus ({partial_derivative}K{sub T}/{partial_derivative}T){sub P} = -0.038 {+-} 0.011 GPa K{sup -1}, {alpha}K{sub T} = 0.0039 {+-} 0.0001 GPa K{sup -1}, ({partial_derivative}K{sub T}/{partial_derivative}T){sub V} = -0.012 {+-} 0.002 GPa K{sup -1}, and ({partial_derivative}{sup 2}P/{partial_derivative}T{sup 2}){sub V} = 1.9 {+-} 0.3 x 10{sup -6} GPa{sup 2} K{sup -2}. Using the Mie-Grueneisen-Debye formalism, we obtain Grueneisen parameter {gamma}{sub 0} = 0.92 {+-} 0.01 and its volume dependence q = 3.4 {+-} 0.6. The systematic variation of bulk moduli for several oxide post-perovskites can be described approximately by the relationship K{sub T0} = 5406.0/V(molar) + 5.9 GPa.
Synchrotron X-ray Study of Filled Skutterudites CeFe4Sb12 and Ce0.8Fe3CoSb12
In situ synchrotron X-ray diffraction measurements are carried out on filled skutterudites CeFe{sub 4}Sb{sub 12} and Ce{sub 0.8}Fe{sub 3}CoSb{sub 12} up to 32 and 20 GPa, respectively, at room temperature. No phase transformation was observed for both samples in the pressure range. Fitting the pressure-volume data (up to 10 GPa) to the third-order Birch-Murnaghan equation of state, the bulk modulus B{sub 0} is determined to be 74(4) GPa, with the pressure derivative B'{sub 0} = 7(2) for CeFe{sub 4}Sb{sub 12}, and B{sub 0} = 71(2) GPa and B'{sub 0} = 8(2) for Ce{sub 0.8}Fe{sub 3}CoSb{sub 12}. The bulk moduli of filled skutterudites CeFe{sub 4}Sb{sub 12} and Ce{sub 0.8}Fe{sub 3}CoSb{sub 12} in our study are smaller than those from previous studies on unfilled skutterudite CoSb{sub 3}. The P-V curves of the unfilled skutterudite CoSb{sub 3} and filled skutterudites CeyFe{sub 4-x}Co{sub x}Sb{sub 12} showed good agreement, indicating that the Ce filling fraction and the replacement of Fe with Co have little effect on their compression behaviors.
Density and Elasticity of Zr46Cu37.6Ag8.4Al8 Bulk Metallic Glass at High Pressure
Compressional and shear wave velocities of Zr{sub 46}Cu{sub 37.6}Ag{sub 8.4}Al{sub 8} bulk metallic glass (BMG) have been measured up to 6.3 GPa at room temperature using ultrasonic interferometry in conjunction with synchrotron X-radiography. The densities at high pressures are uniquely determined using the measured velocities. The experimental results for the elastic moduli of Zr{sub 46}Cu{sub 37.6}Ag{sub 8.4}Al{sub 8} show a reasonable agreement with the Voigt-Reuss-Hill approximation of the element metal phases, indicating that the elastic properties of the BMG have a close correlation with its constituent components.
Isotropic Thermal Expansivity and Anisotropic Compressibility of ReB2
We experimentally investigated some of the mechanical properties of ReB{sub 2} under high temperature/pressure (T/P) conditions. High-T experiments (up to 600 C at 1 atm) were carried out in a high-T oven attached to a conventional X-ray diffractometer whereas high-P experiments (up to about 42 GPa at 25 C) were conducted in a diamond-anvil cell using synchrotron X-ray radiation. High-T data suggest a highly isotopic thermal expansivity whereas high-P data suggest a highly anisotropic compressibility for ReB{sub 2}.
Elasticity of Wadsleyite at 12 GPa1073K
Elasticity of (Mg{sub 0.87}Fe{sub 0.13}){sub 2}SiO{sub 4} wadsleyite has been measured at simultaneous high pressure and high temperature to 12 GPa and 1073 K using ultrasonic interferometry in conjunction with synchrotron X-radiation. The elastic moduli and their pressure and temperature derivatives are precisely determined using pressure-standard-free third-order and fourth-order finite strain equations. Combined with previous thermoelastic data on olivine, the density, velocity and acoustic impedance contrasts between {alpha}- and {beta}-(Mg{sub 0.9}Fe{sub 0.1}){sub 2}SiO{sub 4} at 410-km depth are calculated along a 1673 K adiabatic geotherm. Both the third- and fourth-order finite strain equation fitting results give estimation of {approx}33-58% olivine content in the upper mantle to account for a seismic discontinuity of {approx}5% velocity jumps, and 8.5% (P wave) and 11.1% (S wave) impedance jumps at 410 km depth.
Acoustic Velocities and Elastic Properties of Pyrite (FeS2) to 9.6 GPa
Ultrasonic interferometry was utilized in conjunction with synchrotron-based X-ray diffraction and X-radiographic imaging to determine the compressional and shear wave velocities and unit-cell volumes of pyrite (FeS{sub 2}) at room temperature and pressures up to 9.6 GPa. Fitting all of the experimental volume and velocity data to third-order finite-strain equations yielded the adiabatic zero-pressure bulk and shear moduli and their first pressure derivatives: K{sub S0}=138.9(7) GPa, G{sub 0}=112.3(3) GPa, ({partial_derivative} K{sub S0}/{partial_derivative} P){sub T} =K{sub S0'}=6.0(1), ({partial_derivative}G{sub 0}/{partial_derivative}P){sub T} =G{sub 0'}=3.0(<1), where the numbers in parentheses represent the 1{sigma} uncertainty in the last significant digit. These results are in good agreement with several previous static compression studies on this material but differ quite strongly from the results obtained via first principles calculations. This study presents the first direct measurement of the bulk shear properties of this material.
Characterization and modeling of heterogeneous deformation in commercial purity titanium
Abstract not provided
Observations and Modeling of Debris and Shrapnel Impacts on Optics and Diagnostics at the National Ignition Facility
A wide range of targets with laser energies spanning two orders of magnitude have been shot at the National Ignition Facility (NIF). The National Ignition Campaign (NIC) targets are cryogenic with Si supports and cooling rings attached to an Al thermo-mechanical package (TMP) with a thin (30 micron) Au hohlraum inside. Particular attention is placed on the low-energy shots where the TMP is not completely vaporized. In addition to NIC targets, a range of other targets has also been fielded on NIF. For all targets, simulations play a critical role in determining if the risks associated with debris and shrapnel are acceptable. In a number of cases, experiments were redesigned, based on simulations, to reduce risks or to obtain data. The majority of these simulations were done using the ALE-AMR code, which provides efficient late-time (100-1000X the pulse duration) 3D calculations of complex NIF targets.