Search NASA⌕ Search

Engineering topics

Lopano, Christina

Publications and source records attributed to Lopano, Christina.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Characterization Inform Sustainable Recovery of Critical Minerals from Fossil Energy Waste Feedstocks

Rare earth elements (REE) and other critical minerals (CM, e.g., Co, Ni, Li) have important uses in green energy and modern technologies, yet are vulnerable to potential supply chain disruptions. One potential domestic CM source is fossil energy wastes, such as acid mine drainage (AMD) and treatment solids (AMD solids), coal combustion ash, and Oil and Gas (O&G) drilling wastes (drill cuttings and produced waters). While they can contain lower CM concentrations then traditional ore, the quantity and fast availability as waste feedstock makes them a promising CM resource. To explore their promise, researchers at DOE’s National Energy Technology Laboratory (NETL) have collected and analyzed CM data for aforementioned fossil energy wastes, and utilized advanced geochemical characterization (e.g., synchrotron microprobe and sequential extraction) to identify the CM speciation and binding environments, and developed sustainable and targeted CM recovery. Successful examples include: (1) the discovery of easily mobile REE phases in Ca-rich coal combustion ash and developing a patented REE recovery process from Ca-rich Powder River Basin coal ash; (2) the successful identification of REE/Co/Ni/Zn hosting phases in acid mine drainage treatment solids (AMD solids) with diverse chemical composition (Al, Mn, or Fe-rich) informing the sequential recovery of different REE/CMs from AMD solids; (3) the recovery potential of Li and other CMs in O&G produced waters and drill cuttings. The innovations driven by characterization have the potential to offset the cost of waste management and wastewater treatments while reducing the cost and environmental footprint of CM extraction.

Stuckman, Mengling↗
DOE OSTI2024

Identifying Critical Mineral Binding Mechanisms and Distribution in Acid Mine Drainage Treatment Solids to Inform Targeted Recovery Methods

In this study, micro-X-ray Fluorescence and micro/bulk X-ray Adsorption Near Edge Spectroscopy were collected at Stanford Synchrotron Radiation Lightsource and the Advanced Photon Source to: (1) gain a detailed characterization of critical minerals in Fe/Mn (hydr)oxide host phases; and (2) investigate the Co/Ni coordination and redox speciation associated with Fe/Mn (hydr)oxides phases in AMD solids with diverse composition (e.g., Al-rich, Mn-rich, Al/Mn/Fe-rich). Preliminary results show co-location of Co/Ni within Mn-rich hotspots, while Fe-rich hotspots were associated with heavy REEs. In Al-rich solids, Mn speciation was mostly comprised of Mn+3/+4 oxides, while the Mn-rich solids contain predominately Mn+4. These results suggest the AMD matrix plays an important role in how Co/Ni are coordinated, which aids in evaluating the efficacy to utilize AMD solids as a resource, and informs other novel sorbent and recovery technologies.

Hoffman, Colleen↗
DOE OSTI2024

Targeted Rare Earth Element Extraction from Mine Drainage Treatment Solids Informed by Advanced Characterization

In support of a clean energy transition in the U.S., National Energy Technology Laboratory (NETL) has collaborated with staff at Hedin Environmental and students at the University of Pittsburgh to characterize critical mineral content and recovery potential from acid mine drainage treatment solids (AMD solids). AMD solids in Appalachia are an unconventional feedstock of rare earth elements (REEs), with potential of suppling 1,102 tons REE/year. To inform recovery efforts, select AMD solids were examined using synchrotron microprobe analysis in conjunction with USGS-developed geochemical modeling to indicate likely phases hosting critical minerals (REE, Co, Ni, etc.) and associated metals . More than 100 AMD solids were collected from 94 passive AMD treatment systems in Pennsylvania, where limestone aggregates are used for acidity neutralization. As pH increases, dissolved metals and critical minerals in AMD are attenuated as surface coatings on limestone. The collected AMD solids contained up to 2000 mg/kg REE, up to 13,000 mg/kg transition metals (Co, Ni, Zn) and up to 440 mg/kg Li. Regardless of the diverse chemical compositions from AMD solids (Al-rich, Mn-rich, or Al,Fe,Mn-rich), REEs were mostly associated with Al and Mn (hydr)oxides, while select heavy REEs (e.g., Gd, Dy) were co-localized with Fe (hydr)oxides. Co and Ni have different distribution zones, while both co-localized with Mn (hydr)oxides. Based on this characterization, NETL developed a patent-pending innovative step-leaching protocol, “Targeted Rare Earth Extraction (TREE)” to effectively recover up to 90% REE and 60% Co in separate steps. In addition, select post-TREE solid residuals (purified Al oxides, or Mn oxides) can be further developed into functional materials (e.g., lithium and CO2 sorbents) needed for green energy transition and carbon management. This characterization-informed approach as well as TREE processing from AMD solids can be used for other legacy wastes (e.g., coal ash, oil and gas drill cutting, mine tailings), and offers an opportunity to transform waste streams into environmental and economic assets that meet U.S. Department of Energy and U.S. Environmental Protection Agency goals.

characterization and extraction of rare earth elem↗
DOE OSTI2024

Characterization of Oil and Gas Drill Cuttings for Critical Mineral Recovery and Reuse Potential as Soil Supplements

Expansion of unconventional oil and natural gas production over the last decade in the United States has resulted in record production of natural gas and oil in 2024. Millions of tons of drill cuttings generated from shale gas development are currently disposed of in landfills. Converting these cuttings into value product(s) such as critical minerals (CMs) and soil supplements, has the potential of reducing environmental impact of fossil fuel exploration. In this study we characterize the CM distribution and extractability from collected drill cuttings and core samples from major U.S. shale formations. A four-step sequential extraction, consisting of a sonicated soap step, sonicated EDTA step , mildly reducing agent, and a oxidizing agent, was developed to simultaneously extract CMs and convert the drill cuttings into soil supplements. Viability of converted drill cuttings as soil supplement was determined with a seedling growth experiment. Results show high concentrations of vanadium (V) (up to 1575 ppm, barite (up to 5 wt. %), and rare earth elements (REE) concentrations (up to 253 ppm). High extractability of selected critical minerals such as REE (19-50%) and Ba (10-58%) show promising results. Preliminary results show seedling growth in a mixture of converted drill cuttings with soil. These results show the potential for recovery of CMs from drill cuttings as an alternative domestic and the reduction of the environmental impact of fossil fuel production.

Barczok, Maximilian↗
DOE OSTI2024

Characterizing cobalt sequestration in manganese-rich coal mine drainage treatment solids

This study investigates Co adsorption on synthesized birnessites over a wide pH range and in sulfate-rich solution to simulate CMD treatment conditions. Langmuir and Freundlich adsorption isotherms of Co at pH values of 3.5, 4.5, and 6.5 at 25°C onto Na-and H-birnessite were generated. Cobalt concentrations in supernatants were determined by ICP-MS and chelation ion chromatography. Mineralogy and morphology of pre- and post-adsorption experiment solids characterization by X-ray diffraction and scanning electron microscopy will be presented. These experiments suggest that cobalt sulfate complexes and pH of CMD, as well as the Mn-oxide mineral structures present in treatment beds, will impact cobalt adsorption in CMD solids, and can be used as calibration points for equilibrium and kinetic modeling approaches that are critical for developing effective and implementable remediation processes and to better inform future Co recovery efforts from CMD solids.

Schaffer, Camille↗
DOE OSTI2024

Synthesizing Lithium Sorbents Using Acid Mine Drainage Solids

In this study, we prepared HMO from coal mine drainage (CMD) solids and examined the practicability of recovering Li from oil and gas produced waters and geothermal brines. We aim to innovate high-value added products from the existing extract REEs and CMs processing chain of legacy byproducts associated with coal production. CMD solids, which are precipitates collected from exhausted limestone gravels of passive CMD treatment beds, are enriched in rare earth elements (REEs) and other critical minerals (CMs), and therefore, considered as a viable alternative source for REEs/CMs to supply the Nation’s demands. A patented extraction process developed by NETL (TREE) has been demonstrated as a cost-effective and efficient approach to recover REEs/CMs from CMD solids. Here, we selected residuals of CMD solids from the TREE process that are enriched in manganese (Mn) (>20% w/w) and successfully prepared LMO using a solid-state method modified from Yoshizuka et al. (2002).

Cheng, Chin-Min↗
DOE OSTI2023

Geochemical characterization of lithium deposition in fossil energy wastes

Lithium is a critical mineral used in rechargeable batteries for electric vehicles (EVs) and future modernization of electric grids with sensitive supply chains that are subject to volatility. Therefore, methods to recover lithium from domestic unconventional sources are actively being pursued in the United States. Herein, we report on the lithium recovery potential from four fossil energy waste feedstocks: oil and gas drill cuttings (sample number n = 16); oil and gas produced waters (n > 200) from Marcellus, Bakken and Permian basins; coal byproducts (n>20), such as coal ash; and acid mine drainage treatment solids (AMD solids). Select solid samples underwent sequential extraction to explore lithium hosting phases and simple organic and inorganic acid extraction to explore lithium recovery potential. Our preliminary results found lithium concentrations up to 440 mg/kg in select AMD treatment solids and up to 300 mg/L in Marcellus Shale produced waters, demonstrating these sources have lithium yield potentials comparable to conventionally mined lithium ores and brines. Sequential extractions revealed that lithium is mostly associated with clay and silicate phases in shale drill cuttings, whereas lithium resides in Fe,Mn-oxide reducible phases in AMD solids. Further, the lithium content in produced waters has a strong linear relationship with total dissolved solid (TDS) levels in three separate oil and gas basins. At the same TDS level, Marcellus Shale produced waters contain more lithium compared to Bakken Shale and Permian Basin waters, with higher percentages of Ca and Mg, major cations that might impact lithium recovery efficiencies. Our study demonstrates the heterogeneity of lithium hosts from different fossil energy wastes. Characterization results will inform future lithium recovery from these different feedstocks.

Stuckman, Mengling↗
DOE OSTI2023

Novel Geochemistry Determined from High P-T Simulation Experiments of HFTS 2

A standard method in unconventional oil and gas production is the process of hydraulic fracturing followed by a shut-in period, during which the fracture fluid remains pressurized in the reservoir for up to three weeks before production begins. Despite this widely used process, very little is known about what occurs in the reservoir during this shut-in process. In order to properly delineate potential reservoir reactions that may occur during shut-in that would lead to corrosion and scaling events, experiments were conducted in high pressure, high temperature reactors to simulate conditions of the Wolfcamp Formation in the Delaware Basin. Experimental design allowed the assessment of the effect of proppant, microbiology, and time on the mineralogy and fluid chemistry in the reservoir. Results suggest the biggest impact on fluid chemistry and shale mineralogy during shut-in is time. Analyses demonstrate dissolution of the shale material, with maximum dissolved ions occurring after 7 days of the shut-in period. After 21 days, results suggest precipitation occurs. The Delaware Basin is demonstrated to be high in sulfate content, which further increases in the fluid due to dissolution reactions during shut-in. The pressure vessel experiments suggest there was no significant contribution to reactions from microbiology during the shut-in period. However, early production samples demonstrate a significant selection of the microorganism Caminicella, a genus of which has previously been correlated to corrosion and sulfide production. Results suggest shut-in conditions may provide high sulfate concentrations that could later be utilized by a shifted microbial community to drive potential well infrastructure failure. This is the first study to incorporate microbiology, mineralogy, and fluid chemistry to investigate the fundamental geochemical reactions that occur during shut-in and early phase production of the Delaware Basin. Results from this study can complement observations from the Hydraulic Fracture Test Site 2 observations.

Gulliver, Djuna↗
DOE OSTI2022

Fe Oxidation and Species Distribution at the Rock–Fluid Interface of Marcellus Shale Reacted with Hydraulic Fracturing Fluid

Hydraulic fracturing of shale reservoirs resulted in significant opportunity for increased oil and gas production in the United States. Rock-fluid interactions can cause mineral dissolution and precipitation reactions that lead to permeability changes in the shale matrix, which ultimately may affect transport pathways and hydrocarbon production. Understanding the distribution of secondary precipitates, such as barite and Fe(III) (hydro)oxides, and cation leaching at the rock-fluid interface is an important step to further investigate how these geochemical processes can change permeability and transport pathways. In this study, thin sections of the fracture-matrix interface were made from reacted Marcellus shale cores. The thin sections were characterized using synchrotron X-ray fluorescence imaging and synchrotron X-ray absorption spectroscopy. Fe species with different oxidation states were identified in the maps, together with barite and Ca distribution. The results show that ferrihydrite, as newly formed Fe(III)-bearing precipitates, aligned well with the border of the Ca (e.g., calcite) leaching region in the reaction front. Some Fe-containing clay also dissolved, but the dissolution region for the clay was not as deep as the calcite. Further, the reaction front is about three times deeper in the direction parallel to the shale bedding than that perpendicular to the bedding. The Ca leaching region can be an index for reaction front detection for Marcellus shale. Reactive transport modeling was conducted and the predicted Ca leaching boarder align well with ferrihydrite precipitation, consistent with the experimental observation. The carbonate mineral dissolution can be crucial to promote fluid access into the shale matrix. Together with our previous study on the shale reactive surface, this follow-up study showed similar Ca leaching region and Fe(III) precipitates distribution in the reaction front regardless of barite precipitation on the surface, indicating that the barite coatings on the surface may not pose a significant impact on reactive transport at the shale-fluid interface.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2022

Determination of transition metal ions in fossil fuel associated wastewaters using chelation ion chromatography

Here, this study outlines the development and subsequent validation of a method using chelation ion chromatography (CIC) pretreatment followed by traditional ion chromatography (IC) and post column UV/vis detection to measure transition metals in fossil fuel wastewaters, such as oil & gas (O&G) brines and coal mine drainage (CMD) waters. Measurement of transition metals is often an important characterization step in the research of environmental and energy systems. IC represents one way to measure these metals with the advantages of being versatile, simple and relatively low cost compared to other analytical methods. However, high concentrations of alkali and alkaline earth metals present in fossil fuel wastewaters will decrease IC detectability of transition metals in these waters. In this study, a CIC method was developed for the analysis of transition metal ions (Fe 3+ , Cu 2+ , Ni 2+ , Zn 2+ , Co 2+ , Mn 2+ , and Fe 2+ ) in fossil fuel associated wastewaters such as Appalachian CMD and O&G wastewaters from the Permian and Bakken shale basins in the United States. CIC system incorporated an on-line chelator column (e.g., the MetPac CC-1) with high selectivity for transition metals over alkali and alkaline earth metals for salt matrix removal prior to transition metal separation and detection. Additional method developments also included acidifying all samples to 2% v/v HCl and using gradient elution rather than isocratic. The recoverability of transition metals in simple salt solutions commonly found in CMD and brine samples (e.g. NaCl, Na 2 SO 4 , CaCl 2 ) using CIC was evaluated and compared to that using traditional IC. Our results found that the CIC system significantly improved transition metal recoveries for samples in 10,000 mg/L CaCl 2 matrix, reaching 87%-108% recovery for all analytes, as opposed to 2-323% recovery in traditional IC. The limits of detection in this study achieved 10.09 – 161.2 μg/L, comparable to reported values in similar IC studies. The developed method was also verified with certified water samples, resulting in 89% - 111% recoveries in samples with higher analyte concentrations (i.e. >4x the LoDs). The developed method achieved 87% -112% recoveries for most analytes in CMD samples and 72%-138% recoveries for Bakken shale samples, relative to ICP-MS values. Overall, the current IC method can be a very good screening tool for fast and cheap analysis for transition metals at mg/L level, to facilitate selection of samples for more detailed ICP-MS analysis.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

An Integrated Multiscale Modeling Framework for Unconventional Stimulation and Production (Final Report)

The production of oil and gas from unconventional reservoirs largely depends upon two main features operating at different scales: (1) the establishment of a reservoir scale stimulated fracture network that effectively communicates with the rock volume, enhancing permeability and transport to the wellbore and (2) the coupled multi-phase flow, chemical and mechanical processes affecting the migration of hydrocarbons from the low permeability country rock adjacent to the stimulated fracture network. To date, there has been no simulation framework that allows seamless and integrated prediction of these features across spatial scales extending from the pore structure of the reservoir rock to the volume of the reservoir. In addition, there has been a lack of suitable field measurements to test such models, as stimulation and production data are often proprietary and not freely available to national laboratories and academic institutions. New multi-scale simulation capabilities are needed that are validated against suitable field-based research experiments on hydraulic fracturing and shale production.

02 PETROLEUM↗