Search NASA⌕ Search

Engineering topics

Loomis, Eric Nicholas

Publications and source records attributed to Loomis, Eric Nicholas.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Mechanisms of shape transfer and preheating in indirect-drive double shell collisions

Implosions of Hohlraum-driven double shell targets as an alternative inertial confinement fusion concept are underway at the National Ignition Facility. The double shell system relies on a series of energy transfer processes starting from thermal x-ray absorption by the outer shell, followed by collisional transfer of kinetic energy to a heavy metal inner shell, and finally, conversion to the internal energy of the deuterium-tritium fuel. During each of these energy transfer stages, low-mode asymmetries can act to reduce the ideal transfer efficiency degrading double shell performance. Mechanisms, such as hard x-ray preheat from the Hohlraum, not only decrease the efficiency of kinetic energy transfer but may also be a source of low-mode asymmetry. In this article, we evaluate the shape transfer processes through the time of shell collision using two-dimensional integrated Hohlraum and capsule computations. We find that the dominant mode of the shape transfer is well described using a “radial impulse” model from the shape of the foam pressure reservoir. To evaluate the importance of preheat on inner shell shape, we also report on first measurements of Au L-shell preheat asymmetry in a double shell with a tungsten pusher. These measurements showed a 65% higher preheat velocity at the pole of the capsule relative to the equator. We also found that the experiments provided rigorous constraints by which to test the Hohlraum model settings that impact the amount and symmetry of Au L-shell preheat via the plasma conditions inside the outer cone Au bubble.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Postshot report for double shell 2-axis keyhole NIF experiment N210224-001 [Slides]

The goal of this experiment is to measure preheat and shock symmetry in a double shell capsule. The campaign objective is to assess preheat and shock symmetry in high-Z double shells, and the shot objective is to measure preheat motion to ~0.2 km/s and shock breakout symmetry to ~100 ps.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2021

Coupling 1D xRAGE simulations with machine learning for graded inner shell design optimization in double shell capsules

Advances in machine learning provide the ability to leverage data from expensive simulations of high-energy-density experiments to significantly cut down on computational time and costs associated with the search for optimal target designs. This study presents an application of cutting-edge Bayesian optimization methods to the one-dimensional (1D) design optimization of double shell graded layer targets for inertial confinement fusion experiments. This investigation attempts to reduce hydrodynamic instabilities while retaining high yields for future NIF experiments. Machine learning methods can use predictive physics simulations to identify graded layer designs from within the vast design space that demonstrate high predicted performance, including novel designs with high uncertainty in performance that may hold unexpected promise. By applying machine learning tools to the simulation design, we map the trade-off between 1D yield and instability, specifically isolating parameter ranges, which maintain high performance while showing significantly improved Rayleigh–Taylor stability over the point design. Furthermore, the groundwork laid in this study will be a useful design tool for future NIF experiments with graded layer targets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Los Alamos LDRD Appraisal Final Report for 20190124ER [Hot Electron Beam Generation and Transport for Fast Ignition]

This project was successful in addressing key technical issues of the cone-guided electron fast ignition concept for ICF. The development of an e-beam to deliver energy of 10’s of kilojoules to HED targets would be useful for myriad experimental applications relevant to the Laboratory’s mission. For example, ICF ignition and the development of a burning plasma is a high priority for the national high energy density physics effort and this work is aligned with that mission. Moreover, other technologies (e.g., MeV laser radiography) would be advanced by the R&D advancements from this project, so this work has broader implications for other LANL missions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Symmetry requirements for double shell capsules with aluminum ablators

Double shell targets present a promising avenue to obtain robust neutron yield on current laser facilities. The nature of the target, like current single shell designs, requires a symmetric implosion of an outer ablator to obtain a symmetric fuel volume that will lead to alpha heating and thermonuclear burn. Due to using aluminum as an ablator material and requiring different convergence than single shell symmetry studies at various energies are required. This paper moves forward from previous experiments conducted at 1MJ to show implosion symmetry at 1.25 and 1.5MJ. Symmetry in these experiments is sufficient to merit experiments using double shells to study the platform further. Additional studies are carried out on the outer shell symmetry impacts, showing that mitigating mode growth on the outer ablator is of great importance.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Detrimental effects and mitigation of the joint feature in double shell implosion simulations

Double shell capsules provide an attractive option in inertial confinement fusion experiments due to their potential for achieving a low-convergence, robust burn. However, these designs suffer from symmetry degradation and accompanying reduced fuel confinement due to the currently necessary joint between the two hemispheres of the outer shell. Here, the gap widens as a result of the excess ablation pressure produced by x rays that penetrate the joint during the drive phase, and this perturbation grows and imprints onto the inner shell during the collision. xRAGE Eulerian radiation-hydrodynamic simulations predict significant reductions in deuterium–tritium fusion yields compared to joint-less simulations when the depth of the outer joint is increased, whereas the performance is less sensitive to the depth of the inner gap. Here we examine the technique of plating the insides of the outer gap with a high-Z material to mitigate the impact of this feature. Gold-plating in quantities comparable to or exceeding the “missing” outer shell mass shows promise toward restoring both implosion symmetry and yield closer to the joint-less levels, and synthetic diagnostics suggest that high-energy x-ray radiographs can capture this shape retention of the inner and outer shells in experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Single and Double Shell Ignition Targets for the National Ignition Facility at 527 nm

Converting and using the National Ignition Facility (NIF) to deliver 527 nm light instead of its current 351 nm would allow the laser to deliver more energy and power to ignition targets. We update previous 527 nm target design work to reflect more contemporary target designs using high-density carbon capsules and low density helium gas filled Hohlraums. We extend single shell capsule designs based on current experimental results to higher energy and power and also explore double shell capsules, both driven by green light. These studies were completed using detailed pulse shapes found for targets that converged with acceptable 2D implosion symmetries and then used the Lava Lamp II code to confirm their feasibility at NIF. A 1.2× dimensional scaleup of one tuned NIF target at the limit of its current 351 nm capabilities and shot 170827 uses 3.3 MJ, at the limit of the current NIF's 527 nm capability. With the less-structured pulse of a double shell target, 3.7 MJ could be delivered by the laser. Our LPI calculations do not preclude operation at 527 nm, particularly for low fill Hohlraums, and suggest that the stimulated Raman backscatter may be no worse than the small quantities seen in 170827; stimulated forward Raman scattering may be present. If Stimulated Brillouin Scattering is too great, the much greater laser bandwidth available at 527 nm could be used to decrease backscatter. These larger targets with higher energy and power may offer a better chance of achieving ignition with only modest changes to the NIF laser.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Neural network for 3D inertial confinement fusion shell reconstruction from single radiographs

In inertial confinement fusion (ICF), x-ray radiography is a critical diagnostic for measuring implosion dynamics, which contain rich three-dimensional (3D) information. Traditional methods for reconstructing 3D volumes from 2D radiographs, such as filtered backprojection, require radiographs from at least two different angles or lines of sight (LOS). In ICF experiments, the space for diagnostics is limited, and cameras that can operate on fast timescales are expensive to implement, limiting the number of projections that can be acquired. To improve the imaging quality as a result of this limitation, convolutional neural networks (CNNs) have recently been shown to be capable of producing 3D models from visible light images or medical x-ray images rendered by volumetric computed tomography. Here, we propose a CNN to reconstruct 3D ICF spherical shells from single radiographs. We also examine the sensitivity of the 3D reconstruction to different illumination models using preprocessing techniques such as pseudo-flatfielding. To resolve the issue of the lack of 3D supervision, we show that training the CNN utilizing synthetic radiographs produced by known simulation methods allows for reconstruction of experimental data as long as the experimental data are similar to the synthetic data. We also show that the CNN allows for 3D reconstruction of shells that possess low mode asymmetries. Further comparisons of the 3D reconstructions with direct multiple LOS measurements are justified.

3D Reconstruction↗
DOE OSTI2021

Constraining computational modeling of indirect drive double shell capsule implosions using experiments

Double shell capsule implosions are an alternative approach to achieving alpha heating on the National Ignition Facility. Current machining techniques construct the outer shell as two hemispheres that are glued together, and the deuterium and tritium (DT) liquid inside the inner shell will be injected by a fill tube. These features introduce asymmetries and jetting that may disrupt the confinement of the DT fuel if not carefully controlled. Simulations indicate that in order to achieve high yields in the laboratory, these features as well as susceptibility to the Rayleigh–Taylor instability (RTI) must be mitigated. Furthermore, due to uncertainties in computational models and the expense of using the best physics models at adequate resolution in three dimensions, our computational modeling must be constrained by experiments. We report on the results of recent hydrogrowth radiography and dual-axis keyhole experiments with double shell targets that have been used to evaluate our modeling of the outer shell joint as well as the impacts of high-energy x-ray preheat that strongly impacts RTI growth. Our simulations show good agreement with the experimental data and inform several important modeling choices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

CT analysis of double shell targets

We are more accurately determining the initial conditions of our double shell targets used for ICF: Fusion has the capability to provide clean, safe energy; We are studying double shell capsules to determine if ignition is possible; We have taken CT scans of the initial target and analyzed these scans for roundness; We are developing a method to analyze these scans.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Uncertainties in Density and Simulation Parameters for Radiographic Reconstructions Using Machine Learning

We will develop new and improved methods that will enable a fuller and more extensive use of experimental data, such as from radiographic imaging, towards better characterizing and reducing uncertainties in predictive modeling of weapons performance. We will achieve this by leveraging recent developments in the areas of computational imaging, statistical and machine learning, and reduced order modeling. Key new aspects of our approach include (a) a coupling of deep learning based density reconstruction with fast hydrodynamics simulators that will permit the development of certain guarantees on extrapolatability and bounds on certain other hydrodynamics-related para- metric uncertainties and (b) a dual approach towards better characterizing uncertainties in density reconstruction using deep learning based surrogates to accelerate Bayesian reconstructions on the one hand and using variational inference and Bayesian machine learning on the other hand.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2020

Preshot Report for the NIF Discovery Science DDCyl Campaign: D_Hyd_DDCyl_DRT_DDD/EEE/FFF

The first Discovery Science shot day with the NIF DDCyl campaign demonstrated that Rayleigh-Taylor instability growth during the deceleration phase is scale-invariant for targets that varied in radial dimension and implosion time-scale by a factor of three. Smaller cylindrical implosions at the OMEGA laser facility were compared to the larger cylinders fielded in our first NIF outing. Both sets of targets had an initial m = 20 sinusoidal perturbation machined on the inner surface of an embedded aluminum marker layer, with the amplitude larger by the same factor of three for the NIF-scale targets. We observed growth factors of 14 at late time (t=λ = 7:7 ns, where λ = 1 for OMEGA and λ = 3 for NIF). These used a high density (300 mg/cm³) CH foam core, providing a very long period of deceleration before the rebounding shock hit the incoming spike tips, but the final convergence was only CR≈ 2:25. For our second shot day with this campaign, we are attempting to increase the convergence ratio to CR≥ 5 before reshock, while still measuring instability growth during the convergence/deceleration phase. As discussed in previous reports, the best way to increase convergence before reshock is to lower the density of the central foam. The preshot designs called for the use of a 30 mg/cm³ CH foam, though the as-built foams are closer to 40-42 mg/cm³, which is predicted to result in a final CR≈ 5:1 before reshock. Other than the lower foam density, the target design is identical to those used previously.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Design of Cylindrical Implosion Experiments to Demonstrate Scale-Invariant Rayleigh-Taylor Instability Growth

Radiation-hydrodynamics simulations are used to design laser-driven cylindrical implosion experiments to directly measure hydrodynamic instability growth in convergent geometry. Designs for two different size targets, varying in radial dimension by a factor of three, are presented. A set of beam pointings and powers are identified for each scale design that result in a nearly axially uniform implosion of an embedded marker layer. The implosion trajectories are shown to be scale-invariant between designs, with nearly identical scaled acceleration profiles. Finally, linear theory and radiation-hydrodynamics simulations predict that Rayleigh-Taylor instability growth of an azimuthal perturbation, machined on the inner surface of the embedded marker, is also scale-invariant between designs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Demonstration of Scale-Invariant Rayleigh-Taylor Instability Growth in Laser-Driven Cylindrical Implosion Experiments

Rayleigh-Taylor instability growth is shown to be hydrodynamically scale-invariant in convergent cylindrical implosions for targets that varied in radial dimension and implosion timescale by a factor of three. The targets were driven directly by laser irradiation providing a short impulse, and instability growth at an embedded aluminum interface occurs as it converges radially inward by a factor of2.25 and decelerates on a central foam core. Late-time growth factors of 14 are observed for a single-modem= 20 azimuthal perturbation at both scales, despite the differences in laser drive conditions between the experimental facilities, consistent with predictions from radiation-hydrodynamics simulations. This platform enables detailed investigations into the limits of hydrodynamic scaling in high-energy-density systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Using cylindrical implosions to investigate hydrodynamic instabilities in convergent geometry

Hydrodynamic instabilities such as the Rayleigh–Taylor (RT) and Richtmyer–Meshkov instabilities disrupt inertial confinement fusion (ICF) implosions through the growth of 3D perturbations. Growth of these 3D imperfections at the interfaces of an ICF capsule during implosion lead to mixing between materials that is detrimental to performance. These instabilities have been studied extensively in planar geometry, but such experiments lack the effects of convergence in spherical implosions. While several studies have been performed in spherical geometry, these often lack a direct means to measure perturbation growth. Experiments in cylindrical geometry include convergence effects while maintaining direct diagnostic access. Although cylinders have less compression than spheres, they do provide an excellent platform to validate modeling for convergent geometries. The problem with previous cylindrical implosion experiments was that the convergence ratios were limited to ~4. With the National Ignition Facility (NIF), larger cylindrical targets can be driven to convergences of 10–15 while maintaining a large enough final diameter to measure perturbation growth. This paper reviews the design process used to both benchmark radiation hydrodynamics codes and enable 1D post-processed simulations to explore design space to separate compression effects from acceleration/deceleration RT instability. Results from 1D simulations suggest that cylindrical implosions on the NIF can produce high-convergence experiments to validate RT instability growth for ICF implosions.

36 MATERIALS SCIENCE↗