Search NASA⌕ Search

Engineering topics

Liu, Yuzi

Publications and source records attributed to Liu, Yuzi.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Synchrotron X-ray-induced Synthesis of Copper Hydroxide Nitrate Nanoplates on Cu Thin Films in an Ambient Atmosphere

Synchrotron X-rays are widely used for material characterizations. However, they can also ionize atoms and molecules to damage and manipulate probed materials. We report here an X-ray-induced growth of copper hydroxide nitrate, Cu 2 (OH) 3 NO 3 , on copper thin films in the ambient atmosphere without solvents and thermal treatment. In situ synchrotron X-ray diffraction measurements showed that the time-dependent growth process of the Cu 2 (OH) 3 NO 3 is accompanied by the consumption of Cu metal and can be described by a sigmoidal model. The growth rate was reduced after the initial fast growth period. Scanning electron microscopy (SEM) images show that the isolated islands of Cu 2 (OH) 3 NO 3 nanoplates formed in the beginning, which grew together with new nanoplates formed under continued X-ray irradiation. The result demonstrated that high-flux synchrotron X-rays may provide an unconventional approach to synthesizing and manipulating materials, which will inspire future investigation both experimentally and theoretically.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electrochemically induced amorphous-to-rock-salt phase transformation in niobium oxide electrode for Li-ion batteries

Intercalation-type metal oxides are promising negative electrode materials for safe rechargeable lithium-ion batteries due to the reduced risk of Li plating at low voltages. Nevertheless, their lower energy and power density along with cycling instability remain bottlenecks for their implementation, especially for fast-charging applications. Here, we report a nanostructured rock-salt Nb 2 O 5 electrode formed through an amorphous-to-crystalline transformation during repeated electrochemical cycling with Li + . This electrode can reversibly cycle three lithiums per Nb 2 O 5 , corresponding to a capacity of 269 mAh g –1 at 20 mA g –1 , and retains a capacity of 191 mAh g –1 at a high rate of 1 A g –1 . Further, it exhibits superb cycling stability with a capacity of 225 mAh g –1 at 200 mA g –1 for 400 cycles, and a Coulombic efficiency of 99.93%. We attribute the enhanced performance to the cubic rock-salt framework, which promotes low-energy migration paths. Our work suggests that inducing crystallization of amorphous nanomaterials through electrochemical cycling is a promising avenue for creating unconventional high-performance metal oxide electrode materials.

25 ENERGY STORAGE↗
DOE OSTI2022

Self-healing Growth of LaNiO 3 on a Mixed-Terminated Perovskite Surface

Developing atomic-scale synthesis control is a prerequisite for understanding and engineering the exotic physics inherent to transition-metal oxide heterostructures. Thus, far, however, the number of materials systems explored has been extremely limited, particularly with regard to the crystalline substrate, which is routinely SrTiO 3 . Here, we investigate the growth of a rare-earth nickelate-LaNiO 3 -on (LaAlO 3 )(Sr 2 AlTaO 6 ) (LSAT) (001) by oxide molecular beam epitaxy (MBE). Whereas the LSAT substrates are smooth, they do not exhibit the single surface termination usually assumed necessary for control over the interface structure. Performing both nonresonant and resonant anomalous in situ synchrotron surface X-ray scattering during MBE growth, we show that reproducible heterostructures can be achieved regardless of both the mixed surface termination and the layer-by-layer deposition sequence. The rearrangement of the layers occurs dynamically during growth, resulting in the fabrication of high-quality LaNiO 3 /LSAT heterostructures with a sharp and consistent interfacial structure. This is due to the thermodynamics of the deposition window as well as the nature of the chemical species at interfaces-here, the flexible charge state of nickel at the oxide surface. This has important implications regarding the use of a wider variety of substrates for fundamental studies on complex oxide synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High-Energy and Stable Subfreezing Aqueous Zn–MnO 2 Batteries with Selective and Pseudocapacitive Zn-Ion Insertion in MnO 2

One major challenge of aqueous Zn–MnO 2 batteries for practical applications is their unacceptable performance below freezing temperatures. Here, in this study, the use of simple Zn(ClO 4 ) 2 aqueous electrolytes is described for all-weather Zn–MnO 2 batteries even down to -60 °C. The symmetric, bulky ClO 4 - anion effectively disrupts hydrogen bonds between water molecules and provides intrinsic ion diffusion even while frozen, and enables ≈260 mAh g -1 on MnO 2 cathodes at -30 °C . It is identified that subfreezing cycling shifts the reaction mechanism on the MnO 2 cathode from unstable H+ insertion to predominantly pseudocapacitive Zn 2+ insertion, which converts MnO 2 nanofibers into complicated zincated MnO x that are largely disordered and appeared as crumpled paper sheets. The Zn 2+ insertion at -30 °C is faster and much more stable than at 20 °C, and delivers ≈80% capacity retention for 1000 cycles without Mn 2+ additives. In addition, simple Zn(ClO 4 ) 2 electrolyte also enables a nearly fully reversible and dendrite-free Zn anode at -30 °C with ≈98% Coulombic efficiency. Zn–MnO 2 prototypes with an experimentally verified unit energy density of 148 Wh kg -1 at a negative-to-positive ratio of 1.5 and an electrolyte-to-capacity ratio of 2.0 are further demonstrated.

25 ENERGY STORAGE↗
DOE OSTI2022

Understanding fluorine-free electrolytes via small-angle X-ray scattering

Fluorine-free electrolytes have attracted great attention because of its low-cost and environmental friendliness. However, so far, little is known about the solution structures of these electrolytes. Here, we compare the solvation phenomenon of sodium tetraphenylborate (NaBPh 4 ) salt dissolved in organic solvents of propylene carbonate (PC), 1,2-dimethoxyethane (DME), acetonitrile (ACN) and tetrahydrofuran (THF). Small-angle X-ray scattering (SAXS) reveals a unique two-peak structural feature in this salt concentrated PC electrolyte, while solutions using other solvents only have one scattering peak. Molecular dynamics (MD) simulations further reveal that there are anion-based clusters in addition to the short-range charge ordering in the concentrated NaBPh4/PC electrolyte. Raman spectroscopy confirms the existence of considerable contact ion pairs (CIPs). Here, this work emphasizes the importance of global and local structural analysis, which will provide valuable clues for understanding the structure performance relationship of electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2022

Thermal dynamics of P2-Na 0.67 Ni 0.33 Mn 0.67 O 2 cathode materials for sodium ion batteries studied by in situ analysis

Cobalt-free layered Na 0.67 Ni 0.33 Mn 0.67 O 2 is an attractive cathode material for sodium ion batteries. The thermal stability of cathode materials is crucial to their practical applications. In the current work, we investigate structural and morphological evolution in P2-type Na 0.67 Ni 0.33 Mn 0.67 O 2 cathode materials during annealing via in situ synchrotron X-ray diffraction and transmission electron microscopy. Insights are obtained from the two complementary in situ characterizations (at different length scales) in term of the thermal stability of P2-Na 0.67 Ni 0.33 Mn 0.67 O 2 cathode materials. Here, the results indicate that the hexagonal P2 phase remains unchanged during the heat treatment process, and thermally driven expansion/contraction of lattice parameters exhibit an anisotropic character in the a and c directions. In addition, interfaces/grain boundaries play an important role in the structural stability, which leads to the distinct morphological evolution between the polycrystalline and single-crystal particles.

25 ENERGY STORAGE↗
DOE OSTI2022

High-performance LiNi 0.8 Mn 0.1 Co 0.1 O 2 cathode by nanoscale lithium sulfide coating via atomic layer deposition

The commercialization of nickel-rich LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) has been hindered by its continuous loss of practical capacity and reduction in average working voltage. To address these issues, surface modification has been well-recognized as an effective strategy. Different from the coatings reported in literature to date, in this work, we for the first time report a sulfide coating, amorphous Li 2 S via atomic layer deposition (ALD). Here, our study revealed that the conformal nano-Li 2 S coating shows exceptional protection over the NMC811 cathodes, accounting for the dramatically boosted capacity retention from ~11.6% to ~71% and the evidently mitigated voltage reduction from 0.39 to 0.18 V after 500 charge–discharge cycles. In addition, the Li 2 S coating remarkably improved the rate capability of the NMC811 cathode. Our investigation further revealed that all these beneficial effects of the ALD-deposited nano-Li 2 S coating lie in the following aspects: (i) maintain the mechanical integrity of the NMC811 electrode; (ii) stabilize the NMC electrode/electrolyte interface; and (iii) suppress the irreversible phase transition of NMC structure. Particularly, this study also has revealed that the nano-Li 2 S coating has played some unique role not associated with traditional non-sulfide coatings such as oxides. In this regard, we disclosed that the Li 2 S layer has reacted with the released O 2 from the NMC lattices, and thereby has dramatically mitigated electrolyte oxidation and electrode corrosion. Thus, this study is significant and has demonstrated that sulfides may be an important class of coating materials to tackle the issues of NMCs and other layered cathodes in lithium batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Engineering metal-oxide interface by depositing ZrO 2 overcoating on Ni/Al 2 O 3 for dry reforming of methane

Zirconium oxide (ZrO 2 ) was deposited onto Ni/Al 2 O 3 catalyst as overcoating by atomic layer deposition (ALD) for dry reforming of methane (DRM). High-temperature heating during H-2-reduction could transform the ALD-prepared ZrO 2 thin film to tetragonal phase and crack the encapsulating layer on Ni sites, which constructed a beneficial Ni-ZrO x interface. Here, interfacial surface oxygen vacancies on ZrO 2 overcoating were induced by the partial reduction of ZrO 2 surface during high-temperature H 2 reduction, with the assistance of Ni. During DRM, the interfacial oxygen vacancies enhanced CO 2 activation by dissociating CO 2 and releasing active O, thereby limiting carbon formation. For DRM at 700 °C and 800 °C, Ni/Al 2 O 3 with 5 cycles of ZrO 2 ALD overcoating enhanced both activity and stability significantly. For a 100-h DRM test at 600 °C, no deactivation was observed for the Ni/Al 2 O 3 catalyst with 10 cycles of ZrO 2 ALD overcoating, as compared to 59% relative activity loss of Ni/Al 2 O 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Synthesis and Characterization of Mesoporous Silica Nanoparticles Loaded with Pt Catalysts

Coating the catalyst with a nanoporous layer has been demonstrated to be an effective approach to improve catalyst stability. Herein, we systematically investigate two types of core-shell mesoporous silica nanoparticles with a platinum nanocatalyst using a variety of characterization methods. One of the mesoporous particles has a unique amine ring structure in the middle of a shell (Ring-mSiO 2 /Pt-5.0/SiO 2 ), and the other one has no ring structure (mSiO 2 /Pt-5.0/SiO 2 ). Brunauer–Emmett–Teller/Barrett–Joyner–Halenda (BET/BJH) presented a similar surface area for both particles, and the pore size was 2.4 nm. Ultra-Small-Angle X-ray Scattering (USAXS)/ Small-Angle X-ray Scattering (SAXS) showed the size of mSiO 2 /Pt-5.0/SiO 2 and Ring-mSiO 2 /Pt-5.0/SiO 2 were 420 nm and 272 nm, respectively. It also showed that the ring structure was 30 nm above the silica core. Using high-resolution Transmission Electron Microscopy (TEM), it was found that the platinum nanoparticles are loaded evenly on the surface of the silica. In situ SAXS heating experiments and Thermogravimetric Analysis (TGA) indicated that the mSiO 2 /Pt-5.0/SiO 2 were more stable during the high temperature, while the Ring-mSiO 2 /Pt-5.0/SiO 2 had more change in the particle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Approaching theoretical specific capacity of iron-rich lithium iron silicate using graphene-incorporation and fluorine-doping

Lithium iron silicate, Li 2 FeSiO 4 , is a promising cathode material for lithium ion batteries due to its high theoretical specific capacity, earth abundance, low cost, and environmental friendliness. The challenges of Li 2 FeSiO 4 as a practical cathode material are (1) the low electronic and ionic conductivity and (2) the low discharge voltage. The approach of incorporating graphene sheets into the nanostructure of Li 2 FeSiO 4 is used for dealing with the low conductivities while fluorine doping is intended to increase the discharge voltage. The fluorine-doped and graphene-incorporated iron-rich lithium iron silicate F-LFSO/G nanomaterials were successfully synthesized using a facile/efficient hydrothermal method with excellent performance, 328.43 mA h g -1 at 0.1C rate, approaching their theoretical specific capacity, 99% of 331 mA h g -1 . This clearly reveals that the reversible (de)lithiation of 2 Li + ions per F-LFSO has been realized as a result of these approaches. The (de)lithiation process has been studied using in operando high energy synchrotron X-ray absorption near edge spectroscopy and X-ray photoelectron spectroscopy aided by theoretical modeling, which reveals that F doping deeply changes the O electron configuration in F-LFSO, and consequently makes the Li + ion transfer easier, while the reversible redox of oxygen can be utilized to achieve high specific capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Synthetic Ligand Selection Affects Stoichiometry, Carrier Dynamics, and Trapping in CuInSe 2 Nanocrystals

CuInSe 2 nanocrystals exhibit tunable near-infrared bandgaps that bolster utility in photovoltaic applications as well as offer potential as substitutes for more-toxic Cd- and Pb-based semiconductor compositions. However, they can present a variety of defect states as well as unusual photophysics. In this work, we examine the effects of ligand composition (oleylamine, diphenylphosphine, and tributylphosphine) on carrier dynamics in these materials. Via spectroscopic measurements such as photoluminescence and transient absorption, we find that ligands present during the synthesis of CuInSe 2 nanocrystals impart non-radiative electronic states which compete with radiative recombination and give rise to low photoluminescence quantum yields. We characterize the nature of these defect states (hole vs. electron traps) and investigate whether they exist at the surface or interior of the nanocrystals. Carrier lifetimes are highly dependent on ligand identity where oleylamine-capped nanocrystals exhibit rapid trapping (< 20 ps) followed by diphenylphosphine (< 500 ps) and finally tributylphosphine (> 2 ns). A majority of carrier population localizes at indium copper antisites (electrons), copper vacancies (holes), or surface traps (electrons and/or holes), all of which are non-emissive.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Multiscale Understanding of Surface Structural Effects on High-Temperature Operational Resiliency of Layered Oxide Cathodes

The worldwide energy demand in electric vehicles and the increasing global temperature have called for development of high-energy and long-life lithium-ion batteries (LIBs) with improved high temperature operational resiliency. However, current attention has been mostly focused on cycling aging at elevated temperature, leaving considerable gaps of knowledge in the failure mechanism and practical control of abusive calendar aging and thermal runaway that are highly related to the eventual operational lifetime and safety performance of LIBs. Herein, using a combination of various in situ synchrotron X-ray and electron microscopy techniques, we report a multiscale understanding of surface structure effects involved in regulating the high temperature operational tolerance of polycrystalline Ni-rich layered cathodes. Our results collectively show that an ultraconformal poly (3,4-ethylenedioxythiophene) coating can effectively prevent LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathode from undesired phase transformation and transition metal dissolution on the surface, atomic displacement and dislocations within primary particles, intergranular cracking along the grain boundaries within secondary particles, and intensive bulk oxygen release during high state-of-charge and high temperature aging. As a result, the present work highlights the essential role of surface structure controls in overcoming the multiscale degradation pathways of high-energy battery materials at extreme temperature.

25 ENERGY STORAGE↗
DOE OSTI2021

Microwave synthesis of single-phase nanoparticles made of multi-principal element alloys

In this work, metal nanoparticles of multi-principal element alloys (MPEA) with a single crystalline phase have been synthesized by flash heating/cooling of nanosized metals encapsulated in micelle vesicles dispersed in an oil phase (e.g., cyclohexane). Flash heating is realized by selective absorption of a microwave pulse in metals to rapidly heat metals into uniform melts. The oil phase barely absorbs microwave and maintains the low temperature, which can rapidly quench the high-temperature metal melts to enable the flash cooling process. The precursor ions of four metals, including Au, Pt, Pd, and Cu, can be simultaneously reduced by hydrazine in the aqueous solution encapsulated in the micelle vesicles. The resulting metals efficiently absorb microwave energy to locally reach a temperature high enough to melt themselves into a uniform mixture. The duration of microwave pulse is crucial to ensure the reduced metals mix uniformly, while the temperature of oil phase is still low to rapidly quench the metals and freeze the single-phase crystalline lattices in alloy nanoparticles. The microwave-enabled flash heating/cooling provides a new method to synthesize single-phase MPEA nanoparticles of many metal combinations when the appropriate water-in-oil micelle systems and the appropriate reduction reactions of metal precursors are available.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Synergistic Multisites Fe 2 Mo 6 S 8 Electrocatalysts for Ambient Nitrogen Conversion to Ammonia

Electrochemical hydrogenation of N 2 under ambient conditions is attractive for sustainable and distributable NH 3 production but is limited by the lack of selective electrocatalysts. In this work, we describe active site motifs based on the Chevrel phase chalcogenide Fe 2 Mo 6 S 8 that exhibit intrinsic activities for converting N 2 to NH 3 in aqueous electrolytes. Despite having a very low specific surface area of ~2 m 2 /g, this catalyst exhibited a Faradaic efficiency of 12.5% and an average rate of 70 μg h –1 mg cat –1 for NH 3 production at -0.20 V vs RHE. Such activities were attributed to the unique composition and structure of Fe 2 Mo 6 S 8 that provide synergistic multisites for activating and associating key reaction intermediates. Specifically, Fe/Mo sites assist adsorption and activation of N 2 , whereas S sites stabilize hydrogen intermediate H ad * for N 2 hydrogenation. Fe in Fe 2 Mo 6 S 8 enhances binding of S with H ad * and thus inhibits the competing hydrogen evolution reaction. The spatial geometry of Fe, Mo, and S sites in Fe 2 Mo 6 S 8 promotes conversion of N 2 –H ad * association intermediates, reaching a turnover frequency of ~0.23 s –1 for NH 3 production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electrolytes Polymerization‐Induced Cathode‐Electrolyte‐Interphase for High Voltage Lithium‐Ion Batteries

Abstract Lithium‐ion batteries (LIBs) based on LiNi x Co y Mn 1‐x‐y O 2 (NCM) cathode materials have been widely commercialized, because of their high energy density, favorable rate performance, and relatively low cost. However, with increased Ni content to further increase their energy density, their cycling stability deteriorates dramatically and thus fails to meet the commercial application requirements. The artificial cathode‐electrolyte‐interphase (CEI) is a promising approach to solve this problem. Here, a robust CEI is fabricated through in situ polymerization of ethylene carbonate induced by aluminum isopropoxide (AIP). By adding 1 wt.% AIP in a commercial electrolyte, the capacity retention of LiNi 0.8 Co 0.1 Mn 0.1 O 2 ||Li cell at 1 C rate has been significantly increased from 80.8% to 97.8% with a highly reversible capacity of 176 mA h g −1 after 200 cycles. AIP can be also used as an additive during the slurry‐making process, enabling a reversible capacity of 170 mA h g −1 for LiCoO 2 after 200 cycles even at a high charge cut‐off voltage of 4.6 V. It is confirmed that the in situ formed CEI layer can prevent the cathodes from cracking and reduce the irreversible phase transformation.

Yang, Jixiang↗
DOE OSTI2021

Carbon Free and Noble Metal Free Ni 2 Mo 6 S 8 Electrocatalyst for Selective Electrosynthesis of H 2 O 2

Electrocatalytic two-electron reduction of oxygen is a promising method for producing sustainable H 2 O 2 but lacks low-cost and selective electrocatalysts. Here, the Chevrel phase chalcogenide Ni 2 Mo 6 S 8 is presented as a novel active motif for reducing oxygen to H 2 O 2 in an aqueous electrolyte. Although it has a low surface area, the Ni 2 Mo 6 S 8 catalyst exhibits exceptional activity for H 2 O 2 synthesis with >90% H 2 O 2 molar selectivity across a wide potential range. Chemical titration verified successful generation of H 2 O 2 and confirmed rates as high as 90 mmol H 2 O 2 g cat –1 h –1 . The outstanding activities are attributed to the ligand and ensemble effects of Ni that promote H 2 O dissociation and proton-coupled reduction of O 2 to HOO*, and the spatial effect of the Chevrel phase structure that isolates Ni active sites to inhibit O—O cleavage. The synergy of these effects delivers fast and selective production of H 2 O 2 with high turn-over frequencies of ≈30 s –1 . Additionally, the Ni 2 Mo 6 S 8 catalyst has a stable crystal structure that is resistive for oxidation and delivers good catalyst stability for continuous H 2 O 2 production. The described Ni-Mo6S8 active motif can unlock new opportunities for designing Earth-abundant electrocatalysts to tune oxygen reduction for practical H 2 O 2 production.

36 MATERIALS SCIENCE↗