Search NASA⌕ Search

Engineering topics

Loveland, W.

Publications and source records attributed to Loveland, W..

At least 19 records

Instrumentation for correlated prompt n – γ emission studies in coincidence with fission fragments

Recent theoretical and experimental results have brought renewed interest and focus on the topic of fission fragment angular momentum. Measurements of neutrons and rays in coincidence with fission fragments remain the most valuable tool in the exploration of fission physics. To achieve these scientific goals, we have developed a system that combines a state-of-the-art fission fragment detector and n – γ radiation detectors. A new twin Frisch-gridded ionization chamber has been designed and constructed for use with a spontaneous fission source and an array of forty trans-stilbene organic scintillators (FS-3) at Argonne National Laboratory. The new ionization chamber design we present in this work aims at minimizing particle attenuation in the chamber walls, and provides a compact apparatus that can be fit inside existing experimental systems. The ionization chamber is capable of measuring fission fragment masses and kinetic energies, whereas the FS-3 provides neutron and γ-ray multiplicities and spectra. Here, the details of both detector assemblies are presented along with the first experimental results of this setup. Planned event-by-event analysis and future experiments are briefly discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Stopping Force Analysis of 235 U Elemental Fission Product Yields for $E_n$ = 0.11–92.4 MeV

We report most evaluated elemental fission product yield distributions are not experimentally measured. Instead, the majority of evaluated distributions are based on analytic expressions of the Zp-model for relevant cumulative yields. Here we report independent elemental fission product yield distributions of a 235 U target for incident neutron energies ranging from 0.11 MeV through 92.4 MeV. Atomic numbers are calculated by an approach that combines a 2E analysis with a stopping force analysis method, developed within this paper. These analyses are applied to more than 6.1 × 10 6 fission fragment ionization tracks captured within the NIFFTE (Neutron Induced Fission Fragment Tracking Experiment) collaboration fission time projection chamber (fissionTPC). A 3-Z resolution was obtained with the fissionTPC spatial and energy resolutions. Tabulated results are presented for the atomic yield and experimentally derived Zp values as a function of pre-neutron-emission fragment masses for the complete range of incident neutron energies. The stopping-force-derived Zp values tend to support the unchanged charge distribution theory within uncertainty.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of the 239 Pu(n,f)/ 235 U(n,f) Cross-Section Ratio with the NIFFTE fission Time Projection Chamber

In this work, the 239 Pu(n,f)/ 235 U(n,f) cross-section ratio has been measured with the fission Time Projection Chamber (fissionTPC) from 100 keV to 100 MeV. The fissionTPC provides three-dimensional reconstruction of fission-fragment ionization profiles, allowing for a precise quantification of measurement uncertainties. The measurement was performed at the Los Alamos Neutron Science Center which provides a pulsed white source of neutrons. The data are recommended to be used as a cross-section ratio shape. A discussion of the status of the absolute normalization and comparisons to ENDF evaluations and previous measurements is included.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of material isotopics and atom number ratio with α-particle spectroscopy for a NIFFTE fission Time Projection Chamber actinide target

In this work, we present the results of a measurement of isotopic concentrations and atomic number ratio of a double-sided actinide target using α-spectroscopy and mass spectrometry. The double-sided actinide target, with predominantly 239 Pu on one side and 235 U on the other, was used in the fission Time Projection Chamber (fissionTPC) for a measurement of the neutron-induced fission cross-section ratio between the two isotopes. The measured atomic number ratio is needed to extract an absolute measurement fission cross-section ratio. The 239 Pu/ 235 U atom number ratio was measured with a combination of mass spectrometry and α-spectroscopy with a planar silicon detector achieving uncertainties of less than 1%. Different strategies for estimating isotopic concentration from the α-spectrum are presented to demonstrate the potential of these methods for non-destructive target assay. We found that a combination of fitting spectra with constraints from mass spectrometry, and summing counts in a region of the spectrum provided the most consistent results with the lowest uncertainty.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Total kinetic energy release in the fast-neutron-induced fission of Np 237

The total kinetic energy (TKE) release in the fast neutron-induced fission of 237Np was measured for neutron energies from En = 2.6–100 MeV at the Los Alamos Neutron Science Center at the Weapons Neutron Research facility. The post-TKE release decreases nonlinearly with increasing incident neutron energy and can be represented as TKE(MeV) = (174.38 ± 0.72) – (5.11 ± 0.5821) log 10 E n for En > 1 MeV. Analysis of the fragment mass distributions indicates that the decrease in TKE with increasing E n is a consequence of the fading out of shell effects at high excitation energies (resulting in an increase of symmetric fission) and the decrease of the total kinetic energy associated with asymmetric fission with increasing E n .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Neutron-induced fission fragment angular distributions, anisotropy, and linear momentum transfer measured with the NIFFTE fission time projection chamber

The Neutron Induced Fission Fragment Tracking Experiment (NIFFTE) collaboration has performed measurements with a fission time projection chamber (fissionTPC) to study the fission process by reconstructing full three-dimensional tracks of fission fragments and other ionizing radiation. The amount of linear momentum imparted to the fissioning nucleus by the incident neutron can be inferred by measuring the opening angle between the fission fragments. Using this measured linear momentum, fission fragment angular distributions can be converted to the center-of-mass frame for anisotropy measurements. Angular anisotropy is an important experimental observable for understanding the quantum mechanical state of the fissioning nucleus and vital to determining detection efficiency for cross section measurements. Neutron linear momentum transfer to fissioning 235 U, 238 U, and 239Pu and fission fragment angular anisotropy of 235 U and 238 U as a function of neutron energies in the range 130 keV–250 MeV are presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The {sup 136}Xe + {sup 198}Pt Reaction: a Detailed Re-examination

We extend previous measurements of the transfer product yields in the reaction of E-c.m. = 450 MeV Xe-136 with Pt-198 by measurements of the product yields using Gammasphere. By recording events occurring in beam bursts and in between beam bursts, we are able to extend the number of measured product yields from 78 to 171 nuclides. Our new data span a much wider range of Z and A than observed in previous work and when compared to theoretical predictions, these new measurements provide a more stringent and thorough test of models of multi-nucleon transfer (MNT) reactions.

Desai, V. V.↗

Multinucleon transfer in the interaction of 977 MeV and 1143 MeV Hg 204 with Pb 208

A previous study of symmetric collisions of massive nuclei has shown that current models of multinucleon transfer (MNT) reactions do not adequately describe the transfer product yields. To gain further insight into this problem, we have measured the yields of MNT products in the interaction of 977 (E/A = 4.79 MeV) and 1143 MeV (E/A = 5.60 MeV) 204 Hg with 208 Pb. We find that the yield of multinucleon transfer products are similar in these two reactions and are substantially lower than those observed in the reaction of 1257 MeV (E/A = 6.16 MeV) 204 Hg+ 198 Pt. We compare our measurements with the predictions of the GRAZING-F, dinuclear systems (DNS), and improved quantum molecular dynamics (ImQMD) models. We report that for the observed isotopes of the elements Au, Hg, Tl, Pb, and Bi, the measured values of the MNT cross sections are orders of magnitude larger than the predicted values. Furthermore, the various models predict the formation of nuclides near the N = 126 shell, which are not observed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Results from Oregon State University 1 MW TRIGA reactor irradiation of uranium-238

We are studying short-lived fission product yields to improve the nuclear databases currently available to the nuclear physics community. There are three general energy groups that are cited in the nuclear databases; thermal neutron spectrum, fission neutron spectrum and mono-energetic 14 MeV. Each neutron energy spectrum produces different fission fragment distributions. The differences between thermal and fission neutron spectrum is several MeV of energy. Thermal represents neutron energies arounds 0.026 eV. Fission neutron spectrum refers to a Watt fission neutron spectrum with a mean energy of approximately 1 MeV. 14 MeV is the result mono-energetic with a small spread in energies (~0.1-0.3 MeV) usually.

42 ENGINEERING↗

Fission fragment angular anisotropy in neutron-induced fission of U 235 measured with a time projection chamber

Fission fragment angular distributions can provide an important constraint on fission theory, improving predictive fission codes, and are a prerequisite for a precise ratio cross section measurement. Available anisotropy data are sparse, especially at neutron energies above 5 MeV. For the first time, a three-dimensional tracking detector is employed to study fragment emission angles and provide a direct measurement of angular anisotropy. The Neutron Induced Fission Fragment Tracking Experiment (NIFFTE) collaboration has deployed the fission time projection chamber to measure nuclear data with unprecedented precision. The fission fragment anisotropy of 235 U has been measured over a wide range of incident neutron energies from 180 keV to 200 MeV; a careful study of the systematic uncertainties complement the data.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

The Xe 136 + Pt 198 reaction: A test of models of multi-nucleon transfer reactions

The yields of 42 projectile-like fragments (PLFs) and fission fragments and 36 target-like fragments (TLFs) were measured using off-line γ-ray spectroscopy in a thin target experiment involving the 136 Xe+ 198 Pt reaction. The center of target beam energy was 760.5 MeV (E c.m. =450 MeV). The reported yields are compared with those from previous measurements for this reaction and with predictions of the GRAZING, di-nuclear systems (DNS), and improved quantum molecular dynamics (ImQMD) models. Here, the yields of the TLFs and PLFs are, in general, substantially smaller than those previously observed at a beam energy of 1085 MeV. Neither the GRAZING nor the DNS model correctly describes the measured TLF and PLF yields in this lower- energy reaction but the ImQMD model describes these yields adequately.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of the normalized U 238 ( n , f ) / U 235 ( n , f ) cross section ratio from threshold to 30 MeV with the NIFFTE fission Time Projection Chamber

We present that the normalized 238 U(n,f)/ 235 U(n,f) cross section ratio has been measured using the NIFFTE fission Time Projection Chamber (fissionTPC) from the reaction threshold to 30 MeV . The fissionTPC is a two-volume MICROMEGAS time projection chamber that allows for full three-dimensional reconstruction of fission-fragment ionization profiles from neutron-induced fission. The measurement was performed at the Los Alamos Neutron Science Center, where the neutron energy is determined from neutron time of-flight. The 238 U(n,f)/ 235 U(n,f) ratio reported here is the first cross section measurement made with the fissionTPC, and will provide new experimental data for evaluation of the 238 U(n,f) cross section, an important standard used in neutron-flux measurements. Use of a development target in this work prevented the determination of an absolute normalization, to be addressed in future measurements. Instead, the measured cross section ratio has been normalized to ENDF/B-VIII.β5 at 14.5 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Survival-mediated capture and fusion cross sections for heavy-element synthesis

The cross section for producing a heavy evaporation residue σ EVR in a fusion reaction can be written as a product of three nonseparable factors, i.e., the capture cross section, the fusion probability P CN , and the survival probability W sur . Each of these factors is dependent on the spin. However, one must remember that the W sur term is zero or very small for higher spin values, thus effectively limiting the capture and fusion terms. For a series of ~287 reactions leading to heavy evaporation residues with Z CN ≤ 110, here we point out the implications of this fact for capture cross sections for heavy element formation reactions. From a comparison of calculated and measured evaporation residue cross sections we deduce values of the fusion probability P CN for some of these reactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Total kinetic energy release in the fast neutron induced fission of 235 U

The total kinetic energy (TKE) release in the fast neutron induced fission of 235 U was measured for neutron energies E$_n$ = 2 - 100 MeV. The TKE distributions are Gaussian in shape. The mean post neutron emission TKE release decreases non-linearly with increasing neutron energy and can be represented as TKE(MeV) = 170.92-3.73774log 10 E n -0.65028(log 10 E n ) 2 . Abrupt changes in the variances of the TKE distributions are observed at the onset of 2nd, 3rd, etc. chance fission. For E n = 20-100 MeV, the variances are approximately constant. These observations are compared to the predictions of the GEF model for neutron-induced fission. This model describes many of the features of the TKE release adequately.

235U(n,f)↗

Performance of a MICROMEGAS-based TPC in a high-energy neutron beam

The MICROMEGAS (MICRO-MEsh GAseous Structure) charge amplification structure has found wide use in many detection applications, especially as a gain stage for the charge readout of Time Projection Chambers (TPCs). We report on the behavior of a MICROMEGAS TPC when operated in a high-energy (up to 800 MeV) neutron beam. It is found that neutron-induced reactions can cause discharges in some drift gas mixtures that are stable in the absence of the neutron beam. The discharges result from recoil ions close to the MICROMEGAS that deposit high specific ionization density and have a limited diffusion time. And for a binary drift gas, increasing the percentage of the molecular component (quench gas) relative to the noble component and operating at lower pressures generally improves stability.

43 PARTICLE ACCELERATORS↗

Modeling multi-nucleon transfer in symmetric collisions of massive nuclei

Symmetric collisions of massive nuclei, such as U-238 + Cm-248, have been proposed as ways to make new n-rich heavy nuclei via multi-nucleon transfer (MNT) reactions. We have measured the yields of several projectile-like and target-like fragments from the reaction of 1360 MeV Hg-204 + Pt-198. We find that current models for this symmetric collision (GRAZING, DNS, ImQMD) significantly underestimate the yields of these transfer products, even for small transfers. (C) 2017 The Author(s). Published by Elsevier B.V.

Welsh, T.↗