Search NASA⌕ Search

Engineering topics

Liu, Xiaolei

Publications and source records attributed to Liu, Xiaolei.

The effect of remnant CdSe layers on the performance of CdSeTe/CdTe photovoltaic devices

Thin film CdTe-based photovoltaic devices have achieved high efficiency above 22 %. The recent improvement in efficiency is due to Se alloying in the CdTe absorbers to form a CdSeTe/CdTe structure. The subsequent band gap grading increases the short circuit current density. The Se can be introduced by depositing a precursor thin film of either CdSe or a CdSeTe alloy and then diffusing the Se into the CdTe during the high temperature cadmium chloride activation process. Using CdSe is preferred because it is easier to control the Se concentration. However, during fabrication of the CdSeTe/CdTe devices, the CdSe thickness needs to be precisely controlled to prevent the retention of a CdSe remnant layer after the activation treatment. Retention of a remnant CdSe layer causes a dramatic reduction in device efficiency. In this work, we show that the reduction in efficiency is caused by a number of factors. The remnant CdSe layer is n-type which moves the position of the p-n junction. Also, it is widely thought that the CdSe remnants are photo-inactive. In this work, we clarify that the individual CdSe grains are actually highly photo-active. However, the grain sizes in the CdSe remnant and the adjacent CdSeTe layer are very small resulting in a high grain boundary area. Although the grain boundaries are passivated with chlorine, cathodoluminescence imaging and electrical measurements show that this is only partially effective. Also, EQE measurements show that the remnant CdSe causes parasitic absorption. Overall, the remnant CdSe layer causes a reduction in short circuit current density and device efficiency. The thickness of the CdSe precursor layer and the cadmium chloride activation process conditions must be precisely optimised to ensure that all the CdSe is consumed and inter-diffused to form the CdSeTe alloy for highest efficiency devices.

CdSe remnant↗

SnO2 Buffer Layers for High Efficiency CdSeTe/CdTe Devices

SnO2 buffer layers of different thickness were deposited onto TEC 15 Fluorine doped tin oxide coated glass substrates using rf magnetron sputtering. The buffer layers were then incorporated into Cu-doped CdSeTe/CdTe devices using a range of CdCl 2 activation treatments and CuCl2 annealing temperatures to determine the effects of buffer layer thickness on device performance. Results show that all devices fabricated with thinner buffer layers resulted in much better J - V characteristics than their thicker counterparts. This was mainly due to a reduced open-circuit voltage (Voc) when using thicker buffer layers. The best device produced a conversion efficiency of 16.59%, fill factor of 71.62%, Jsc of 28.44 mA/cm 2 and Voc of 814.23 mV.

buffer layers↗

Synthesis of Synergistic Nitrogen-Doped NiMoO 4 /Ni 3 N Heterostructure for Implementation of an Efficient Alkaline Electrocatalytic Hydrogen Evolution Reaction

Electrochemical water splitting is considered as an effective and promising method to produce the ideal hydrogen energy to solve the energy crisis and environmental pollution problems. In this paper, we successfully synthesized the N-doped NiMoO 4 /Ni 3 N heterostructure, which exhibited an efficient HER performance with a lower overpotential of 51 mV at 10 mA cm -2 and a lower Tafel slope value of 45.47 mV dec -1 compared with those of NiMoO 4 , N-doped NiMoO 4 , or Ni 3 N owing to the synergistic effect of N doping and construction of the superior heterostructure. When the N-doped NiMoO 4 /Ni 3 N heterostructure is used as a cathode and the well-recognized excellent OER material (NiFe-LDH) is used as an anode to construct the two-electrode electrolyzer, the system requires only 1.506 and 1.559 V to achieve the current densities of 10 and 20 mA cm -2 , respectively, which are lower than those of the commercial Pt/C//RuO 2 system (1.573 and 1.634 V, respectively) or many other reported systems. At the same time, this two-electrode system demonstrates excellent durability in electrocatalytic water splitting. This design method paved the way for the development of another electrocatalytic system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient photocatalytic H2 production via rational design of synergistic spatially-separated dual cocatalysts modified Mn0.5Cd0.5S photocatalyst under visible light irradiation

Noble metal-free highly efficient cocatalysts are very important for cost efficient hydrogen fuel production. While most studies concentrate on single cocatalyst photocatalytic systems. Here, we report on the synthesis of Mn0.5Cd0.5S photocatalyst hetero-architecture with synergistic spatially separated dual cocatalysts Cu2-xS and MoS2 for highly efficient photocatalytic H-2 production. Through tactfully utilizing Cu2-xS/Mn0.5Cd0.5S nanoscale p-n junction to promote efficient transfer of photo-generated holes to Cu2-xS and MoS2 can be located exactly on the different positions where the photo-generated electrons must go through by photo-reduction of (NH4)(2)MoS4. Cu2-xS can be an oxidation active site to assemble photo-generated holes and MoS2 can capture and transport the photon-generated electrons. Therefore the photo-induced carriers can be efficiently separated and transferred to take part in photocatalytic reactions. The prepared Cu2-xS (0.015)/Mn0.5Cd0.5S/MoS2 (3 wt %) photocatalyst shows the highest H-2 production rate of 687.62 mu mol/h, which exceeds the rate of Mn0.5Cd0.5S and Mn0.5Cd0.5S loaded with Cu2-xS or MoS2 alone by 22, 1.7 and 3.48 times, respectively. This work provides a new thought to design efficient spatially separated and synergistic dual cocatalysts modified photocatalysts for H-2 production.

Dual cocatalysts↗

Effects of citrate on hexavalent chromium reduction by structural Fe(II) in nontronite

Iron-bearing clay minerals and organic matter are two important components in natural environments that influence hexavalent chromium (Cr(VI)) reduction. Previous studies have shown that organic ligands could influence Cr(VI) reduction by aqueous Fe2+ and pyrite. However, the effects of organic ligands on Cr(VI) reduction by structural Fe(II) in clays are not well understood. In this study, the effects of citrate on Cr(VI) reduction by nontronite (NAu-2) were investigated under near neutral pH condition (pH=6). Our results showed that the presence of citrate decreased the rate but increased the amount of Cr(VI) reduction by structural Fe(II) in NAu-2. The decreased reaction rate was likely due to competitive sorption of citrate and polyanionic dichromate (Cr2O7- ), because sorption of dichromate appeared to be the first step for subsequent Cr(VI) reduction. The increased amount of Cr(VI) reduction in the presence of citrate was likely because citrate provided additional reducing power through ligand-metal electron transfer in the presence of soluble Fe 3+ derived from dissolution of reduced NAu-2. Soluble Cr(III)-citrate complex was the possible form of reduced chromium when citrate was present. In contrast, nanometer-sized Cr2O3 particles were the product of Cr(VI) reduction by reduced NAu-2 without citrate. Our study highlights the importance of organic ligands on Cr(VI) reduction and immobilization when iron-bearing clay minerals are applied to treat Cr(VI) contaminant in organic matter rich environments.

Environmental Molecular Sciences Laboratory↗

Rapid thermal annealed Molybdenum back contact for Cu{sub 2}ZnSnS{sub 4} thin film solar cells

In this work, an industrially viable manufacturing process—rapid thermal annealing (RTA) of Molybdenum back contact is proposed and investigated to improve the performance of sputtered Cu{sub 2}ZnSnS{sub 4} (CZTS) solar cells. The RTA process was found to facilitate Na diffusion from soda lime glass to Mo as well as CZTS and improve the crystallinity of the Mo film. Consequently, the surface morphology of the subsequently deposited CZTS absorbers is improved, which results in significant enhancement of open circuit voltage, short-circuit current density, fill factor, and conversion efficiency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗