Search NASA⌕ Search

Engineering topics

Lu, Di

Publications and source records attributed to Lu, Di.

7 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Ligand-channel-enabled ultrafast Li-ion conduction

Li-ion batteries (LIBs) for electric vehicles and aviation demand high energy density, fast charging and a wide operating temperature range, which are virtually impossible because they require electrolytes to simultaneously have high ionic conductivity, low solvation energy and low melting point and form an anion-derived inorganic interphase. We report guidelines for designing such electrolytes by using small-sized solvents with low solvation energy. The tiny solvent in the secondary solvation sheath pulls out the Li + in the primary solvation sheath to form a fast ion-conduction ligand channel to enhance Li + transport, while the small-sized solvent with low solvation energy also allows the anion to enter the first Li + solvation shell to form an inorganic-rich interphase. The electrolyte-design concept is demonstrated by using fluoroacetonitrile (FAN) solvent. The electrolyte of 1.3 M lithium bis(fluorosulfonyl)imide (LiFSI) in FAN exhibits ultrahigh ionic conductivity of 40.3 mS cm -1 at 25 °C and 11.9 mS cm -1 even at -70 °C, thus enabling 4.5-V graphite||LiNi 0.8 Mn 0.1 Co 0.1 O 2 pouch cells (1.2 Ah, 2.85 mAh cm -2 ) to achieve high reversibility (0.62 Ah) when the cells are charged and discharged even at -65 °C. The electrolyte with small-sized solvents enables LIBs to simultaneously achieve high energy density, fast charging and a wide operating temperature range, which is unattainable for the current electrolyte design but is highly desired for extreme LIBs. This mechanism is generalizable and can be expanded to other metal-ion battery electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2023

Delamination-Assisted Ultrafast Wrinkle Formation in a Freestanding Film

Freestanding films provide a versatile platform for materials engineering thanks to additional structural motifs not found in films with a substrate. A ubiquitous example is wrinkles, yet little is known about how they can develop over as fast as a few picoseconds due to a lack of experimental probes to visualize their dynamics in real time on the nanoscopic scale. Here, we use time-resolved electron diffraction to directly observe light-activated wrinkling formation in freestanding La 2/3 Ca 1/3 MnO 3 films. Via a “lock-in” analysis of oscillations in the diffraction peak position, intensity, and width, we quantitatively reconstructed how wrinkles develop on the time scale of lattice vibration. Contrary to the common assumption of fixed boundary conditions, we found that wrinkle development is associated with ultrafast delamination at the film boundaries. Finally, our work provides a generic protocol to quantify wrinkling dynamics in freestanding films and highlights the importance of the film–substrate interaction in determining the properties of freestanding structures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Large Spin-Orbit-Torque Efficiency and Room-Temperature Magnetization Switching in Sr Ir O 3 / Co-Fe-B Heterostructures

Spin-orbit-torque (SOT) switching is a potentially energy-efficient mechanism by which electrical current can control magnetization. We demonstrate room-temperature SOT switching in nanometer-thick Co⁢Fe⁢B/Sr⁢Ir⁢O 3 bilayers despite the amorphous nature of CoFeB and the interface. This behavior is attributed to the large spin Hall angle in Sr⁢Ir⁢O 3 as well as high spin transmission at the interface that contribute to the SOT efficiency ξ SOT . Our bilayers exhibit large ξ SOT of up to 1.4 and effective spin Hall conductivity of 0.9 ×10 5 (ℏ/2e)Ω –1 ⁢m –1 . In our bilayers, we observe unidirectional magnetoresistance and current-induced magnetization switching with a low critical current density of 1.38 ×10 10 A/m 2 at room temperature. Finally, our results are promising for heterostructures combining technologically relevant CoFeB with high spin-orbit-coupling oxides.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Charge order textures induced by non-linear couplings in a half-doped manganite

Abstract The self-organization of strongly interacting electrons into superlattice structures underlies the properties of many quantum materials. How these electrons arrange within the superlattice dictates what symmetries are broken and what ground states are stabilized. Here we show that cryogenic scanning transmission electron microscopy (cryo-STEM) enables direct mapping of local symmetries and order at the intra-unit-cell level in the model charge-ordered system Nd 1/2 Sr 1/2 MnO 3 . In addition to imaging the prototypical site-centered charge order, we discover the nanoscale coexistence of an exotic intermediate state which mixes site and bond order and breaks inversion symmetry. We further show that nonlinear coupling of distinct lattice modes controls the selection between competing ground states. The results demonstrate the importance of lattice coupling for understanding and manipulating the character of electronic self-organization and that cryo-STEM can reveal local order in strongly correlated systems at the atomic scale.

42 ENGINEERING↗
DOE OSTI2021

Strain Gradient Elasticity in SrTiO 3 Membranes: Bending versus Stretching

Young’s modulus determines the mechanical loads required to elastically stretch a material and also the loads required to bend it, given that bending stretches one surface while compressing the opposite one. Flexoelectric materials have the additional property of becoming electrically polarized when bent. The associated energy cost can additionally contribute to elasticity via strain gradients, particularly at small length scales where they are geometrically enhanced. Here, we present nanomechanical measurements of freely suspended SrTiO 3 crystalline membrane drumheads. In this work, we observe an unexpected nonmonotonic thickness dependence of Young’s modulus upon small deflections. Furthermore, the modulus inferred from a predominantly bending deformation is three times larger than that of a predominantly stretching deformation for membranes thinner than 20 nm. In this regime we extract a strain gradient elastic coupling of ~2.2 μN, which could be used in new operational regimes of nanoelectro-mechanics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Extreme tensile strain states in La 0.7 Ca 0.3 MnO 3 membranes

A defining feature of emergent phenomena in complex oxides is the competition and cooperation between ground states. In manganites, the balance between metallic and insulating phases can be tuned by the lattice; extending the range of lattice control would enhance the ability to access other phases. We stabilized uniform extreme tensile strain in nanoscale La 0.7 Ca 0.3 MnO 3 membranes, exceeding 8% uniaxially and 5% biaxially. Uniaxial and biaxial strain suppresses the ferromagnetic metal at distinctly different strain values, inducing an insulator that can be extinguished by a magnetic field. Electronic structure calculations indicate that the insulator consists of charge-ordered Mn 4+ and Mn 3+ with staggered strain-enhanced Jahn-Teller distortions within the plane. This highly tunable strained membrane approach provides a broad opportunity to design and manipulate correlated electron states.

36 MATERIALS SCIENCE↗