Search NASA⌕ Search

Engineering topics

Livengood, T.

Publications and source records attributed to Livengood, T..

Epithermal Neutron Evidence for a Diurnal Surface Hydration Process in the Moon's High Latitudes

We report evidence from epithermal neutron flux observations that show that the Moon's high latitude surfaces are being actively hydrated, dehydrated and rehydrated in a diurnal cycle. The near-surface hydration is indicated by an enhanced suppression of the lunar epithermal neutron leakage flux on the dayside of the dawn terminator on poleward-facing slopes (PFS). At 0600 to 0800 local-time, hydrogen concentrations within the upper 1 meter of PFS are observed to be maximized relative to equivalent equator-facing slopes (EFS). During the lunar day surface hydrogen concentrations diminish towards dusk and then rebuild overnight. Surface hydration is determined by differential comparison of the averaged EFS to PFS epithermal neutron count rates above +/- 75 deg latitude. At dawn the contrast bias towards PFS is consistent with at least 15 to 25 parts-per-million (ppm) hydrogen that dissipates by dusk. We review several lines of evidence derived from temperature and epithermal neutron data by a correlated analysis of observations from the Lunar Reconnaissance Orbiter's (LRO) Lunar Exploration Neutron Detector (LEND) that were mapped as a function of lunar local-time, Lunar Observing Laser Altimeter (LOLA) topography and Diviner (DLRE) surface temperature.

diurnal cycles↗

Bulk Insolation Models as Predictors for Locations for High Lunar Hydrogen Concentrations

In this study we consider the bulk effects of surface illumination on topography (insolation) and the possible thermodynamic effects on the Moon's hydrogen budget. Insolation is important as one of the dominant loss processes governing distributions of hydrogen volatiles on the Earth, Mars and most recently Mercury. We evaluated three types of high latitude > 65 deg., illumination models that were derived from the Lunar Observing Laser Altimetry (LOLA) digital elevation models (DEM)'s. These models reflect varying accounts of solar flux interactions with the Moon's near-surface. We correlate these models with orbital collimated epithermal neutron measurements made by the Lunar Exploration Neutron Detector (LEND). LEND's measurements derive the Moon's spatial distributions of hydrogen concentration. To perform this analysis we transformed the topographic model into an insolation model described by two variables as each pixels 1) slope and 2) slope angular orientation with respect to the pole. We then decomposed the illumination models and epithermal maps as a function of the insolation model and correlate the datasets.

Hydrogen Concentrations↗

Towards an Imaging Mid-Infrared Heterodyne Spectrometer

We are developing a concept for a compact, low-mass, low-power, mid-infrared (MIR; 5- 12 microns) imaging heterodyne spectrometer that incorporates fiber optic coupling, Quantum Cascade Laser (QCL) local oscillator, photomixer array, and Radio Frequency Software Defined Readout (RFSDR) for spectral analysis. Planetary Decadal Surveys have highlighted the need for miniaturized, robust, low-mass, and minimal power remote sensing technologies for flight missions. The drive for miniaturization of remote sensing spectroscopy and radiometry techniques has been a continuing process. The advent of MIR fibers, and MEMS techniques for producing waveguides has proven to be an important recent advancement for miniaturization of infrared spectrometers. In conjunction with well-established photonics techniques, the miniaturization of spectrometers is transitioning from classic free space optical systems to waveguide/fiber-based structures for light transport and producing interference effects. By their very nature, these new devices are compact and lightweight. Mercury-Cadmium-Telluride (MCT) and Quantum Well Infrared Photodiodes (QWIP) arrays for heterodyne applications are also being developed. Bulky electronics is another barrier that precluded the extension of heterodyne systems into imaging applications, and our RFSDR will address this aspect.

Hewagama, T.↗

Correlated Observations of Epithermal Neutrons and Polar Illumination for Orbital Neutron Detectors

We correlate Lunar Reconnaisance Orbiter's (LRO) Lunar Exploration Neutron Detector (LEND) and the Lunar Prospector Neutron Spectrometer's (LPNS) orbital epithermal neutron maps of the Lunar high-latitudes with co-registered illumination maps derived from the Lunar Orbiter Laser Altimeter (LOLA) topography. Epithermal neutron count rate maps were derived from the LEND: 1) Collimated Sensor for Epithermal Neutrons, CSETNI-4 2) Uncollimated Sensor for Epithermal Neutrons, SETN and the Uncollimated Lunar Prospector: 3) Low-altitude and 4) High-altitude mapping phases. In this abstract we illustrate 1) and 3) and include 2) and 4) in our presentation. The correlative study provides unique perspectives on the regional epithermal neutron fluences from the Lunar polar regions under different detector and altitude configurations.

McClanahan, T. P.↗

Estimation of Orbital Neutron Detector Spatial Resolution by Systematic Shifting of Differential Topographic Masks

We present a method and preliminary results related to determining the spatial resolution of orbital neutron detectors using epithermal maps and differential topographic masks. Our technique is similar to coded aperture imaging methods for optimizing photonic signals in telescopes [I]. In that approach photon masks with known spatial patterns in a telescope aperature are used to systematically restrict incoming photons which minimizes interference and enhances photon signal to noise. Three orbital neutron detector systems with different stated spatial resolutions are evaluated. The differing spatial resolutions arise due different orbital altitudes and the use of neutron collimation techniques. 1) The uncollimated Lunar Prospector Neutron Spectrometer (LPNS) system has spatial resolution of 45km FWHM from approx. 30km altitude mission phase [2]. The Lunar Rennaissance Orbiter (LRO) Lunar Exploration Neutron Detector (LEND) with two detectors at 50km altitude evaluated here: 2) the collimated 10km FWHM spatial resolution detector CSETN and 3) LEND's collimated Sensor for Epithermal Neutrons (SETN). Thus providing two orbital altitudes to study factors of: uncollimated vs collimated and two average altitudes for their effect on fields-of-view.

McClanahan, T. P.↗

Jovian Northern Ethane Aurora and the Solar Cycle

Thermal infrared auroral spectra from Jupiter's North polar region have been collected from 1979 to 1998 in a continuing study of long-term variability in the northern thermal IR aurora, using C2H6 emission lines near 12 microns as a probe. Data from Voyager I and 2 IRIS measurements and ground based spectral measurements were analyzed using the same model atmosphere to provide a consistent relative comparison. A retrieved equivalent mole fraction was used to compare the observed integrated emission. Short term (days), medium term (months) and long term (years) variability in the ethane emission was observed. The variability Of C2H6 emission intensities was compared to Jupiter's seasonal cycle and the solar activity cycle. A positive correlation appears to exist, with significantly greater emission and short term variability during solar maxima. Observations on 60 N latitude during increased solar activity in 1979, 1989, and most recently in 1998 show up to 5 times brighter integrated line emission of C2H6 near the north polar "hot spot" (150-210 latitude) than from the north quiescent region. Significantly lower enhancement was observed during periods of lower solar activity in 1982, 1983, 1993, and 1995. Possible sources and mechanisms for the enhancement and variability will be discussed.

Kostiuk,T.↗

Temporal Behavior of Ammonia and Temperature in the Jovian Stratosphere following the SL9 Impacts

We will present new results in the study of temporal changes in ammonia (NH3) abundance, altitude distribution, and temperature in the stratosphere of Jupiter after the Comet Shoemaker-Levy 9 impact in 1994. Data obtained by Betz et al. (1994) using infrared heterodyne spectroscopy were analyzed using a newly developed beam integration radiative transfer code. The spectra are from six different impact regions and were acquired from hours to three weeks following the impact. The data consist of single NH3 stratospheric emission line profiles near 10 microns measured at a resolving power of approximately 10(exp 7). The true line profiles and the new radiative transfer program permitted the simultaneous retrieval of information on both the NH3 abundance and thermal structure as well as to set constraints on the altitude distribution of stratospheric ammonia. Retrieved column densities varied from approximately 10(exp 18) to 10(exp 16) over the three week period. Over the same time period the altitude of the emitting region varied from levels above the few mbar pressure region to below the 50 mbar pressure regions. Stratospheric temperatures hours after impact were approximately 220 K and about 8 days after impact returned to the quiescent levels (approximately 170-180 K). Results from this self-consistent set of measurements will be presented, compared to those from other measurements, and compared to theoretical retrievals from photochemical models for NH3 in the Jovian stratosphere.

Kostiuk, Ttheodor↗