Search NASA⌕ Search

Engineering topics

Liu, W

Publications and source records attributed to Liu, W.

At least 109 records · Page 6

7.8 GHz High Power Generation And Extraction With A Dielectric-loaded Waveguide

In this paper, we present updated results on power extraction testing of a 7.8 GHz dielectric loaded waveguide power extractor using both high charge single bunches and bunch trains. We have generated a 1.7 ns radio frequency (rf) pulse with 30 MW of power with a single 66 nC electron bunch. Then we have generated a pulse train of electron beam for rf generation of 10 ns and 22 ns rf pulses.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Update on the Development of Externally Powered Dielectric-Loaded Accelerating Structures

We report on recent progress in a program to develop an RF-driven Dielectric-Loaded Accelerating (DLA) structure, capable of supporting high gradient acceleration. Previous high power tests revealed that the earlier DLA structures suffered from multipactor and arcing at the dielectric joint. A few new DLA structures have been designed to alleviate this limitation including the coaxial coupler based DLA structure and the clamped DLA structure. These structures were recently fabricated and high power tested at the NRL X-band Magnicon facility. Results show the multipactor can be reduced by the TiN coating on the dielectric surface. Gradient of 15 MV/m has also been tested without dielectric breakdown in the test of the clamped DLA structure. Detailed results are reported, and future plans discussed.

43 PARTICLE ACCELERATORS↗

Observation of Wakefield Generation in Left-Handed Band of Metamaterial-Loaded Waveguide

We report on a design of a TM-mode based metamaterial-loaded waveguide. Network analyzer measurements demonstrated a left-handed propagation region for the TM11 mode at around 10 GHz. A beamline experiment was performed with the metamaterial-loaded waveguide. In this experiment, a 6 MeV electron beam passes through the waveguide and generates a wakefield, via the Cherenkov radiation mechanism. We detected a signal in the left-handed frequency band at 10 GHz. This is an indirect demonstration of reverse Cherenkov radiation as discussed in several papers. Cherenkov radiation in artificially constructed materials (metamaterials, MTM) can provide unusual, engineered features that can be advantageous for particle detector design.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strain heterogeneity and damage nucleation at grain boundaries during monotonic deformation in commercial purity titanium.

Heterogeneous strain was analyzed in polycrystalline, commercial-purity titanium using many experimental techniques that provide information about microstructure, dislocation arrangement, grain orientation, orientation gradients, surface topography, and local strain gradients. The recrystallized microstructure with 50-200 {micro}m grains was extensively characterized before and after deformation using 4-point bending to strains between 2% and 15%. Extremely heterogeneous deformation occurred along some grain boundaries, leading to orientation gradients exceeding 10{sup o} over 10-20 {micro}m. Patches of highly characterized micro-structure were modeled using crystal plasticity finite element (CPFE) analysis to simulate the deformation to evaluate the ability of the CPFE model to capture local deformation processes. Damage nucleation events were identified that are associated with twin interactions with grain boundaries. Progress toward identifying fracture initiation criteria based upon slip and twin interactions with grain boundaries is illustrated with related CPFE simulations of deformation in a TiAl alloy.

36 MATERIALS SCIENCE↗

Experimental and Theoretical Studies on the Elasticity of Molybdenum

Experiments have been conducted to measure compressional (VP) and shear wave (VS) velocities as well as unit-cell volumes (densities) of molybdenum to 12.0 GPa at room temperature using ultrasonic interferometry in conjunction with synchrotron x-radiation. Both VP and VS as well as the adiabatic bulk (KS) and shear (G) moduli exhibit monotonic increase with increasing pressure. A finite strain equation of state analysis of the directly measured velocities and densities yields KS0 = 260.7(5) GPa, G0 = 125.1(2) GPa, KS0' = 4.7(1), and G0' = 1.5(1) for the elastic bulk and shear moduli and their pressure derivatives at ambient conditions. Complimentary to the experimental data, VP and VS as well as the elastic bulk and shear moduli were also computed using density functional theory (DFT) at pressures comparable to the current experiment. Comparing with experimental results, the velocities and elastic moduli from DFT calculations exhibit close agreement with the current experimental data both in their values as well as in their pressure dependence.

43 PARTICLE ACCELERATORS↗

Thermoelasticity of e-FeSi to 8 GPa and 1273 K

The elastic properties of {Sigma}-FeSi were investigated at high temperature and pressure using a combination of ultrasonic interferometry and synchrotron radiation up to 8 GPa and 1273 K. The unit-cell volumes and sound velocity data were fit to third-order finite-strain equations with adiabatic temperature conversions to maintain a thermodynamically internally consistent data set. The adiabatic zero-pressure bulk and shear moduli and their first pressure and temperature derivatives were obtained from this fitting: K{sub S0} = 168.9(7) GPa, G{sub 0} = 116.5(3) GPa, K{sub S0}{prime} = 6.6(2), G{sub 0}{prime} = 2.9(1), ({delta}K{sub S0}/{delta}T){sub P} = -0.023(1) GPa/K, ({delta}G{sub 0}/{delta}T){sub P} = -0.030(1) GPa/K. This study presents the first complete thermodynamically consistent set of elastic moduli and their temperature and pressure derivatives.

36 MATERIALS SCIENCE↗

Update on the development of externally powered dielectric-loaded accelerating structures.

We report on recent progress in a program to develop an RF-driven Dielectric-Loaded Accelerating (DLA) structure, capable of supporting high gradient acceleration. Previous high power tests revealed that the earlier DLA structures suffered from multipactor and arcing at the dielectric joint. A few new DLA structures have been designed to alleviate this limitation including the coaxial coupler based DLA structure and the clamped DLA structure. These structures were recently fabricated and high power tested at the NRL X-band Magnicon facility. Results show the multipactor can be reduced by the TiN coating on the dielectric surface. Gradient of 15 MV/m has also been tested without dielectric breakdown in the test of the clamped DLA structure. Detailed results are reported, and future plans discussed.

36 MATERIALS SCIENCE↗

Modeling and prototyping of a flux concentrator for positron capture.

An adiabatic matching device (AMD) generates a tapered high-strength magnetic field to capture positrons emitted from a positron target to a downstream accelerating structure. The AMD is a key component of a positron source and represents a technical challenge. The International Linear Collider collaboration is proposing to employ a pulsed, normal-conducting, flux-concentrator to generate a 5 Tesla initial magnetic field. The flux-concentrator structure itself and the interactions between the flux-concentrator and the external power supply circuits give rise to a nontrivial system. In this paper, we present a recently developed equivalent circuit model for a flux concentrator, along with the characteristics of a prototype fabricated for validating the model. Using the model, we can obtain the transient response of the pulsed magnetic field and the field profile. Calculations based on the model and the results of measurements made on the prototype are in good agreement.

43 PARTICLE ACCELERATORS↗

InSbN alloys prepared by two-step ion implantation for infrared photodetection

InSbN alloys are fabricated by two-step nitrogen ion implantation into InSb (111) wafers. X-ray photoelectron spectroscopy indicates that most of the implanted nitrogen ions substitute Sb to form In-N bonds. The percentage of the In-N bonds is found to decrease with the increase in the implanted nitrogen. Such alloys can effectively detect long wavelength infrared radiation and the absorption peak energies can be controlled by monitoring the implanted nitrogen dose. The measured peak wavelengths are consistent with the band gaps of the alloys calculated using a ten-band k{center_dot}p model.

36 MATERIALS SCIENCE↗

Heavy quark production from jet conversions in a quark-gluon plasma

Recently, it has been demonstrated that the chemical composition of jets in heavy ion collisions is significantly altered compared to the jets in the vacuum. This signal can be used to probe the medium formed in nuclear collisions. In this study we investigate the possibility that fast light quarks and gluons can convert to heavy quarks when passing through a quark-gluon plasma. We study the rate of light to heavy jet conversions in a consistent Fokker-Planck framework and investigate their impact on the production of high-p{sub T} charm and bottom quarks at the Relativistic Heavy Ion Collider and the Large Hadron Collider.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Development of a dual layered dielectric-loaded accelerating structure.

Due to the high magnetic field-induced surface currents on its conducting sleeve, a conventional single layer Dielectric-Loaded Accelerating (DLA) structure exhibits a relatively high RF loss. One possible way to solve this problem is to use multilayered DLA structures. In these devices, the RF power attenuation is reduced by making use of the Bragg Fiber concept: the EM fields are well confined by multiple reflections from multiple dielectric layers. This paper presents the design of an X-band dual layer DLA structure as well as the results of bench tests of the device. We will also present results on the design, numerical modeling, and fabrication of structures for coupling RF into multilayer DLAs such as a novel TM{sub 03} mode launcher and a TM{sub 01}-TM{sub 03} mode converter using dielectric-loaded corrugated waveguide.

36 MATERIALS SCIENCE↗

Collimation Optimizations, Capture Efficiency, and Primary-Beam Power Loss in the ILC Positron Source

The ILC positron beam generated from a thin Ti target has a wide energy spread and large transverse divergence. With the collection optics immediately downstream of the target and pre-acceleration to 125 MeV, the collected positron beam still has a long tail of positrons with low energies and large transverse divergence, which will be lost in the rest of the ILC positron source beamline. A collimation system is proposed and optimized for the case of a shielded target with quarter-wave transformation collection optics so that the power loss in the magnets and RF structures is effectively controlled within the acceptable level and in the damping ring (DR) within 640 W, assuming 3 x 10{sup 10} of the captured positrons per bunch in the DR. In this case, the capture efficiency and DR injection efficiency are 13% and 99.8%, respectively. The lower capture efficiency is expected to result in higher injection efficiency and therefore, a lower power loss in the DR. The capture efficiency for the cases of a shielded target with flux concentrator and 5-T immersed target with flux concentrator is 20% and 30%, respectively, with the collimation system.

43 PARTICLE ACCELERATORS↗