Search NASA⌕ Search

Engineering topics

Liu, Yuzi

Publications and source records attributed to Liu, Yuzi.

122 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Highly Reversible Sodiation/Desodiation from a Carbon-Sandwiched SnS2 Nanosheet Anode for Sodium Ion Batteries

The further improvement of sodium ion batteries requires the elucidation of the mechanisms pertaining to reversibility, which allows the novel design of the electrode structure. Her; through a hydrogel-embedding method, we are able to confine the growth of few-layer SnS 2 nanosheets between a nitrogen- and sulfur-doped carbon nanotube (NS-CNT) and amorphous carbon. The obtained carbon-sandwiched SnS 2 nanosheets demonstrate excellent sodium storage properties. In operando small-angle X-ray scattering combined with the ex situ X-ray absorption near edge spectra reveal that the redox reactions between SnS 2 /NS-CNT and the sodium ion are highly reversible. Furthermore, on the contrary, the nanostructure evolution is found to be irreversible, in which the SnS 2 nanosheets collapse, followed by the regeneration of SnS 2 nanoparticles. This work provides operando insights into the chemical environment evolution and structure change of SnS 2 -based anodes, elucidating its reversible reaction mechanism, and illustrates the significance of engineered carbon support in ensuring the electrode structure stability.

25 ENERGY STORAGE↗
DOE OSTI2020

Revealing Sintering Kinetics of MoS 2 -Supported Metal Nanocatalysts in Atmospheric Gas Environments via Operando Transmission Electron Microscopy

The decoration of two-dimensional (2D) substrates with nanoparticles (NPs) serve as heterostructures for various catalysis applications. Deep understanding of catalyst degradation mechanisms during service conditions is crucial to improve the catalyst durability. In this work, we studied the sintering behavior of Pt and bimetallic Au-core Pt-shell (Au@Pt core–shell) NPs on MoS 2 supports at high temperatures under vacuum, nitrogen (N 2 ), hydrogen (H 2 ), and air environments by in situ gas-cell transmission electron microscopy (TEM). The key observations are summarized as effect of environment: while particle migration and coalescence (PMC) was the main mechanism that led to Pt and Au@Pt NPs degradation under vacuum, N 2 , and H 2 environments, the degradation of MoS 2 substrate was prominent under exposure to air at high temperatures. Pt NPs were less stable in H 2 environment when compared with the Pt NPs under vacuum or N 2 , due to Pt–H interactions that weakened the adhesion of Pt on MoS 2 . Effect of NP composition: under H 2 , the stability of Au@Pt NPs was higher in comparison to Pt NPs. This is because H 2 promotes the alloying of Pt–Au, thus reducing the number of Pt at the surface (reducing H 2 interactions) and increasing Pt atoms in contact with MoS 2 . Effect of NP size: The alloying effect promoted by H 2 was more pronounced in small size Au@Pt NPs resulting in their higher sintering resistance in comparison to large size Au@Pt NPs and similar size Pt NPs. The present work provides key insights into the parameters affecting the catalyst degradation mechanisms on 2D supports.

2D materials↗
DOE OSTI2020

Variability and origins of grain boundary electric potential detected by electron holography and atom-probe tomography

A number of grain boundary phenomena in ionic materials, in particular, anomalous (either depressed or enhanced) charge transport, have been attributed to space charge effects. Developing effective strategies to manipulate transport behaviour requires deep knowledge of the origins of the interfacial charge, as well as its variability within a polycrystalline sample with millions of unique grain boundaries. Electron holography is a powerful technique uniquely suited for studying the electric potential profile at individual grain boundaries, whereas atom-probe tomography provides access to the chemical identify of essentially every atom at individual grain boundaries. Using these two techniques, we show in this paper that the space charge potential at grain boundaries in lightly doped, high-purity ceria can vary by almost an order of magnitude. We further find that trace impurities (<25 ppm), rather than inherent thermodynamic factors, may be the ultimate source of grain boundary charge. These insights suggest chemical tunability of grain boundary transport properties. A number of grain boundary phenomena in ionic materials, such as anomalous charge transport, have been attributed to space charge effects. Space charge potential at grain boundaries in lightly doped, high-purity ceria is now shown to vary by almost an order of magnitude.

36 MATERIALS SCIENCE↗
DOE OSTI2020

An All-Ceramic, Anisotropic, and Flexible Aerogel Insulation Material

To exploit the high-temperature superinsulation potential of anisotropic thermal management materials, the incorporation of ceramic aerogel into the aligned structural networks is indispensable. Yet, the long-standing obstacle to exploring ultralight superinsulation ceramic aerogels is the inaccessibility of its mechanical elasticity, stability, and anisotropic thermal insulation. Here, we report a recoverable, flexible ceramic fiber-aerogel composite with anisotropic lamellar structure, where the interfacial cross-linking between ceramic fiber and aerogel is important in its superinsulation performance. The resulting ultralight aerogel composite exhibits a density of 0.05 g/cm 3 , large strain recovery (over 50%), and low thermal conductivity (0.0224 W m –1 K –1 ), while its hydrophobicity is achieved by in situ trichlorosilane coating with the water contact angle of 135°. The hygroscopic tests of such aerogel composites demonstrate a reversible thermal insulation. The mechanical elasticity and stability of the anisotropic composites, with its soundproof performance, shed light on the low-cost superelastic aerogel manufacturing with scalability for energy saving building applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Unprecedented non-hysteretic superelasticity of [001]-oriented NiCoFeGa single crystals

Superelasticity associated with the martensitic transformation has found a broad range of engineering applications. However, the intrinsic hysteresis and temperature sensitivity of the first-order phase transformation significantly hinder the usage of smart metallic components in many critical areas. In this paper, we report a large superelasticity up to 15.2% strain in [001]-oriented NiCoFeGa single crystals, exhibiting non-hysteretic mechanical responses, a small temperature dependence and high-energy-storage capability and cyclic stability over a wide temperature and composition range. In situ synchrotron X-ray diffraction measurements show that the superelasticity is correlated with a stress-induced continuous variation of lattice parameter accompanied by structural fluctuation. Neutron diffraction and electron microscopy observations reveal an unprecedented microstructure consisting of atomic-level entanglement of ordered and disordered crystal structures, which can be manipulated to tune the superelasticity. The discovery of the large elasticity related to the entangled structure paves the way for exploiting elastic strain engineering and development of related functional materials. NiCoFeGa single crystals exhibit large non-hysteretic superelasticity over broad temperature and composition ranges. It is attributed to the continuous phase transition with applied stress, which is related to the fluctuation of entangled ordered and disordered crystal structures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Low Current and Analog Memristor with Ru as Mobile Species

The switching parameters and device performance of memristors are predominately determined by their mobile species and matrix materials. Devices with oxygen or oxygen vacancies as the mobile species usually exhibit a great retention but also need a relatively high switching current (e.g., >30 mu A), while devices with Ag or Cu as cation mobile species do not require a high switching current but usually show a poor retention. Here, Ru is studied as a new type of mobile species for memristors to achieve low switching current, fast speed, good reliability, scalability, and analog switching property simultaneously. An electrochemical metallization-like memristor with a stack of Pt/Ta2O5/Ru is developed. Migration of Ru ions is revealed by energy-dispersive X-ray spectroscopy mapping and in situ transmission electron microscopy within a sub-10 nm active device area before and after switching. The results open up a new avenue to engineer memristors for desired properties.

analog switching↗
DOE OSTI2020

Magnetic Damping Modulation in IrMn 3 / Ni 80 Fe 20 via the Magnetic Spin Hall Effect

Noncollinear antiferromagnets can have additional spin Hall effects due to the net chirality of their magnetic spin structure, which provides for more complex spin-transport phenomena compared to ordinary nonmagnetic materials. Here we investigated how ferromagnetic resonance of permalloy (Ni 80 Fe 20 ) is modulated by spin Hall effects in adjacent epitaxial IrMn 3 films. We observe a large dc modulation of the ferromagnetic resonance linewidth for currents applied along the [001] IrMn 3 direction. Furthermore, this very strong angular dependence of spin-orbit torques from dc currents through the bilayers can be explained by the magnetic spin Hall effect where IrMn 3 provides novel pathways for modulating magnetization dynamics electrically.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Strain Recovery and Defect Characterization in Mg‐Implanted Homoepitaxial GaN on High‐Quality GaN Substrates

The evolution of defects due to high‐pressure annealing of magnesium ion‐implanted epitaxial GaN grown on high‐quality GaN substrates is investigated. Changes in the implant‐induced strain are quantified as a function of annealing temperature and time. After annealing at 1300 °C for 10 min, the implant‐induced strain is fully relieved and accompanied by the presence of extended defects such as basal plane stacking faults and prismatic loops. Approximately one‐third of the original implant‐induced strain remains after annealing at 700 °C, and 5% of the original strain remains at 1000 °C for 100 min. In all cases, nearly all of the recovered strain occurs within first few minutes of annealing. A prominent increase in the asymmetric (104) triple axis X‐ray rocking curve full width at 0.01 maximum (FW0.01M) is observed after annealing at 1300 °C for 10 min. After annealing at 1300 °C for 100 min, a subsequent decrease in FW0.01M is correlated with a reduction of the extended defect density from 4 × 10 8 to 3 × 10 7 cm −2 , determined through transmission electron microscope (TEM) measurements. Further reduction in the density of the extended defects by optimizing annealing temperature and time is expected to improve the performance of GaN‐based vertical power devices.

Wang, Yekan↗
DOE OSTI2020

Solution Blowing Synthesis of Li-Conductive Ceramic Nanofibers

Solid state electrolytes (SSEs) offer great potential to enable high-performance and safe lithium (Li) batteries. However, the scale-up synthesis and processing of SSEs is a major challenge. In this work, three-dimensional networks of lithium lanthanum titanite (LLTO) nanofibers are produced through a scale-up technique based on solution blowing. Compared with the conventional electrospinning method, the solution blowing technique enables high-speed fabrication of SSEs (e.g., 15 times faster) with superior productivity and quality. Additionally, the room-temperature ionic conductivity of composite polymer electrolytes (CPEs) formed from solution-blown LLTO fibers is 70% higher than the ones formed from electrospun fibers (1.9 x 10 -4 vs 1.1 x 10 -4 S cm -1 for 10 wt % LLTO fibers). Furthermore, the cyclability of the CPEs made from solution-blown fibers in the symmetric Li cell is more than 2.5 times that of the CPEs made from electrospun fibers. These comparisons here show that solution-blown ion-conductive fibers hold great promise for applications in Li metal batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A mechanistic study of mesoporous TiO 2 nanoparticle negative electrode materials with varying crystallinity for lithium ion batteries

Nanoscale oxide-based negative electrodes are of great interest for lithium ion batteries due to their high energy density, power density and enhanced safety. In this work, we conducted a case study on mesoporous TiO 2 nanoparticle negative electrodes with uniform size and varying crystallinity in order to investigate the trend in the electrochemical properties of oxide-based nanoscale negative electrodes with varying crystallinity. Furthermore, mesoporous solid spherical TiO 2 nanoparticles with a uniform particle size and varying crystallinity, i.e. , amorphous TiO 2 (A-TiO 2 ), partially crystalline TiO 2 (PC-TiO 2 ) and fully crystalline TiO 2 (FC-TiO 2 ) nanoparticles were studied. At low current rate (quasi steady-state), the specific capacity of the samples drops with the decrease of crystallinity. Ex situ synchrotron pair distribution function analysis reveals that the 1D zigzag Li ion diffusion pathway becomes expanded with the increase of crystallinity, which promotes ion mobility and charge storage. At high current rates (away from equilibrium states), however, the A-TiO 2 sample demonstrates slightly larger capacity than the FC-TiO 2 sample, both of which show larger capacities than that of the PC-TiO 2 sample. Both A-TiO 2 and FC-TiO 2 samples exhibit higher capacitive contribution to the charge storage and larger Li + diffusivity than those of the PC-TiO 2 sample, which explains their better rate capability. Moreover, the larger Li + diffusivity of the A-TiO 2 sample leads to the slightly larger specific capacity than the FC-TiO 2 sample at the highest current rate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Boosting Superior Lithium Storage Performance of Alloy-Based Anode Materials via Ultraconformal Sb Coating–Derived Favorable Solid-Electrolyte Interphase

Alloy materials such as Si and Ge are attractive as high-capacity anodes for rechargeable batteries, but such anodes undergo severe capacity degradation during discharge-charge processes. Compared to the over-emphasized efforts on the electrode structure design to mitigate the volume changes, understanding and engineering of the solid-electrolyte interphase (SEI) are significantly lacking. This work demonstrates that modifying the surface of alloy-based anode materials by building an ultraconformal layer of Sb can significantly enhance their structural and interfacial stability during cycling. Combined experimental and theoretical studies consistently reveal that the ultraconformal Sb layer is dynamically converted to Li 3 Sb during cycling, which can selectively adsorb and catalytically decompose electrolyte additives to form a robust, thin, and dense LiF-dominated SEI, and simultaneously restrain the decomposition of electrolyte solvents. Hence, the Sb-coated porous Ge electrode delivers much higher initial Coulombic efficiency of 85% and higher reversible capacity of 1046 mAh g -1 after 200 cycles at 500 mA g -1 , compared to only 72% and 170 mAh g -1 for bare porous Ge. The present finding has indicated that tailoring surface structures of electrode materials is an appealing approach to construct a robust SEI and achieve long-term cycling stability for alloy-based anode materials.

25 ENERGY STORAGE↗
DOE OSTI2019

Morphological Control of Chromophore Spin State in Zinc Porphyrin–Peptide Assemblies

Self-assembled peptide micelles and fibers demonstrate unique control over the photophysical properties of the bound, light-activated chromophore, zinc protoporphyrin IX, (PPIX)Zn. Micelles encapsulate either a mixture of uncoordinated and coordinated (PPIX)Zn or all coordinated depending on the ratio of peptide/porphyrin. As the ratio increases toward a 1:1 micelle/porphyrin ratio, providing the chromophore with a discrete coordination environment reminiscent of unstructured proteins, the micelles favor triplet formation. Fibers, however, promote a linear array of porphyrin molecules that dictates exciton hopping and excimer formation at ratios as high as 60:1, peptide/porphyrin. However, even in fibers, the formation of the triplet species increases with increasing peptide/porphyrin ratio due to increased spatial separation between neighboring chromophores facilitating intersystem crossing. Full characterization of the micelles structures and comparison to the fibers lead to the comparison with natural systems and the ability to control the excited populations that have utility in photocatalytic processes. In addition, the incorporation of a second chromophore, heme, yields an electron transfer pathway in both micelles and fibers that highlights the utility of the peptide assemblies when engineering multichromophore arrays as inspired by natural, photosynthetic proteins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

In situ and operando investigation of the dynamic morphological and phase changes of a selenium-doped germanium electrode during (de)lithiation processes

To understand the effect of selenium doping on the good cycling performance and rate capability of a Ge 0.9 Se 0.1 electrode, the dynamic morphological and phase changes of the Ge 0.9 Se 0.1 electrode were investigated by synchrotron-based operando transmission X-ray microscopy (TXM) imaging, X-ray diffraction (XRD), and X-ray absorption spectroscopy (XAS). The TXM results show that the Ge 0.9 Se 0.1 particle retains its original shape after a large volume change induced by (de)lithiation and undergoes a more sudden morphological and optical density change than pure Ge. The difference between Ge 0.9 Se 0.1 and Ge is attributed to a super-ionically conductive Li–Se–Ge network formed inside Ge 0.9 Se 0.1 particles, which contributes to fast Li-ion pathways into the particle and nano-structuring of Ge as well as buffering the volume change of Ge. The XRD and XAS results confirm the formation of a Li–Se–Ge network and reveal that the Li–Se–Ge phase forms during the early stages of lithiation and is an inactive phase. The Li–Se–Ge network also can suppress the formation of the crystalline Li 15 Ge 4 phase. Finally, these in situ and operando results reveal the effect of the in situ formed, super-ionically conductive, and inactive network on the cycling performance of Li-ion batteries and shed light on the design of high capacity electrode materials.

25 ENERGY STORAGE↗