Search NASA⌕ Search

Engineering topics

Lu, Jun

Publications and source records attributed to Lu, Jun.

At least 235 records · Page 13

Commercialization of Lithium Battery Technologies for Electric Vehicles

We present that the currently commercialized lithium-ion batteries have allowed for the creation of practical electric vehicles, simultaneously satisfying many stringent milestones in energy density, lifetime, safety, power, and cost requirements of the electric vehicle economy. The next wave of consumer electric vehicles is just around the corner. Although widely adopted in the vehicle market, lithium-ion batteries still require further development to sustain their dominating roles among competitors. In this review, the authors survey the state-of-the-art active electrode materials and cell chemistries for automotive batteries. The performance, production, and cost are included. The advances and challenges in the lithium-ion battery economy from the material design to the cell and the battery packs fitting the rapid developing automotive market are discussed in detail. Additionally, new technologies of promising battery chemistries are comprehensively evaluated for their potential to satisfy the targets of future electric vehicles.

25 ENERGY STORAGE↗

In Situ Engineering of Intracellular Hemoglobin for Implantable High-Performance Biofuel Cells

The key challenge for the broad application of implantable biofuel cells (BFCs) is to achieve inorganic–organic composite biocompatibility while improving the activity and selectivity of the catalysts. We have fabricated nanoengineered red blood cells (NERBCs) by an environmentally friendly method by using red blood cells as the raw material and hemoglobin (Hb) embedded with ultrasmall hydroxyapatite (HAP, Ca 10 (PO 4 ) 6 (OH) 2 ) as the functional BFC cathode material. The NERBCs showed greatly enhanced cell performance with high electrocatalytic activity, stability, and selectivity. The NERBCs maintained the original biological properties of the natural cell, while enhancing the catalytic oxygen reduction reaction (ORR) through the interaction between -OH groups in HAP and the Hb in RBCs. Finally, they also enabled direct electron transportation, eliminating the need for an electron-transfer mediator, and showed catalytic inactivity for glucose oxidation, thus potentially enabling the development of separator-free BFCs.

09 BIOMASS FUELS↗

Oxygen Release Degradation in Li–Ion Battery Cathode Materials: Mechanisms and Mitigating Approaches

Widespread application of Li–ion batteries (LIBs) in large–scale transportation and grid storage systems requires highly stable and safe performance of the batteries in prolonged and diverse service conditions. Oxygen release from oxygen–containing positive electrode materials is one of the major structural degradations resulting in rapid capacity/voltage fading of the battery and triggering the parasitic thermal runaway events. Herein, the authors summarize the recent progress in understanding the mechanisms of the oxygen release phenomena and correlative structural degradations observed in four major groups of cathode materials: layered, spinel, olivine, and Li–rich cathodes. In addition, the engineering and materials design approaches that improve the structural integrity of the cathode materials and minimize the detrimental O 2 evolution reaction are summarized. As a result, the authors believe that this review can guide researchers on developing mitigation strategies for the design of next–generation oxygen–containing cathode materials where the oxygen release is no longer a major degradation issue.

25 ENERGY STORAGE↗

Sustainability-inspired cell design for a fully recyclable sodium ion battery

Large-scale applications of rechargeable batteries consume nonrenewable resources and produce massive amounts of end-of-life wastes, which raise sustainability concerns in terms of manufacturing, environmental, and ecological costs. Therefore, the recyclability and sustainability of a battery should be considered at the design stage by using naturally abundant resources and recyclable battery technology. Herein, we design a fully recyclable rechargeable sodium ion battery with bipolar electrode structure using Na 3 V 2 (PO 4 ) 3 as an electrode material and aluminum foil as the shared current collector. Such a design allows exceptional sodium ion battery performance in terms of high-power correspondence and long-term stability and enables the recycling of ~ 100% Na 3 V 2 (PO 4 ) 3 and ~ 99.1% elemental aluminum without the release of toxic wastes, resulting in a solid-component recycling efficiency of >98.0%. The successful incorporation of sustainability into battery design implies that closed-loop recycling and the reutilization of battery materials can be achieved in next-generation energy storage technologies.

25 ENERGY STORAGE↗

Electrochemically primed functional redox mediator generator from the decomposition of solid state electrolyte

Recent works into sulfide-type solid electrolyte materials have attracted much attention among the battery community. Specifically, the oxidative decomposition of phosphorus and sulfur based solid state electrolyte has been considered one of the main hurdles towards practical application. Here we demonstrate that this phenomenon can be leveraged when lithium thiophosphate is applied as an electrochemically "switched-on" functional redox mediator-generator for the activation of commercial bulk lithium sulfide at up to 70 wt.% lithium sulfide electrode content. X-ray adsorption near-edge spectroscopy coupled with electrochemical impedance spectroscopy and Raman indicate a catalytic effect of generated redox mediators on the first charge of lithium sulfide. In contrast to pre-solvated redox mediator species, this design decouples the lithium sulfide activation process from the constraints of low electrolyte content cell operation stemming from pre-solvated redox mediators. Reasonable performance is demonstrated at strict testing conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Conductivity and lithiophilicity gradients guide lithium deposition to mitigate short circuits

Lithium metal anodes hold great promise to enable high-energy battery systems. However, lithium dendrites at the interface between anode and separator pose risks of short circuits and fire, impeding the safe application. In contrast to conventional approaches of suppressing dendrites, here we show a deposition-regulating strategy by electrically passivating the top of a porous nickel scaffold and chemically activating the bottom of the scaffold to form conductivity/lithiophilicity gradients, whereby lithium is guided to deposit preferentially at the bottom of the anode, safely away from the separator. The resulting lithium anodes significantly reduce the probability of dendrite-induced short circuits. Crucially, excellent properties are also demonstrated at extremely high capacity (up to 40 mAh cm –2 ), high current density, and/or low temperatures (down to –15 °C), which readily induce dendrite shorts in particular. This facile and viable deposition-regulating strategy provides an approach to preferentially deposit lithium in safer positions, enabling a promising anode for next-generation lithium batteries.

25 ENERGY STORAGE↗

Anti-Oxygen Leaking LiCoO 2

LiCoO 2 is a great example of widely used cathodes that suffer from the structural/thermal instability issues that lead to the release of their lattice oxygen under nonequilibrium conditions and safety concerns in Li-ion batteries. In this work, it is shown that an atomically thin layer of reduced graphene oxide can suppress oxygen release from LixCoO 2 particles and improve their structural stability. Electrochemical cycling, differential electrochemical mass spectroscopy, differential scanning calorimetry, and in situ heating transmission electron microscopy are performed to characterize the effectiveness of the graphene-coating on the abusive tolerance of LixCoO 2 . Electrochemical cycling mass spectroscopy results suggest that oxygen release is hindered at high cutoff voltage cycling when the cathode is coated with reduced graphene oxide. Thermal analysis, in situ heating transmission electron microscopy, and electron energy loss spectroscopy results show that the reduction of Co species from the graphene-coated samples is delayed when compared with bare cathodes. Lastly, density functional theory and ab initio molecular dynamics calculations reflect that the rGO layers could suppress O 2 formation more effectively due to the strong C—O cathode bond formation at the interface of rGO/LCO where low coordination oxygens exist. This investigation uncovers a reliable approach for hindering the oxygen release reaction and improving the thermal stability of battery cathodes.

25 ENERGY STORAGE↗

Real-Time TEM Study of Nanopore Evolution in Battery Materials and Their Suppression for Enhanced Cycling Performance

Battery materials, which store energy by combining mechanisms of intercalation, conversion, and alloying, give promisingly high energy density but usually suffer from fast capacity decay due to the drastic volume change upon cycling. Particularly, the significant volume shrinkage upon mass (Li + , Na + , etc.) extraction inevitably leads to the formation of pores in materials and their final pulverization after cycling. It is necessary to explore the failure mechanism of such battery materials from the microscopic level in order to understand the evolution of porous structures. In this work, prototyped Sb 2 Se 3 nanowires are targeted to understand the structural failures during repetitive (de)sodiation, which exhibits mainly alloying and conversion mechanisms. The fast growing nanosized pores embedded in the nanowire during desodiation are identified to be the key factor that weakens the mechanical strength of the material and thus cause a rapid capacity decrease. To suppress the pore development, we further limit the cutoff charge voltage in a half-cell against Na below a critical value where the conversion reaction of such a material system is yet happening, the result of which demonstrates significantly improved battery performance with well-maintained structural integrity. These results may shed some light on electrode failure investigation and rational design of advanced electrode materials with long cycling life.

25 ENERGY STORAGE↗

Magnetic Field-Suppressed Lithium Dendrite Growth for Stable Lithium-Metal Batteries

Lithium metal is the most attractive anode material due to its extremely high specific capacity, minimum potential, and low density. However, uncontrollable growth of lithium dendrite results in severe safety and cycling stability concerns, which hinders the application in next generation secondary batteries. In this paper, a new and facile method imposing a magnetic field to lithium metal anodes is proposed. That is, the lithium ions suffering Lorentz force due to the electromagnetic fields are put into spiral motion causing magnetohydrodynamics (MHD) effect. This MHD effect can effectively promote mass transfer and uniform distribution of lithium ions to suppress the dendrite growth as well as obtain uniform and compact lithium deposition. The results show that the lithium metal electrodes within the magnetic field exhibit excellent cycling and rate performance in a symmetrical battery. Additionally, full batteries using limited lithium metal as anodes and commercial LiFePO 4 as cathodes show improved performance within the magnetic field. In summary, a new and facile strategy of suppressing lithium dendrites using the MHD effect by imposing a magnetic field is proposed, which may be generalized to other advanced alkali metal batteries.

25 ENERGY STORAGE↗

Encapsulating phosphorus inside carbon nanotubes via a solution approach for advanced lithium ion host

Conventional phosphorus anode materials in lithium/sodium-ion batteries are mainly based on the physical mixing and evaporation/condensation, in which external phosphorus on conductive matrix is unavoidable and hard to be removed due to the formation of crystalline phase. It has been found to break off from conductive matrix easily and deteriorate capacity rapidly. In this communication, we first report a solution processed encapsulation method which facilitates phosphorus anchored inside multi-walled carbon nanotubes (MWCNTs). Any possible external phosphorus adsorbents are hard to transform into crystalline and enable an easy removal by polar solvents. Eventually, the phosphorus rings and chains are successfully encapsulated only inside MWCNTs, exhibiting high cycling stability in lithium-ion battery because of the efficient physical confinement and unique discrete phosphorus segment assemblies inside MWCNTs which ensured enough vacant space for volume expansion.

25 ENERGY STORAGE↗

Simultaneously Dual Modification of Ni-Rich Layered Oxide Cathode for High-Energy Lithium-Ion Batteries

A critical challenge in the commercialization of layer-structured Ni-rich materials is the fast capacity drop and voltage fading due to the interfacial instability and bulk structural degradation of the cathodes during battery operation. Herein, with the guidance of theoretical calculations of migration energy difference between La and Ti from the surface to the inside of LiNi 0.8 Co 0.1 Mn 0.1 O 2 , for the first time, Ti-doped and La 4 NiLiO 8 -coated LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathodes are rationally designed and prepared, via a simple and convenient dual-modification strategy of synchronous synthesis and in situ modification. Impressively, the dual modified materials show remarkably improved electrochemical performance and largely suppressed voltage fading, even under exertive operational conditions at elevated temperature and under extended cutoff voltage. Further studies reveal that the nanoscale structural degradation on material surfaces and the appearance of intergranular cracks associated with the inconsistent evolution of structural degradation at the particle level can be effectively suppressed by the synergetic effect of the conductive La 4 NiLiO 8 coating layer and the strong Ti—O bond. The present work demonstrates that our strategy can simultaneously address the two issues with respect to interfacial instability and bulk structural degradation, and it represents a significant progress in the development of advanced cathode materials for high-performance lithium-ion batteries.

36 MATERIALS SCIENCE↗

Reverse Dual-Ion Battery via a ZnCl 2 Water-in-Salt Electrolyte

Dual-ion batteries are known for anion storage in the cathode coupled to cation incorporation in the anode. We flip the sequence of the anion/cation-storage chemistries of the anode and the cathode in dual-ion batteries (DIBs) by allowing the anode to take in anions and a cation-deficient cathode to host cations, thus operating as a reverse dual-ion battery (RDIB). The anion-insertion anode is a nano-composite having ferrocene encapsulated inside a micro-porous carbon, and the cathode is a Zn-insertion Prussian blue, Zn-3[Fe(CN)(6)](2). This unique battery configuration benefits from the usage of a 30 m ZnCl2 "water-in-salt" electrolyte. This electrolyte minimizes the dissolution of ferrocene; it raises the cation-insertion potential in the cathode, and it depresses the anion-insertion potential in the anode, thus widening the full cell's voltage by 0.35 V compared with a dilute ZnCl2 electrolyte. RDIBs provide a configuration-based solution to exploit the practicality of cation-deficient cathode materials in aqueous electrolytes.

25 ENERGY STORAGE↗

Sacrificial template synthesis of hollow C@MoS 2 @PPy nanocomposites as anodes for enhanced sodium storage performance

Molybdenum disulfide (MoS 2 ) has become a potential anode material for sodium-ion batteries (SIBs) by showing decent cell performance but it suffers poor electronic conductivity and large volume expansion during sodiation. Here we design a nanocomposite with hollow nitrogen doped carbon and polypyrrole modified MoS 2 for improving the performance for SIBs. The designed nanocomposite shows a much-improved electronic conductivity and the design of the architecture provides sufficient channels for mass transport and accommodates large volume change. This C@MoS 2 @PPy anode delivers a high specific capacity of 713 mAh g -1 at 0.1 A g -1 for 100 cycles, and an excellent rate capacity of 294 mAh g -1 at 5 A g -1 for 500 cycles. This specific architecture of C@MoS2@PPy could guide the future design of the electrode material in SIBs and its superior electrochemical performance indicates the great potential application for SIBs.

25 ENERGY STORAGE↗

Vanadium Oxide Pillared by Interlayer Mg 2+ Ions and Water as Ultralong-Life Cathodes for Magnesium-Ion Batteries

Magnesium-ion batteries (MIBs) show great potential for large-scale energy storage because of the advantages of low cost and safety, but their application is severely hindered by the difficulty in finding desirable electrode materials. In this work, we develop a bilayer-structured vanadium oxide (Mg 0.3 V 2 O 5 ·1.1H 2 O) with synergistic effect of Mg 2+ ions and lattice water as the cathode material for MIBs. The pre-intercalated Mg 2+ ions provide high electronic conductivity and excellent structural stability. The lattice water enables fast Mg 2+ ions mobility because of its charge shielding effect. As a result, the Mg 0.3 V 2 O 5 ·1.1H 2 O exhibits excellent rate performance and an unprecedented cycling life with capacity retention of 80.0% after 10,000 cycles. Furthermore, the Mg 0.3 V 2 O 5 ·1.1H 2 O exhibits good electrochemical performance in full MIBs. This scalable Mg 2+ host material is an enticing candidate as a cathode for MIBs, and its high performance is expected to meet the requirements for large-scale storage applications.

25 ENERGY STORAGE↗

An Aqueous Dual‐Ion Battery Cathode of Mn 3 O 4 via Reversible Insertion of Nitrate

Abstract We report reversible electrochemical insertion of NO 3 − into manganese(II, III) oxide (Mn 3 O 4 ) as a cathode for aqueous dual‐ion batteries. Characterization by TGA, FTIR, EDX, XANES, EXAFS, and EQCM collectively provides unequivocal evidence that reversible oxidative NO 3 − insertion takes place inside Mn 3 O 4 . Ex situ HRTEM and corresponding EDX mapping results suggest that NO 3 − insertion de‐crystallizes the structure of Mn 3 O 4 . Kinetic studies reveal fast migration of NO 3 − in the Mn 3 O 4 structure. This finding may open a new direction for novel low‐cost aqueous dual‐ion batteries.

Jiang, Heng↗

An Aqueous Dual-Ion Battery Cathode of Mn 3 O 4 via Reversible Insertion of Nitrate

We report reversible electrochemical insertion of NO3- into manganese(II, III) oxide (Mn3O4) as a cathode for aqueous dual-ion batteries. Characterization by TGA, FTIR, EDX, XANES, EXAFS, and EQCM collectively provides unequivocal evidence that reversible oxidative NO 3 - insertion takes place inside Mn 3 O 4 . Ex situ HRTEM and corresponding EDX mapping results suggest that NO 3 - insertion de-crystallizes the structure of Mn 3 O 4 Kinetic studies reveal fast migration of NO 3 - in the Mn 3 O 4 structure. This finding may open a new direction for novel low-cost aqueous dual-ion batteries.

25 ENERGY STORAGE↗

Signal transmitter and methods for transmitting signals from animals

Injectable transmitters are provided that can include a body with the body housing a power source and an oscillator, the injectable transmitter also including an antenna extending from the body, the body and antenna being of sufficient size to be injected through a 9 gauge needle. Radio frequency transmitters are provided that can include a body extending from a nose to a tail with the body housing a power source and RF signal generator components. The power source of the transmitter can define at least a portion of the nose of the body. The transmitters can have an antenna extending from the tail. Methods for attaching a radio frequency (RF) transmitter to an animal are provided. The methods can include providing an RF transmitter and providing an injection device having a needle of gauge of 9 or smaller; providing the RF transmitter into the injection device; and providing the RF transmitter through the 9 gauge or smaller needle and into the animal.

Deng, Z. Daniel↗