Search NASA⌕ Search

Engineering topics

Lu, Fang

Publications and source records attributed to Lu, Fang.

Template-Assisted Growth of High-Quality α-Phase FAPbI 3 Crystals in Perovskite Solar Cells Using Thiol-Functionalized MoS 2 Nanosheets

Formamidinium lead iodide (FAPI) has gained attention for hybrid perovskite solar cell (PSC) applications due to its enhanced stability and narrow bandgap. However, a significant challenge remains in inducing and stabilizing the elusive perovskite “black phase”—photoactive cubic α-FAPI—as the relatively bulky FA + cations tend to favor the thermodynamically stable nonphotoactive “yellow phase”. Here, in this study, we present a templated growth strategy employing thiol-functionalized MoS 2 nanosheets as templates. By introduction of 3-mercaptopropionic acid (MPA)-functionalized MoS 2 as a growth template, precise control over crystal formation was achieved, favoring the growth of high-quality α-FAPI films. These advanced templated films exhibited substantial improvements in charge transport properties, efficient light absorption, and enhanced charge extraction. As a result, the PSCs achieved a significantly enhanced power conversion efficiency (PCE) compared to the nontemplated control device, increasing from 20.6 to 22.5%. The MoS 2 -incorporated device also demonstrated excellent shelf stability, maintaining 91% of the initial PCE even after 1600 h of storage without device encapsulation.

36 MATERIALS SCIENCE↗

Glycerol Electrooxidation over Precision-Synthesized Gold Nanocrystals with Different Surface Facets

Electrochemical glycerol oxidation (EGO) emerges as a promising route to valorize glycerol, an underutilized byproduct from biodiesel production, into value-added chemicals. This study employed three types of gold (Au) nanocrystals with controlled shapes to elucidate the facet-dependent electrocatalytic behavior in EGO. Octahedral, rhombic dodecahedral, and cubic Au nanocrystals with {111}, {110}, and {100} facets, respectively, were precisely synthesized with uniform size and shape. Rhombic dodecahedra exhibited the lowest onset potential for EGO due to facile AuOH formation, while octahedra showed enhanced electrochemical activity for glycerol oxidation and resistance to poisoning. In-situ FTIR analysis revealed that Au {111} surfaces selectively favored C 2 products, whereas Au {100} surfaces promoted C 3 product formation, highlighting the significant effect of facet orientation on EGO performance and informing catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Regulating phase behavior of nanoparticle assemblies through engineering of DNA-mediated isotropic interactions

Self-assembly of isotropically interacting particles into desired crystal structures could allow for creating designed functional materials via simple synthetic means. However, the ability to use isotropic particles to assemble different crystal types remains challenging, especially for generating low-coordinated crystal structures. Here, we demonstrate that isotropic pairwise interparticle interactions can be rationally tuned through the design of DNA shells in a range that allows transition from common, high-coordinated FCC-CuAu and BCC-CsCl lattices, to more exotic symmetries for spherical particles such as the SC-NaCl lattice and to low-coordinated crystal structures (i.e., cubic diamond, open honeycomb). The combination of computational and experimental approaches reveals such a design strategy using DNA-functionalized nanoparticles and successfully demonstrates the realization of BCC-CsCl, SC-NaCl, and a weakly ordered cubic diamond phase. The study reveals the phase behavior of isotropic nanoparticles for DNA–shell tunable interaction, which, due to the ease of synthesis is promising for the practical realization of non-close-packed lattices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Cobalt Oxide-Coated Single Crystalline Bismuth Vanadate Photoanodes for Efficient Photoelectrochemical Chlorine Generation

Bismuth vanadate (BiVO 4 ) is an outstanding photoanode material for photoelectrochemical water splitting. Here in this work, a series of single crystalline BiVO 4 photoanodes are synthesized by pulsed laser deposition (PLD). Once coated with a thin layer of cobalt oxide (CoO x ) cocatalyst, also by PLD, the photoanodes support efficient photoelectrochemical generation of chlorine (Cl 2 ) from brine under simulated solar light. The activity of the chlorine generation reaction (ClER) is optimized when the thickness of CoO x is about 3 nm, with the faradic efficiency of ClER exceeding 60%. Detailed studies show that the CoO x cocatalyst layer is amorphous, uniform in thickness, and chemically robust. As such, the cocatalyst also effectively protects the underlying BiVO 4 photoanodes against chlorine corrosion. This work provides insights into using artificial photosynthesis for byproducts that carry significant economic value while avoiding the energetically expensive oxygen evolution reactions.

36 MATERIALS SCIENCE↗

Unusual packing of soft-shelled nanocubes

Space-filling generally governs hard particle packing and the resulting phases and interparticle orientations. Contrastingly, hard-shaped nanoparticles with grafted soft-ligands pack differently since the energetically interacting soft-shell is amenable to nanoscale sculpturing. While the interplay between the shape and soft-shell can lead to unforeseen packing effects, little is known about the underlying physics. Here, using electron microscopy and small-angle x-ray scattering, we demonstrate that nanoscale cubes with soft, grafted DNA shells exhibit remarkable packing, distinguished by orientational symmetry breaking of cubes relative to the unit cell vectors. This zigzag arrangement occurs in flat body-centered tetragonal and body-centered cubic phases. We ascribe this unique arrangement to the interplay between shape and a spatially anisotropic shell resulting from preferential grafting of ligands to regions of high curvature. These observations reveal the decisive role played by shell-modulated anisotropy in nanoscale packing and suggest a plethora of new spatial organizations for molecularly decorated shaped nanoparticles.

36 MATERIALS SCIENCE↗

Platinum Monolayer Electrocatalysts for Methanol Oxidation

The direct methanol oxidation fuel cell (DMFC) yields great promise as a power source. It reached that stage as a result of extraordinary contributions of Shimshon Gottesfeld, whom we are honoring by this issue of JES. We briefly comment on his main contributions and, in this context, we present new catalysts for methanol oxidation. They comprise a platinum monolayer (Pt ML ) under tensile strain that produce a large enhancement in the catalytic activity. Pt ML /Au(111), where Pt ML is stretched by over 4%, displayed a significantly enhanced activity. The tensile strain induced by Au(100) has a similar effect. In situ IRRAS study showed the oxidation of COH ads to CO 2 . CO ads was not formed, which is a major breakthrough in methanol electrocatalysis. We synthesized Au Octahedra nanocrystals (NCs) enclosed with Au{111} facets and placed a Pt ML on them. This catalyst indicates a potential for practical application. Further improvements were achieved using Ru nanoclusters as co-catalyst. In another class of nanocatalysts, core-shell PdAuM (M = Co, Fe, Ni) nanoparticles served as substrates for Pt ML . Besides enhanced activity, a cost reduction is achieved. Incorporated in DMFC optimized by Shimshon Gottesfeld and his coworkers these catalysts may facilitate a long-awaited application of this power source.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controllable corrosion-assisted fabrication of Au–Ag alloyed hollow nanocrystals for highly efficient and environmentally-stable SERS substrates

Surface enhanced Raman scattering (SERS) substrates with both high activity and long term chemical-stability have been expected in the practical application of the SERS-based detection. In this paper, Au–Ag bimetal nanocrystals are fabricated based on the template-etching reaction in the Ag nanocubes-contained cetylpyridinium chloride (CPC) aqueous solution via adding the HAuCl 4 solution. The obtained nanocrystals are Au–Ag alloyed and hollow in structure. Further, it has been found that with the increasing Au/Ag molar ratio, the shape of the alloyed nanocrystals evolve from the truncated nanocubes to the hollow boxes and then nanocages, showing the ever red-shifting surface plasmon resonance from the visible to the infrared region. The formation of the alloyed hollow nanocrystals is attributed to the preferential dissolution of the Ag nanocubes induced by CPC selective adsorption and the three to one galvanic replacement reaction between Ag and Au atoms. Importantly, such Au–Ag alloyed hollow nanocrystals, especially the ones with a low Au/Ag atomic ratio, show both high SERS activity and long term environmental stability compared with pure Ag or Au nanocrystals, and are the ideal candidate for the SERS substrate with practical application value. As a result, this work not only demonstrates the nanofabrication route to the alloyed hollow nanocrystals with controllable shapes and tunable optical properties in a large region, but also presents highly active and chemically-stable SERS substrates for the practical SERS-based detection.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Oxygen Reduction on Gold Nanocrystal Surfaces in Alkaline Electrolyte: Evidence for Surface Proton Transfer Effects

Four-electron oxygen reduction reaction (4e-ORR) pathway, as a key high-performance reaction pathway in energy conversion, has been sought after in numerous investigations on metal surfaces over the last decades. Although the surfaces of the most noble metals, including platinum and palladium, demonstrate the fullpotential- range 4e-ORR, this is not the case, for gold (Au) surfaces. The 4e-ORR is only operative on Au surfaces with {100} subfacets, e.g. Au(100), in alkaline solution, however restricted to a certain potential region at low overpotentials, while reverting to a 2e-ORR at high overpotentials. This ORR on Au(100) has been a long-standing puzzle of electrocatalysis. Hereby we review the ORR studies on Au, along with the studies of water effects on Au catalysts, and present our electrochemical results with monofacet Au nanocrystals. Finally, combining with theoretical calculations we demonstrate that surface proton transfer from co-adsorbed water plays the key role in determining the ORR mechanism on Au surfaces in base.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rational assembly of nanoparticle superlattices with designed lattice symmetries

A method for lattice design via multivalent linkers (LDML) is disclosed that introduces a rationally designed symmetry of connections between particles in order to achieve control over the morphology of their assembly. The method affords the inclusion of different programmable interactions within one linker that allow an assembly of different types of particles. The designed symmetry of connections is preferably provided utilizing DNA encoding. The linkers may include fabricated "patchy" particles, DNA scaffold constructs and Y-shaped DNA linkers, anisotropic particles, which are preferably functionalized with DNA, multimeric protein-DNA complexes, and particles with finite numbers of DNA linkers.

59 BASIC BIOLOGICAL SCIENCES↗

Surface Proton Transfer Promotes Four-Electron Oxygen Reduction on Gold Nanocrystal Surfaces in Alkaline Solution

Four-electron oxygen reduction reaction (4e-ORR), as a key pathway in energy conversion, is preferred over the two-electron reduction pathway that falls short in dissociating dioxygen molecules. Gold (Au) surfaces exhibit high sensitivity of the ORR pathway to its atomic structures. The long-standing puzzle remains unsolved why the Au surfaces with {100} sub-facets were exceptionally capable to catalyze the 4e-ORR in alkaline solution, though limited within a narrow potential window. Herein we report the discovery of a dominant 4e-ORR over the whole potential range on {310} surface of Au nanocrystal shaped as truncated ditetragonal prism (TDP). In contrast, ORR pathways on single-crystalline facets of shaped nanoparticles, including {111} on nano-octahedra and {100} on nano-cubes, are similar to their single-crystal counterparts. Combining our experimental results with density functional theory calculations, we elucidate the key role of surface proton transfers from co-adsorbed H 2 O molecules in activating the facet- and potential-dependent 4e ORR on Au in alkaline solutions. These results elucidate how surface atomic structures determine the reaction pathways via bond scission and formation among weakly adsorbed water and reaction intermediates. The new insight helps in developing facet-specific nanocatalysts for various reactions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

3D liver segmentation using multiple region appearances and graph cuts

Purpose: Efficient and accurate 3D liver segmentations from contrast-enhanced computed tomography (CT) images play an important role in therapeutic strategies for hepatic diseases. However, inhomogeneous appearances, ambiguous boundaries, and large variance in shape often make it a challenging task. The existence of liver abnormalities poses further difficulty. Despite the significant intensity difference, liver tumors should be segmented as part of the liver. This study aims to address these challenges, especially when the target livers contain subregions with distinct appearances. Methods: The authors propose a novel multiregion-appearance based approach with graph cuts to delineate the liver surface. For livers with multiple subregions, a geodesic distance based appearance selection scheme is introduced to utilize proper appearance constraint for each subregion. A special case of the proposed method, which uses only one appearance constraint to segment the liver, is also presented. The segmentation process is modeled with energy functions incorporating both boundary and region information. Rather than a simple fixed combination, an adaptive balancing weight is introduced and learned from training sets. The proposed method only calls initialization inside the liver surface. No additional constraints from user interaction are utilized. Results: The proposed method was validated on 50 3D CT images from three datasets, i.e., Medical Image Computing and Computer Assisted Intervention (MICCAI) training and testing set, and local dataset. On MICCAI testing set, the proposed method achieved a total score of 83.4 ± 3.1, outperforming nonexpert manual segmentation (average score of 75.0). When applying their method to MICCAI training set and local dataset, it yielded a mean Dice similarity coefficient (DSC) of 97.7% ± 0.5% and 97.5% ± 0.4%, respectively. These results demonstrated the accuracy of the method when applied to different computed tomography (CT) datasets. In addition, user operator variability experiments showed its good reproducibility. Conclusions: A multiregion-appearance based method is proposed and evaluated to segment liver. This approach does not require prior model construction and so eliminates the burdens associated with model construction and matching. The proposed method provides comparable results with state-of-the-art methods. Validation results suggest that it may be suitable for the clinical use.

60 APPLIED LIFE SCIENCES↗

Superlattices assembled through shape-induced directional binding

Organization of spherical particles into lattices is typically driven by packing considerations. Although the addition of directional binding can significantly broaden structural diversity, nanoscale implementation remains challenging. Here we investigate the assembly of clusters and lattices in which anisotropic polyhedral blocks coordinate isotropic spherical nanoparticles via shape-induced directional interactions facilitated by DNA recognition. We show that these polyhedral blocks—cubes and octahedrons—when mixed with spheres, promote the assembly of clusters with architecture determined by polyhedron symmetry. Moreover, three-dimensional binary superlattices are formed when DNA shells accommodate the shape disparity between nanoparticle interfaces. The crystallographic symmetry of assembled lattices is determined by the spatial symmetry of the block’s facets, while structural order depends on DNA-tuned interactions and particle size ratio. Lastly, the presented lattice assembly strategy, exploiting shape for defining the global structure and DNA-mediation locally, opens novel possibilities for by-design fabrication of binary lattices.

59 BASIC BIOLOGICAL SCIENCES↗