Engineering topics

Liu, Yining

Publications and source records attributed to Liu, Yining.

3 records

DOE OSTI2024

Thiol-Functionalized Adsorbents through Atomic Layer Deposition and Vapor-Phase Silanization for Heavy Metal Ion Removal

The removal of toxic heavy metal ions from water resources is crucial for environmental protection and public health. In this study, we address this challenge by developing a surface functionalization technique for the selective adsorption of these contaminants. Our approach involves atomic layer deposition (ALD) followed by vapor-phase silanization of porous substrates. We utilized porous silica gel powder (similar to 100 mu m particles, 89 m 2 /g surface area, similar to 30 nm pores) as an initial substrate. This powder was first coated with similar to 0.5 nm ALD Al 2 O 3 , followed by vapor-phase grafting of a thiol-functional silane. The modified powder, particularly in acidic conditions (pH = 4), showed high selectivity in adsorbing Cd(II), As(V), Pb(II), Hg(II), and Cu(II) heavy metal ions in mixed ion solutions over common benign ions (e.g., Na, K, Ca, and Mg). Langmuir adsorption isotherms and breakthrough adsorption studies were conducted to assess heavy metal binding affinity and revealed the order of Cd(II) < Pb(II) < Cu(II) < As(V) < Hg(II), with a significantly higher affinity for As(V) and Hg(II) ions. Time-dependent uptake studies demonstrated rapid removal of heavy metal ions from aqueous environments, with Hg(II) exhibiting the fastest adsorption kinetics on thiol-modified surfaces. Finally, these findings highlight the potential of ALD and vapor-phase silanization to create effective adsorbents for the targeted removal of hazardous contaminants from water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Material Design Strategies for Recovery of Critical Resources from Water

Population growth, urbanization, and decarbonization efforts are collectively straining the supply of limited resources that are necessary to produce batteries, electronics, chemicals, fertilizers, and other important products. Securing the supply chains of these critical resources via the development of separation technologies for their recovery represents a major global challenge to ensure stability and security. Surface water, groundwater, and wastewater are emerging as potential new sources to bolster these supply chains. Recently, a variety of material-based technologies have been developed and employed for separations and resource recovery in water. Judicious selection and design of these materials to tune their properties for targeting specific solutes is central to realizing the potential of water as a source for critical resources. Here, the materials that are developed for membranes, sorbents, catalysts, electrodes, and interfacial solar steam generators that demonstrate promise for applications in critical resource recovery are reviewed. In addition, a critical perspective is offered on the grand challenges and key research directions that need to be addressed to improve their practical viability.

36 MATERIALS SCIENCE↗

DOE OSTI2022

A facile approach for site-selective and large-area growth of MoS 2 through heterogeneous nucleation

Heterogeneous nucleation could be an effective approach to producing an array of transition metal dichalco-genides (TMDs) at controlled locations on a substrate. In this study, we prepared Pt mesa structures on the substrate to induce heterogeneous nucleation of MoS 2 during chemical vapor deposition (CVD) and investigated the adsorption of nuclei using Monte Carlo (MC) simulations. The MC simulations suggest that the site-selectivity of MoS 2 dramatically drops when the CVD growth time goes beyond the critical time at which nuclei fully cover the Pt mesas, and such critical time can be delayed when the size of Pt mesas increases. Our experimental observations on a clean array of MoS 2 successfully synthesized on 10 um-width square Pt mesas but not on 4 um -width square Pt mesas support the MC simulation. We further designed a simple method employing dummy substrates to increase the yield of the site-selective MoS 2 array. Computational fluid dynamics (CFD) simulation reveals that such dummy substrates restrict the precursor concentration and provide a confined channel for the precursors to react slowly, which benefits producing large-area and site-selective MoS 2 . Furthermore, compared with conventional CVD, the total coverage of site-selective MoS 2 has enlarged by seven times using dummy substrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗