Engineering topics
Lou, Jun
Publications and source records attributed to Lou, Jun.
Cobalt-Modulated Molybdenum–Dinitrogen Interaction in MoS 2 for Catalyzing Ammonia Synthesis
Dinitrogen conversion to ammonia via electrochemical reduction with over 10% Faradaic efficiency is demonstrated in this work. Co-doped MoS 2-x polycrystalline nanosheets with S vacancies as the catalysts are loaded onto carbon cloth by hydrothermal growth from Mo, Co, and S precursors. A sulfur vacancy on the MoS 2-x basal plane mimicking the natural Mo-nitrogenase active site is modified by Co doping and exhibits superior dinitrogen-to-ammonia conversion activity. Density-functional simulation reveals that the free energy barrier, which can be compensated by applied overpotential, is reduced from 1.62 to 0.59 eV after Co doping. Meanwhile, dinitrogen tends to be chemically adsorbed to defective MoS 2-x , which effectively activates the dinitrogen molecule for the dissociation of the N≡N triple bond. Here, this process is further accelerated by Co doping, resulting from the modulation of Mo–N bonding configuration.
High-K dielectric sulfur-selenium alloys
Upcoming advancements in flexible technology require mechanically compliant dielectric materials. Current dielectrics have either high dielectric constant, K (e.g., metal oxides) or good flexibility (e.g., polymers). Here, we achieve a golden mean of these properties and obtain a lightweight, viscoelastic, high-K dielectric material by combining two nonpolar, brittle constituents, namely, sulfur (S) and selenium (Se). This S-Se alloy retains polymer-like mechanical flexibility along with a dielectric strength (40 kV/mm) and a high dielectric constant (K = 74 at 1 MHz) similar to those of established metal oxides. Our theoretical model suggests that the principal reason is the strong dipole moment generated due to the unique structural orientation between S and Se atoms. The S-Se alloys can bridge the chasm between mechanically soft and high-K dielectric materials toward several flexible device applications.
A printed, recyclable, ultra-strong, and ultra-tough graphite structural material
The high mechanical performance of common structural materials (e.g., metals, alloys, and ceramics) originates from strong primary bonds (i.e., metallic, covalent, ionic) between constituent atoms. However, the large formation energy of primary bonds requires high temperatures in order to process these materials, resulting in significant manufacturing costs and a substantial environmental footprint. In this work, we report a strategy to leverage secondary bonds (e.g., hydrogen bonds) to produce a high-performance and low-cost material that outperforms most existing structural compounds. By dispersing graphite flakes and nanofibrillated cellulose (NFC) in water at room temperature to form a stable and homogeneous solution with a high solid concentration (20 wt%), we demonstrate this slurry can be scalably printed to manufacture a graphite-NFC composite that exhibits a high tensile strength (up to 1.0 GPa) and toughness (up to 30.0 MJ/m 3 ). The low density of graphite and cellulose leads to a specific strength of the composite (794 MPa/(g cm -3 )) that is significantly greater than most engineering materials (e.g., steels, aluminum, and titanium alloys). We demonstrate how hydrogen bonds between the graphite flakes and NFC play a pivotal role in the superb mechanical performance of the composite, also enabling this low-cost material to be recyclable for an environmentally sustainable solution to high performance structural materials.
Room-Temperature Magnetic Order in Air-Stable Ultrathin Iron Oxide
Manual assembly of atomically thin materials into heterostructures with desirable electronic properties is an approach that holds great promise. Despite the rapid expansion of the family of ultrathin materials, stackable and stable ferro/ferri magnets that are functional at room temperature are still out of reach. We report the growth of air-stable, transferable ultrathin iron oxide crystals that exhibit magnetic order at room temperature. These crystals require no passivation and can be prepared by scalable and cost-effective chemical vapor deposition. We demonstrate that the bonding between iron oxide and its growth substrate is van der Waals-like, enabling us to remove the crystals from their growth substrate and prepare iron oxide/graphene heterostructures.
Low Contact Barrier in 2H/1T' MoTe 2 In-Plane Heterostructure Synthesized by Chemical Vapor Deposition
Metal–semiconductor contact has been an important topic in the semiconductor industry because it influences device performance remarkably. Conventional metals have served as the major contact material in electronic and optoelectronic devices, but such a selection becomes increasingly inadequate for emerging novel materials such as two-dimensional (2D) materials. Deposited metals on semiconducting 2D channels usually form large resistance contacts due to the high Schottky barrier. A few approaches have been reported to reduce the contact resistance but they are not suitable for large-scale application or they cannot create a clean and sharp interface. Here, a chemical vapor deposition (CVD) technique is introduced to produce large-area semiconducting 2D material (2H MoTe 2 ) planarly contacted by its metallic phase (1T' MoTe 2 ). We demonstrate the phase-controllable synthesis and systematic characterization of large-area MoTe 2 films, including pure 2H phase or 1T' phase, and 2H/1T' in-plane heterostructure. Theoretical simulation reflects a lower Schottky barrier in 2H/1T' junction than in Ti/2H contact, which is confirmed by electrical measurement. This one-step CVD method to synthesize large-area, seamless-bonding 2D lateral metal–semiconductor junction can improve the performance of 2D electronic and optoelectronic devices, paving the way for large-scale 2D integrated circuits.
Understanding and Controlling Toughening Mechanisms in Nanotube Reinforced Ceramic Coatings (Final Report)
Research in this program is designed to understand mechanical behavior, particularly fracture toughness, in ceramics that are reinforced with carbon nanotubes (CNTs). In the past four years, emphasis was placed on: Synthesizing and characterizing ceramic nanocomposite materials reinforced with both multiwall carbon nanotubes (MWNTs) and single wall nanotubes (SWNTs) and implementation and analysis of in situ mechanical testing methods to better understand and engineer the critical CNT/ceramic interfaces.
Composites with carbon nanotubes and graphene: An outlook
Composite materials with carbon nanotube and graphene additives have long been considered as exciting prospects among nanotechnology applications. However, after nearly two decades of work in the area, questions remain about the practical impact of nanotube and graphene composites. This uncertainty stems from factors that include poor load transfer, interfacial engineering, dispersion, and viscosity-related issues that lead to processing challenges in such nanocomposites. Moreover, there has been little effort to identify selection rules for the use of nanotubes or graphene in composite matrices for specific applications. This review is a critical look at the status of composites for developing high-strength, low-density, high-conductivity materials with nanotubes or graphene. An outlook of the different approaches that can lead to practically useful nanotube and graphene composites is presented, pointing out the challenges and opportunities that exist in the field.
Thermally Induced 2D Alloy-Heterostructure Transformation in Quaternary Alloys
Composition and phase specific 2D transition metal dichalogenides (2D TMDs) with a controlled electronic and chemical structure are essential for future electronics. While alloying allows bandgap tunability, heterostructure formation creates atomically sharp electronic junctions. Herein, the formation of lateral heterostructures from quaternary 2D TMD alloys, by thermal annealing, is demonstrated. Phase separation is observed through photoluminescence and Raman spectroscopy, and the sharp interface of the lateral heterostructure is examined via scanning transmission electron microscopy. The composition–dependent transformation is caused by existence of miscibility gap in the quaternary alloys. The phase diagram displaying the miscibility gap is obtained from the reciprocal solution model based on density functional theory and verified experimentally. In conclusion, the experiments show direct evidence of composition–driven heterostructure formation in 2D atomic layer systems.
Aligned-SWCNT film laminated nanocomposites: Role of the film on mechanical and electrical properties
Here in this study, well-aligned single-walled carbon nanotube (SWCNT) films were utilized as lamellae to prepare a multifunctional nanocomposite by a feasible ‘layer-by-layer’ preparation method. This structural design can not only dramatically reduce the agglomeration effect of SWCNTs, but also achieve high in-plane stiffness. It was found that the well-aligned SWCNT films contribute to the high stress-transfer between CNTs and present good wettability with epoxy matrix, thereby improving the mechanical enhancement. Interestingly, this laminated structure possesses distinct electrical behaviors under different loading conditions. The electrical resistance linearly increases with the increase of in-plane tensile strain but is insensitive to bending. This work could provide in-depth understanding on the mechanical and electrical properties of CNT-based laminated nanocomposites.
Mechanically Assisted Self‐Healing of Ultrathin Gold Nanowires
Abstract As the critical feature sizes of integrated circuits approaching sub‐10 nm, ultrathin gold nanowires (diameter <10 nm) have emerged as one of the most promising candidates for next‐generation interconnects in nanoelectronics. Also due to their ultrasmall dimensions, however, the structures and morphologies of ultrathin gold nanowires are more prone to be damaged during practical services, for example, Rayleigh instability can significantly alter their morphologies upon Joule heating, hindering their applications as interconnects. Here, it is shown that upon mechanical perturbations, predamaged, nonuniform ultrathin gold nanowires can quickly recover into uniform diameters and restore their smooth surfaces, via a simple mechanically assisted self‐healing process. By examining the local self‐healing process through in situ high‐resolution transmission electron microscopy, the underlying mechanism is believed to be associated with surface atomic diffusion as evidenced by molecular dynamics simulations. In addition, mechanical manipulation can assist the atoms to overcome the diffusion barriers, as suggested by ab initio calculations, to activate more surface adatoms to diffuse and consequently speed up the self‐healing process. This result can provide a facile method to repair ultrathin metallic nanowires directly in functional devices, and quickly restore their microstructures and morphologies by simple global mechanical perturbations.
Directional sensing based on flexible aligned carbon nanotube film nanocomposites
An aligned SWCNT-film with anisotropic mechanical and electrical properties was utilized to prepare directional sensor.
Understanding and Controlling Toughening Mechanisms in Nanotube Reinforced Ceramic Coatings
Research in this program is designed to understand mechanical behavior, particularly fracture toughness, in ceramics that are reinforced with carbon nanotubes (CNTs). In the past four years, emphasis was placed on: Synthesizing and characterizing ceramic nanocomposite materials reinforced with both multiwall carbon nanotubes (MWNTs) and single wall nanotubes (SWNTs); and Implementation and analysis of in situ mechanical testing methods to better understand and engineer the critical CNT/ceramic interfaces.
Three-dimensional mesostructures as high-temperature growth templates, electronic cellular scaffolds, and self-propelled microrobots
Recent work demonstrates that processes of stress release in prestrained elastomeric substrates can guide the assembly of sophisticated 3D micro/nanostructures in advanced materials. Reported application examples include soft electronic components, tunable electromagnetic and optical devices, vibrational metrology platforms, and other unusual technologies, each enabled by uniquely engineered 3D architectures. A vast disadvantage of these systems is that the elastomeric substrates, while essential to the assembly process, can impose significant engineering constraints in terms of operating temperatures and levels of dimensional stability; they also prevent the realization of 3D structures in freestanding forms. In this work, we introduce concepts in interfacial photopolymerization, nonlinear mechanics, and physical transfer that bypass these limitations. The results enable 3D mesostructures in fully or partially freestanding forms, with additional capabilities in integration onto nearly any class of substrate, from planar, hard inorganic materials to textured, soft biological tissues, all via mechanisms quantitatively described by theoretical modeling. Illustrations of these ideas include their use in 3D structures as frameworks for templated growth of organized lamellae from AgCl–KCl eutectics and of atomic layers of WSe 2 from vapor-phase precursors, as open-architecture electronic scaffolds for formation of dorsal root ganglion (DRG) neural networks, and as catalyst supports for propulsive systems in 3D microswimmers with geometrically controlled dynamics. Taken together, these methodologies establish a set of enabling options in 3D micro/nanomanufacturing that lie outside of the scope of existing alternatives.