Search NASA⌕ Search

Engineering topics

Liu, Yongchang

Publications and source records attributed to Liu, Yongchang.

Annealing in Argon Universally Upgrades the Na‐Storage Performance of Mn‐Based Layered Oxide Cathodes by Creating Bulk Oxygen Vacancies

Abstract Manganese‐rich layered oxide cathodes of sodium‐ion batteries (SIBs) are extremely promising for large‐scale energy storage owing to their high capacities and cost effectiveness, while the Jahn–Teller (J–T) distortion and low operating potential of Mn redox largely hinder their practical applications. Herein, we reveal that annealing in argon rather than conventional air is a universal strategy to comprehensively upgrade the Na‐storage performance of Mn‐based oxide cathodes. Bulk oxygen vacancies are introduced via this method, leading to reduced Mn valence, lowered Mn 3 d‐ orbital energy level, and formation of the new‐concept Mn domains. As a result, the energy density of the model P2‐Na 0.75 Mg 0.25 Mn 0.75 O 2 cathode increases by ≈50 % benefiting from the improved specific capacity and operating potential of Mn redox. The Mn domains can disrupt the cooperative J–T distortion, greatly promoting the cycling stability. This exciting finding opens a new avenue towards high‐performance Mn‐based oxide cathodes for SIBs.

Chemistry↗

A Novel NASICON‐Type Na 4 MnCr(PO 4 ) 3 Demonstrating the Energy Density Record of Phosphate Cathodes for Sodium‐Ion Batteries

Abstract Sodium‐ion batteries (SIBs) have attracted incremental attention as a promising candidate for grid‐scale energy‐storage applications. To meet practical requirements, searching for new cathode materials with high energy density is of great importance. Herein, a novel Na superionic conductor (NASICON)‐type Na 4 MnCr(PO 4 ) 3 is developed as a high‐energy cathode for SIBs. The Na 4 MnCr(PO 4 ) 3 nanoparticles homogeneously embedded in a carbon matrix can present an extraordinary reversible capacity of 160.5 mA h g −1 with three‐electron reaction at ≈3.53 V during the Na + extraction/insertion process, realizing an unprecedentedly high energy density of 566.5 Wh kg −1 in the phosphate cathodes for SIBs. It is intriguing to reveal the underlying mechanism of the unique Mn 2+ /Mn 3+ , Mn 3+ /Mn 4+ , and Cr 3+ /Cr 4+ redox couples via X‐ray absorption near‐edge structure spectroscopy. The whole electrochemical reaction undergoes highly reversible single‐phase and biphasic transitions with a moderate volume change of 7.7% through in situ X‐ray diffraction and ex situ high‐energy synchrotron X‐ray diffraction. Combining density functional theory (DFT) calculations with the galvanostatic intermittent titration technique, the superior performance is ascribed to the low ionic‐migration energy barrier and desirable Na‐ion diffusion kinetics. The present work can offer a new insight into the design of multielectron‐reaction cathode materials for SIBs.

Zhang, Jian↗

Flow Characteristics of a Medium–High Carbon Mn-Si-Cr Alloyed Steel at High Temperatures

This study investigates the deformation behavior of a medium–high carbon Mn-Si-Cr alloyed steel using hot compression tests. The tests were performed on a Gleeble 1500D thermomechanical simulator with a temperature range of 950–1150 °C and a strain rate range of 0.005–5 s{sup −1}. The processing parameters (i.e., temperature T, strain rate ε-dot , and strain ε) influenced the flow softening behavior of the material. The dynamic recrystallization occurred during hot deformation. Correlations between the Zener–Hollomon parameter and the size and the volume fraction of new recrystallized grains were developed. These findings are described using mathematical models. The strain-compensated Arrhenius-type constitutive model and the multiple-linear model were developed based on the true stress–strain curves we obtained. A comparative study was performed in order to measure the validity of the two models in representing hot deformation behavior. Both models were shown to accurately predict flow stress across a range of conditions, reflecting the characteristics of true stress–strain curves by exhibiting work hardening, dynamic recovery, and dynamic recrystallization. The empirical multiple-linear mathematical model was shown to be more efficient and accurate when calculating the hot deformation behavior of steel at elevated temperatures.

36 MATERIALS SCIENCE↗

Precipitation of Carbides and Dissolution of Widmanstätten Structure for Enhanced Hardness in Ti{sub 2}AlNb-Based Alloys

Carbide-reinforced Ti{sub 2}AlNb matrix composites were spark plasma sintered at 1100 °C by incorporating CNTs into single-B2-phase Ti-22Al-25Nb powders. The as-SPSed alloys were solution treated and then aged in different phase regions. By kinetics analysis and energy-dispersive spectroscopy, it is found carbon will stabilize α{sub 2} phase during solution treatment, and the formation of carbide results in the Nb-depleted regions, which further induces the formation of curly B2 + O Widmanstätten structure during quenching. Different from the general Widmanstätten structure in the aged Ti{sub 2}AlNb alloy, the remained α{sub 2} will consume the B2 within the Widmanstätten structure, when the carbon-added alloy is aged in B2 + O phase region. Compared to the alloy without CNTs, the Vickers hardness of the aged carbon-added Ti{sub 2}AlNb alloy is increased significantly, which is related to the uniform and abundant columnar carbides within the O-phase matrix.

36 MATERIALS SCIENCE↗

Precipitation behavior of Widmanstätten O phase associated with interface in aged Ti2AlNb-based alloys

Highlights: • Ball milling tunes the morphology of primary O phase in Ti{sub 2}AlNb alloys. • The interface of Widmanstatten B2 and O affects the hardness of the alloys. • The entire precipitation process of Widmanstatten O phase is reported. - Abstract: Ti{sub 2}AlNb-based alloys, spark plasma sintered from ball-milled octahedral Ti-22Al-25Nb powder, are aged for 0–3 h in this study. Ball milling tunes the morphology of primary orthorhombic (O) phase to be columnar, and improves the mechanical properties of the alloys. The evolution of the Widmanstätten O phase, which brought main precipitation strengthening effect, is then investigated during the ageing process. The hardness of the alloys is improved by an increasing content of O phase and the reduced width of the Widmanstätten O phase; in addition, the length of Widmanstätten O phase also brings positive effect on the hardness, which indicates that the hardness is strongly coupled with the interface of the Widmanstätten O precipitates and B2 matrix. By means of transmission electron microscopy observation, the precipitation of O initials with an amorphous state, followed by a coherent interface between (110){sub B2} and (002){sub O}, which is destroyed to be semi-coherent and incoherent during the next ageing stage.

36 MATERIALS SCIENCE↗

Effects of Static Recrystallization and Precipitation on Mechanical Properties of 00Cr12 Ferritic Stainless Steel

The 00Cr12 ferritic stainless steel samples were isothermally held at different temperatures in the range of 700 °C to 1000 °C to investigate the effect of static recrystallization and precipitation on mechanical properties, such as microhardness, tensile strength, and yield strength. The results show that the formation of the fine recrystallized grain, as well as precipitation, coarsening, and dissolution of the second-phase particles, influences the mechanical properties remarkably. The fine recrystallized grain can provide a positive grain boundary-strengthening effect in the sample under a relatively high holding temperature. Coarsening and dissolution of M{sub 23}C{sub 6} result in partial depletion of precipitate hardening. In contrast, the size and number density of MX particles are almost constant, regardless of the holding temperature; therefore, it can provide a better precipitation-hardening effect.

36 MATERIALS SCIENCE↗

Overexpression of GhSARP1 encoding a E3 ligase from cotton reduce the tolerance to salt in transgenic Arabidopsis

Ubiquitination plays a very important role in the response to abiotic stresses of plant. To identify key regulators of salt stress, a gene GhSARP1(Salt-Associated Ring finger Protein)encoding C3H2C3-type E3 ligase, was cloned from cotton. Transcription level of GhSARP1 was high in leaf, flower and fiber of 24,27 and 27DPA (Days Post-Anthesis), but low in root and stem. Except PEG6000 treatment, the expression of GhSARP1 was down-regulated by NaCl, cold and ABA after being treated for 1 h. GhSARP1-GFP fusion protein located on the plasma membrane, which was dependent on trans-membrane motif. In vitro ubiquitination assay showed that GhSARP1 had E3 ligase activity. Heterogeneous overexpression of GhSARP1reduced salt tolerance of transgenic Arabidopsis in germination and post-germination stage. Our results suggested that the GhSARP1 might negatively regulate the response to salt stress mediated by the ubiquitination in cotton. - Highlights: • GhSARP1 expression was regulated by various abiotic stresses. • GhSARP1 have E3 ligase activity in vitro and locate on the plasma membrane. • Overexpression of GhSARP1 in Arabidopsis reduced the salt tolerance.

60 APPLIED LIFE SCIENCES↗