Search NASA⌕ Search

Engineering topics

Liu, Y. J.

Publications and source records attributed to Liu, Y. J..

Experimental and theoretical study of weakly coherent mode in I-mode edge plasmas in the EAST tokamak

The I-mode is a promising operation mode for fusion in the future, featuring high-temperature and low-density confinement, but the reason why the temperature and density are decoupled remains an important aspect to be explored. The experimental results from the experimental advanced superconducting tokamak (EAST) showed that the weakly coherent mode (WCM) is directly related to sustaining the I-mode and that the peak amplitude of the WCM is proportional to the temperature in the pedestal. Here, simulating the experimental data from EAST with the six-field model of BOUT++, we find a density perturbation close to the frequency of the WCM observed in the experiment. By testing all the physical terms in this model, we find that the density perturbation and particle transport are directly related to the drift Alfvén wave (DAW) mode. Additionally we use the SymPIC program (Xiao et al Plasma Sci. Technol. 20 110501; Phys. Plasmas 22 112504; Plasma Sci. Technol. 23 055102) to simulate the same experimental data and find that the frequency range of the WCM is close to both experimental and BOUT++ results. Therefore, the WCM of the I-mode can be considered to be driven by the DAW, which helps improve the transport of the I-mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of Ag Doping and Point Defect on the Magnetism of ZnO

The magnetism sources and magnetic mechanism of Ag doping and point defect, which coexist in the presence of ZnO, are frequently controversial. To solve these problems, the effects of Ag doping and Zn or O vacancy on the magnetism of ZnO were investigated using geometry optimization and energy calculation according to the first-principles generalized gradient approximation + U (GGA+U) method of density functional theory. Results revealed that the system which Ag doping and Zn vacancy coexists in ZnO could achieve room-temperature ferromagnetism. This system had an extremely high spin polarization, which was advantageous for the spin electron injection sources applied in dilute magnetic semiconductors. Result also revealed that the magnetism of Zn{sub 14}AgO{sub 16} was caused by the electron hybrid coupling effects among the O-2p, Ag-4d, Ag-5s, and Zn-4s orbits. And these effects were produced by the hole carriers after complexes were formed by the Ag doping and Zn vacancy. With regard to the most stable structure of the ground state, all doping systems which Ag replacing Zn and O vacancy coexisted in ZnO and those which Ag replacing Zn, interstitial Ag, and O vacancy coexisted in ZnO were all non-magnetic. Thus, these doping systems were unsuitable for dilute magnetic semiconductors. By contrast, the doping systems of interstitial Ag and Zn vacancy were magnetic, although the magnetism was relatively weak, thus rendering such systems inapplicable as well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Co Doping and Point Defect on the Ferromagnetism of ZnO

The effects of different doping proportions of Co doping and oxygen vacancies (V{sub O}) on the ferromagnetism of zinc oxide (ZnO) are controversial. To solve this problem, we investigated the effects of Co doping and point defects (V{sub O}, V{sub Zn}, H{sub i}, and Zn{sub i}) on the ferromagnetism of ZnO through first-principle calculations by using generalized gradient approximation + U (GGA + U) under density functional theory. Results show that the closer the distance between Co and vacancies (V{sub O} or V{sub Zn}), the lower the formation energy and the more stable the system will be. Co-doped ZnO with V{sub O} or V{sub Zn} exhibits long-range ordered ferromagnetism and Curie temperature above the room temperature. Especially, Co-doped ZnO with V{sub Zn} shows a half-metallic behavior, resulting in 100% conduction hole polarizability, which is highly beneficial for dilute magnetic semiconductors (DMSs) as a hole injection source. The ferromagnetism of Zn{sub 14}CoO{sub 16} is caused by the double exchange effects among the electrons of the O–2p, Co–3d, and Zn–3d orbits mediated by the hole carriers after complexes were formed by the Co doping and Zn vacancy. Similarly, the origin of ferromagnetism in Zn{sub 15}CoO{sub 15} is derived from the double exchange effects among the electrons of O–2p, Co–3d, and Zn–4s states mediated by the electron carriers after complexes were formed by the Co doping and O vacancy. In addition, the result shows that Co-doped ZnO with interstitial H (H{sub i}) or Zn (Zn{sub i}) is unfavorable for ferromagnetism and should be avoided experimentally.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Stress Ratio and Microstructure on Fatigue Failure Behavior of Polycrystalline Nickel Superalloy

The effects of microstructure and stress ratio on high cycle fatigue of nickel superalloy Nimonic 80A were investigated. The stress ratios of 0.1, 0.5 and 0.8 were chosen to perform fatigue tests in a frequency of 110 Hz. Cleavage failure was observed, and three competing failure crack initiation modes were discovered by a scanning electron microscope, which were classified as surface without facets, surface with facets and subsurface with facets. With increasing the stress ratio from 0.1 to 0.8, the occurrence probability of surface and subsurface with facets also increased and reached the maximum value at R = 0.5, meanwhile the probability of surface initiation without facets decreased. The effect of microstructure on the fatigue fracture behavior at different stress ratios was also observed and discussed. Based on the Goodman diagram, it was concluded that the fatigue strength of 50% probability of failure at R = 0.1, 0.5 and 0.8 is lower than the modified Goodman line.

36 MATERIALS SCIENCE↗

Effects of solution volume on hydrogen production by pulsed spark discharge in ethanol solution

Hydrogen production from ethanol solution (ethanol/water) by pulsed spark discharge was optimized by varying the volume of ethanol solution (liquid volume). Hydrogen yield was initially increased and then decreased with the increase in solution volume, which achieved 1.5 l/min with a solution volume of 500 ml. The characteristics of pulsed spark discharge were studied in this work; the results showed that the intensity of peak current, the rate of current rise, and energy efficiency of hydrogen production can be changed by varying the volume of ethanol solution. Meanwhile, the mechanism analysis of hydrogen production was accomplished by monitoring the process of hydrogen production and the state of free radicals. The analysis showed that decreasing the retention time of gas production and properly increasing the volume of ethanol solution can enhance the hydrogen yield. Through this research, a high-yield and large-scale method of hydrogen production can be achieved, which is more suitable for industrial application.

08 HYDROGEN↗

Characterization of a real-time tracer for isoprene epoxydiols-derived secondary organic aerosol (IEPOX-SOA) from aerosol mass spectrometer measurements

Substantial amounts of secondary organic aerosol (SOA) can be formed from isoprene epoxydiols (IEPOX), which are oxidation products of isoprene mainly under low-NO conditions. Total IEPOX-SOA, which may include SOA formed from other parallel isoprene oxidation pathways, was quantified by applying positive matrix factorization (PMF) to aerosol mass spectrometer (AMS) measurements. The IEPOX-SOA fractions of organic aerosol (OA) in multiple field studies across several continents are summarized here and show consistent patterns with the concentration of gas-phase IEPOX simulated by the GEOS-Chem chemical transport model. During the Southern Oxidant and Aerosol Study (SOAS), 78 % of PMF-resolved IEPOX-SOA is accounted by the measured IEPOX-SOA molecular tracers (2-methyltetrols, C5-Triols, and IEPOX-derived organosulfate and its dimers), making it the highest level of molecular identification of an ambient SOA component to our knowledge. An enhanced signal at C 5 H 6 O + (m/z 82) is found in PMF-resolved IEPOX-SOA spectra. To investigate the suitability of this ion as a tracer for IEPOX-SOA, we examine f C 5 H 6 O ( f C 5 H 6 O= C 5 H 6 O + /OA) across multiple field, chamber, and source data sets. A background of ~ 1.7 ± 0.1 ‰ (‰ = parts per thousand) is observed in studies strongly influenced by urban, biomass-burning, and other anthropogenic primary organic aerosol (POA). Higher background values of 3.1 ± 0.6 ‰ are found in studies strongly influenced by monoterpene emissions. The average laboratory monoterpene SOA value (5.5 ± 2.0 ‰) is 4 times lower than the average for IEPOX-SOA (22 ± 7 ‰), which leaves some room to separate both contributions to OA. Locations strongly influenced by isoprene emissions under low-NO levels had higher f C 5 H 6 O (~ 6.5 ± 2.2 ‰ on average) than other sites, consistent with the expected IEPOX-SOA formation in those studies.f C 5 H 6 O in IEPOX-SOA is always elevated (12–40 ‰) but varies substantially between locations, which is shown to reflect large variations in its detailed molecular composition. The low f C 5 H 6 O (< 3 ‰) reported in non-IEPOX-derived isoprene-SOA from chamber studies indicates that this tracer ion is specifically enhanced from IEPOX-SOA, and is not a tracer for all SOA from isoprene. We introduce a graphical diagnostic to study the presence and aging of IEPOX-SOA as a triangle plot of fCO2 vs. f C 5 H 6 O. Finally, we develop a simplified method to estimate ambient IEPOX-SOA mass concentrations, which is shown to perform well compared to the full PMF method. The uncertainty of the tracer method is up to a factor of ~ 2, if the f C 5 H 6 O of the local IEPOX-SOA is not available. When only unit mass-resolution data are available, as with the aerosol chemical speciation monitor (ACSM), all methods may perform less well because of increased interferences from other ions at m/z 82. This study clarifies the strengths and limitations of the different AMS methods for detection of IEPOX-SOA and will enable improved characterization of this OA component.

Hu, W. W.↗

The lithium abundances of a large sample of red giants

The lithium abundances for 378 G/K giants are derived with non-local thermodynamic equilibrium correction considered. Among these are 23 stars that host planetary systems. The lithium abundance is investigated, as a function of metallicity, effective temperature, and rotational velocity, as well as the impact of a giant planet on G/K giants. The results show that the lithium abundance is a function of metallicity and effective temperature. The lithium abundance has no correlation with rotational velocity at v sin i < 10 km s{sup –1}. Giants with planets present lower lithium abundance and slow rotational velocity (v sin i < 4 km s{sup –1}). Our sample includes three Li-rich G/K giants, 36 Li-normal stars, and 339 Li-depleted stars. The fraction of Li-rich stars in this sample agrees with the general rate of less than 1% in the literature, and the stars that show normal amounts of Li are supposed to possess the same abundance at the current interstellar medium. For the Li-depleted giants, Li-deficiency may have already taken place at the main sequence stage for many intermediate mass (1.5-5 M {sub ☉}) G/K giants. Finally, we present the lithium abundance and kinematic parameters for an enlarged sample of 565 giants using a compilation of the literature, and confirm that the lithium abundance is a function of metallicity and effective temperature. With the enlarged sample, we investigate the differences between the lithium abundance in thin-/thick-disk giants, which indicate that the lithium abundance in thick-disk giants is more depleted than that in thin-disk giants.

79 ASTRONOMY AND ASTROPHYSICS↗