Search NASA⌕ Search

Engineering topics

Lorraine A. Remer

Publications and source records attributed to Lorraine A. Remer.

A Dark Target research aerosol algorithm for MODIS observations over eastern China: increasing coverage while maintaining accuracy at high aerosol loading

Satellite aerosol products such as the Dark Target (DT) produced from the MODerate resolution Imaging Spectroradiometer (MODIS) are useful for monitoring the progress of air pollution. Unfortunately, the DT often fails to retrieve during the heaviest aerosol events as well as the more moderate events in winter. Some of the literature at-tributes this lack of retrieval to the cloud mask. However, we found this lack of retrieval is mainly traced to thresholds used for masking of inland water and snow. Modifications to these two masks greatly increase 50 % of the retrievals of aerosol optical depth at 0.55 μm (AOD) greater than 1.0. The “extra”-high-AOD retrievals tend to be biased when com-pared with a ground-based sun photometer (AErosol RObotic NETwork, AERONET). Reducing bias in new retrievals re-quires two additional steps. One is an update to the assumed aerosol optical properties (aerosol model); the haze in this region is both less absorbing and lower in altitude than what is assumed in the global algorithm. The second is account-ing for the scale height of the aerosol, specifically that the heavy-aerosol events in the region are much closer to the surface than what is assumed by the global DT algorithm. The resulting combination of modified masking thresholds, new aerosol model, and lower aerosol layer scale height was applied to 3 months of MODIS observations (January–March2013) over eastern China. After these two additional steps are implemented, the significant increase in new retrievals introduces no overall bias at a high-AOD regime but does degrade other overall validation statistics. We also find that the research algorithm is able to identify additional pollution events that AERONET instruments may not due to different spatial sampling. Mean AOD retrieved from the re-search algorithm increases from 0.11 to 0.18 compared to values calculated from the operational DT algorithm during January to March of 2013 over the study area. But near Beijing, where the severe pollution occurs, the new algorithm increases AOD by as much as 3.0 for each 0.5°grid box over the previous operational-algorithm values.

Dark Target↗

Satellite-Detected Ocean Ecosystem Response to Volcanic Eruption in the Subarctic Northeast Pacific Ocean

Volcanic eruptions in the Aleutian archipelago during the summer of 2008 deposited large quantities of iron-laden ash to the Subarctic North Pacific Ocean. The surface ocean ecosystem response has been previously characterized using limited in situ and autonomous field measurements and numerical modeling, but basin-scale satellite remote sensing has been limited to a simple description of chlorophyll variability. Here, we show that the ecosystem response is a complex combination of phytoplankton biomass and physiology that can be described with satellite ocean color diagnostics such as the chlorophyll to carbon biomass ratio (Chl:Cphyto) and chlorophyll fluorescence yield. Together, these quantities outline a more complete picture of ecological response spanning unique signals of iron stress (and relief from), photo acclimation, changes in phytoplankton growth rate, increases in biomass, and timescales of decay for these processes.

Ocean Ecosystem↗

Retrieving Aerosol Characteristics From the PACE Mission, Part 1: Ocean Color Instrument

NASA’s Plankton, Aerosol, Clouds, ocean Ecosystem (PACE) satellite mission is scheduled to launch in 2022, with the Ocean Color Instrument (OCI) on board. For the first time reflected sunlight from the Earth across a broad spectrum from the ultraviolet (UV: 350 nm) to the short wave infrared (SWIR: 2260 nm) will be measured from a single instrument at 1 km spatial resolution. While seven discrete bands will represent the SWIR, the spectrum from 350 to 890 nm will be continuously covered with a spectral resolution of 5 nm. OCI will thus combine in a single instrument (and at an enhanced spatial resolution for the UV) the heritage capabilities of the Moderate resolution Imaging Spectroradiometer (MODIS) and the Ozone Monitoring Instrument (OMI), while covering the oxygen A-band (O2A). Designed for ocean color and ocean biology retrievals, OCI also enables continuation of heritage satellite aerosol products and the development of new aerosol characterization from space. In particular the combination of MODIS and OMI characteristics allows deriving aerosol height, absorption and optical depth along with a measure of particle size distribution. This is achieved by using the traditional MODIS visible-to-SWIR wavelengths to constrain spectral aerosol optical depth and particle size. Extrapolating this information to the UV channels allows retrieval of aerosol absorption and layer height. A more direct method to derive aerosol layer height makes use of O2A absorption methods, despite the relative coarseness of the nominal 5 nm spectral resolution of OCI. Altogether the PACE mission with OCI will be an unprecedented opportunity for aerosol characterization that will continue climate data records from the past decades and propel aerosol science forward toward new opportunities.

PACE↗

Detecting Layer Height of Smoke Aerosols over Vegetated Land and Water Surfaces via Oxygen Absorption Bands: Hourly Results from EPIC/DSCOVR in Deep Space

We present an algorithm for retrieving aerosol layer height (ALH) and aerosol optical depth (AOD) for smoke over vegetated land and water surfaces from measurements of the Earth Polychromatic Imaging Camera (EPIC) onboard the Deep Space Climate Observatory (DSCOVR). The algorithm uses Earth-reflected radiances in six EPIC bands in the visible and near-infrared and incorporates flexible spectral fitting that accounts for specifics of land and water surface reflectivity. The fitting procedure first determines AOD using EPIC atmospheric window bands (443 nm, 551 nm, 680nm, and 780 nm), then uses oxygen (O2) A and B bands (688 nm and 764 nm) to derive ALH, which represents an optical centroid altitude. ALH retrieval over vegetated surface primarily takes advantage of measurements in the O2B band. We applied the algorithm to EPIC observations of several biomass burning events over the United States and Canada in August 2017. We found that the algorithm can be used to obtain AOD and ALH multiple times daily over water and vegetated land surface. Validation is performed against aerosol extinction profiles detected by the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) and against AOD observed at nine Aerosol Robotic Network (AERONET) sites, showing, on average, an error of 0.58 km and a bias of -0.13 km in retrieved ALH and an error of 0.05 and a bias of 0.03 in retrieved AOD. Additionally, we show that the aerosol height information retrieved by the present algorithm can potentially benefit the retrieval of aerosol properties from EPIC’s ultraviolet (UV) bands.

Cloud–Aerosol Lidar with Orthogonal Polarization (↗

Exploring Aerosols Near Clouds With High‐Spatial‐Resolution Aircraft Remote Sensing During SEAC(4)RS

Since aerosols are important to our climate system, we seek to observe the variability of aerosol properties within cloud systems. When applied to the satellite‐borne Moderate‐resolution Imaging Spectroradiometer (MODIS), the Dark Target retrieval algorithm provides global aerosol optical depth (AOD; at 0.55 μm) in cloud‐free scenes. Since MODIS' resolution (500‐m pixels, 3‐ or 10‐km product) is too coarse for studying near‐cloud aerosol, we ported the Dark Target algorithm to the high‐resolution (~50‐m pixels) enhanced‐MODIS Airborne Simulator (eMAS), which flew on the high‐altitude ER‐2 during the Studies of Emissions, Atmospheric Composition, Clouds, and Climate Coupling by Regional Surveys Airborne Science Campaign over the United States in 2013. We find that even with aggressive cloud screening, the ~0.5‐km eMAS retrievals show enhanced AOD, especially within 6 km of a detected cloud. To determine the cause of the enhanced AOD, we analyze additional eMAS products (cloud retrievals and degraded‐resolution AOD), coregistered Cloud Physics Lidar profiles, MODIS aerosol retrievals, and ground‐based Aerosol Robotic Network observations. We also define spatial metrics to indicate local cloud distributions near each retrieval and then separate into near‐cloud and far‐from‐cloud environments. The comparisons show that low cloud masking is robust, and unscreened thin cirrus would have only a small impact on retrieved AOD. Some of the enhancement is consistent with clear‐cloud transition zone microphysics such as aerosol swelling. However, 3‐D radiation interaction between clouds and the surrounding clear air appears to be the primary cause of the high AOD near clouds.

aerosol retrieval algorithm↗