Search NASA⌕ Search

Engineering topics

Lu, Jun

Publications and source records attributed to Lu, Jun.

At least 325 records · Page 18

Phosphorus: An Anode of Choice for Sodium-Ion Batteries

Phosphorus (P) offers a high theoretical capacity of 2596 mAh g -1 and thus has been intensively pursued as one of the most promising anodes for sodium-ion batteries. However, sodium storage in P anodes is facing significant technical challenges in terms of poor conductivity, large volume swelling, and an unstable solid-electrolyte interphase. These challenges need to be well mitigated before P material can be deployed in full batteries. In this Perspective, we summarize the latest research progress in the development of P anodes. Here, we focus on the design principle and criteria of efficient P anodes and materials strategies that mainly leverage the knowledge accumulated for the lithium anode of silicon. We also highlight the decisive role that theoretical simulation and in situ techniques play in addressing these difficulties associated with P materials.

25 ENERGY STORAGE↗

Efficient photocatalytic H2 production via rational design of synergistic spatially-separated dual cocatalysts modified Mn0.5Cd0.5S photocatalyst under visible light irradiation

Noble metal-free highly efficient cocatalysts are very important for cost efficient hydrogen fuel production. While most studies concentrate on single cocatalyst photocatalytic systems. Here, we report on the synthesis of Mn0.5Cd0.5S photocatalyst hetero-architecture with synergistic spatially separated dual cocatalysts Cu2-xS and MoS2 for highly efficient photocatalytic H-2 production. Through tactfully utilizing Cu2-xS/Mn0.5Cd0.5S nanoscale p-n junction to promote efficient transfer of photo-generated holes to Cu2-xS and MoS2 can be located exactly on the different positions where the photo-generated electrons must go through by photo-reduction of (NH4)(2)MoS4. Cu2-xS can be an oxidation active site to assemble photo-generated holes and MoS2 can capture and transport the photon-generated electrons. Therefore the photo-induced carriers can be efficiently separated and transferred to take part in photocatalytic reactions. The prepared Cu2-xS (0.015)/Mn0.5Cd0.5S/MoS2 (3 wt %) photocatalyst shows the highest H-2 production rate of 687.62 mu mol/h, which exceeds the rate of Mn0.5Cd0.5S and Mn0.5Cd0.5S loaded with Cu2-xS or MoS2 alone by 22, 1.7 and 3.48 times, respectively. This work provides a new thought to design efficient spatially separated and synergistic dual cocatalysts modified photocatalysts for H-2 production.

Dual cocatalysts↗

Compact 3D Copper with Uniform Porous Structure Derived by Electrochemical Dealloying as Dendrite-Free Lithium Metal Anode Current Collector

Here, the development of lithium (Li) metal anodes Li metal batteries faces huge challenges such as uncontrolled Li dendrite growth and large volume change during Li plating/stripping, resulting in severe capacity decay and high safety hazards. A 3D porous copper (Cu) current collector as a host for Li deposition can effectively settle these problems. However, constructing a uniform and compact 3D porous Cu structure is still an enormous challenge. Herein, an electrochemical etching method for Cu–Zinc (Zn) alloy is reported to precisely engrave a 3D Cu structure with uniform, smooth, and compact porous network. Such a continuous structure endows 3D Cu excellent mechanical properties and high electrical conductivity. The uniform and smooth pores with a large internal surface area ensures well dispersed current density for homogeneous Li metal deposition and accommodation. A smooth and stable solid electrolyte interphase is formed and meanwhile Li dendrites and dead Li are effectively suppressed. The Li metal anode conceived 3D Cu current collector can stably cycle for 400 h under an Li plating/stripping capacity of 1 mA h cm –2 and a current density of 1 mA cm –2 . The Li@3D Cu||LiFePO 4 full cells present excellent cycling and rate performances. The electrochemical dealloying is a robust method to construct 3D Cu current collectors for dendrite–free Li metal anodes.

25 ENERGY STORAGE↗

Bi-metallic nanoparticles as cathode electrocatalysts

A lithium-air battery cathode catalyst includes core-shell nanoparticles on a carbon support, wherein: a core of the core-shell nanoparticles is platinum metal; and a shell of the core-shell nanoparticles is copper metal; wherein: the core-shell nanoparticles have a weight ratio of the copper metal to the platinum metal from about 4% to about 6% copper to from about 2% to about 12% platinum, with a remaining percentage being the carbon support.

Lu, Jun↗

Revisiting the Role of Polysulfides in Lithium–Sulfur Batteries

Intermediate polysulfides (S n , where n = 2–8) play a critical role in both mechanistic understanding and performance improvement of lithium–sulfur batteries. The rational management of polysulfides is of profound significance for high-efficiency sulfur electrochemistry. In this paper, the key roles of polysulfides are discussed, with regard to their status, behavior, and their correspondingimpact on the lithium–sulfur system. Finally, two schools of thoughts for polysulfide management are proposed, their advantages and disadvantages are compared, and future developments are discussed.

25 ENERGY STORAGE↗

Cations controlled growth of β-MnO 2 crystals with tunable facets for electrochemical energy storage

Engineering crystal facets to enhance their functionalities often require complex processing routes to suppress the growth of surfaces with the lowest thermodynamic energies. Herein, we report a unique method to control the morphologies of β-MnO 2 crystals with different occupancy of {100}/{111} facets through the effect of K + cations. Combining aberration-corrected scanning transmission electron microscopy (STEM), ultramicrotomy, and dynamic functional theory (DFT) simulation, we clarified that the β-MnO 2 crystals were formed through a direct solid-state phase transition process. Increasing the concentration of K + cations in the precursor gradually changed the morphology of β-MnO 2 from bipyramid prism ({100}+{111} facets) to an octahedron structure ({111} facets). The K + cations controlled the morphology of β-MnO 2 by affecting the formation of α-K 0.5 Mn 4 O 8 intermediate phase and the subsequent phase transition. Utilizing the β-MnO 2 crystals as the cathode for Li-ion batteries showed that highly exposed {111} facets offered β-MnO 2 crystal better rate performance, with ~70% capacity retention when the charge-discharge rate increased from 20 mA/g to 200 mA/g. Furthermore, our work revealed a new mechanism to tune the morphology of this earth-abundant metal oxide crystal, which could be used to adjust its electrochemical performance for different applications, such as supercapacitors and catalysts for metal-air batteries and fuel cells.

25 ENERGY STORAGE↗

Dense Graphene Monolith for High Volumetric Energy Density Li-S Batteries

Despite the outstanding gravimetric performance of lithium-sulfur (Li-S) batteries, their practical volumetric energy density is normally lower than that of lithium-ion batteries, mainly due to the low density of nanostructured sulfur as well as the porous carbon hosts. Here, a novel approach is developed to fabricate high-density graphene bulk materials with ink-bottle-like mesopores by phosphoric acid (H 3 PO 4 ) activation. These pores can effectively confine the polysulfides due to their unique structure with a wide body and narrow neck, which shows only a 0.05% capacity fade per cycle for 500 cycles (75% capacity retention) for accommodating polysulfides. With a density of 1.16 g cm -3 , a hybrid cathode containing 54 wt% sulfur delivers a high volumetric capacity of 653 mA h cm -3 . As a result, a device-level volumetric energy density as high as 408 W h L -1 is achieved with a cathode thickness of 100 mu m. This is a periodic yet practical advance to improve the volumetric performance of Li-S batteries from a device perspective. Furthermore, this work suggests a design principle for the real use Li-S batteries although there is a long way ahead to bridge the gap between Li-S batteries and Li-ion batteries in volumetric performance.

25 ENERGY STORAGE↗

Insights into the Na + Storage Mechanism of Phosphorus-Functionalized Hard Carbon as Ultrahigh Capacity Anodes

Hard carbon as a typical anode material for sodium ion batteries has received much attention in terms of its low cost and renewability. Herein, phosphorus-functionalized hard carbon with a specific honeycomb briquette shaped morphology is synthesized via electrospinning technology. When applied as an anode material for Na + storage, it exhibits an impressively high reversible capacity of 393.4 mA h g -1 with the capacity retention up to 98.2% after 100 cycles. According to first-principle calculation, the ultrahigh capacity of the as-prepared anode is ascribed to the enhancement of Na-absorption through formation of P=O and P-C bonds in graphitic layers when doped with phosphorus. Furthermore, the increase of electron density around the Fermi level is found to be mainly caused by O atoms instead of P atoms.

25 ENERGY STORAGE↗

Elucidating anionic oxygen activity in lithium-rich layered oxides

Recent research has explored combining conventional transition metal redox with anionic lattice oxygen redox as a new and exciting direction to search for high-capacity lithium-ion cathodes. For this study, we probe the poorly understood electrochemical activity of anionic oxygen from a material perspective by elucidating the effect of the transition metal on oxygen redox activity. We study two lithium-rich layered oxides, specifically lithium nickel metal oxides where metal is either manganese or ruthenium, which possess similar structure and discharge characteristics, but exhibit distinctly different charge profiles. By combining X-ray spectroscopy with operando differential electrochemical mass spectrometry, we reveal completely different oxygen redox activity in each material, likely resulting from the different interaction between the lattice oxygen and transition metals. This work provides additional insights into the complex mechanism of oxygen redox and development of advanced high-capacity lithium-ion cathodes.

25 ENERGY STORAGE↗

Chemisorption of polysulfides through redox reactions with organic molecules for lithium–sulfur batteries

Lithium-sulfur battery possesses high energy density but suffers from severe capacity fading due to the dissolution of lithium polysulfides. Novel design and mechanisms to encapsulate lithium polysulfides are greatly desired by high-performance lithium-sulfur batteries towards practical applications. Herein, we report a strategy of utilizing anthraquinone, a natural abundant organic molecule, to suppress dissolution and diffusion of polysulfides species through redox reactions during cycling. The keto groups of anthraquinone play a critical role in forming strong Lewis acid-based chemical bonding. This mechanism leads to a long cycling stability of sulfur-based electrodes. With a high sulfur content of ~73%, a low capacity decay of 0.019% per cycle for 300 cycles and retention of 81.7% over 500 cycles at 0.5 C rate can be achieved. Here, this finding and understanding paves an alternative avenue for the future design of sulfur-based cathodes toward the practical application of lithium-sulfur batteries.

25 ENERGY STORAGE↗

Atomic Layer Co 3 O 4 Nanosheets: The Key to Knittable Zn-Air Batteries

Flexible, wearable, and portable energy storage devices with high-energy density are crucial for next-generation electronics. However, the current battery technologies such as lithium ion batteries have limited theoretical energy density. Additionally, battery materials with small scale and high flexibility which could endure the large surface stress are highly required. In this study, a yarn-based 1D Zn-air battery is designed, which employs atomic layer thin Co 3 O 4 nanosheets as the oxygen reduction reaction/oxygen evolution reaction catalyst. The ultrathin nanosheets are synthesized by a high-yield and facile chemical method and show a thickness of only 1.6 nm, corresponding to few atomic layers. The 1D Zn-air battery shows high cycling stability and high rate capability. The battery is successfully knitted into clothes and it shows high stability during the large deformation and knotting conditions.

25 ENERGY STORAGE↗

High Volumetric Capacitance, Ultralong Life Supercapacitors Enabled by Waxberry-Derived Hierarchical Porous Carbon Materials

Supercapacitors with fast charge/discharge rate and long cycling stability (>50 000 cycles) are attractive for energy storage and mobile power supply. In this paper, a facile strategy is developed to fabricate an Fe 2 O 3 /FeS–decorated N, S–codoped hierarchical porous carbon hybrid. Its microstructure and compositions can be readily controlled through adjusting the hydrothermal reaction between waxberry and iron sulfate. The constructed supercapacitors with the as–prepared carbon materials from this reaction are able to exhibit outstanding capacitive performance with a superfast charge/discharge rate (<1 s), ultralong cycle life (>50 000 cycles, 80 A g –1 ), ultrahigh volumetric capacitance (1320.4 F cm –3 , 0.1 A g –1 ), and high energy density (100.9 W h kg –1 , 221.9 W h L –1 ). The outstanding performance makes it one of the best biomass–derived supercapacitors. The superior capacitive behavior is likely to arise from the N and S codoping on the surface/edge/skeleton of the carbon microspheres and nanosheet composites coupled with the fast redox reaction of Fe 2 O 3 /FeS. Altogether, this research presents a new avenue for developing the next generation of sustainable high–performance energy storage device.

36 MATERIALS SCIENCE↗

Boosting Sodium Storage in TiO 2 Nanotube Arrays through Surface Phosphorylation

In this paper, sodium–ion batteries (SIBs) offer a promise of a scalable, low–cost, and environmentally benign means of renewable energy storage. However, the low capacity and poor rate capability of anode materials present an unavoidable challenge. In this work, it is demonstrated that surface phosphorylated TiO 2 nanotube arrays grown on Ti substrate can be efficient anode materials for SIBs. Fabrication of the phosphorylated nanoarray film is based on the electrochemical anodization of Ti metal in NH 4 F solution and subsequent phosphorylation using sodium hypophosphite. The phosphorylated TiO 2 nanotube arrays afford a reversible capacity of 334 mA h g –1 at 67 mA g –1 , a superior rate capability of 147 mA h g –1 at 3350 mA g –1 , and a stable cycle performance up to 1000 cycles. In situ X–ray diffraction and transmission electron microscopy reveal the near–zero strain response and robust mechanical behavior of the TiO 2 host upon (de)sodiation, suggesting its excellent structural stability in the Na+ storage application.

25 ENERGY STORAGE↗

Electrochemical Lithium Doping Induced Property Changes In Halide Perovskite CsPbBr 3 Crystal

Electrochemical doping was used to dope lithium into perovskite CsPbBr 3 crystal. Due to the doping, diamagnetic behavior was observed with a transition temperature ( T c ) of 7.17 K. Burstein-Moss effect related photoluminescence (PL) blue-shift was observed as long as 15 nm. UV-vis-NIR spectra indicate that the absorption has been enhanced. As a result, the doped CsPbBr 3 crystal generated 8 nA photocurrent, which is higher than the undoped CsPbBr 3 crystal.

36 MATERIALS SCIENCE↗

Graphene-Directed Formation of a Nitrogen-Doped Porous Carbon Sheet with High Catalytic Performance for the Oxygen Reduction Reaction

In this paper, a nitrogen (N)-doped porous carbon sheet is prepared by in situ polymerization of pyrrole on both sides of graphene oxide, following which the polypyrrole layers are then transformed to the N-doped porous carbon layers during the following carbonization, and a sandwich structure is formed. Such a sheet-like structure possesses a high specific surface area and, more importantly, guarantees the sufficient utilization of the N-doping active porous sites. The internal graphene layer acts as an excellent electron pathway, and meanwhile, the external thin and porous carbon layer helps to decrease the ion diffusion resistance during electrochemical reactions. As a result, this sandwich structure exhibits prominent catalytic activity toward the oxygen reduction reaction in alkaline media, as evidenced by a more positive onset potential, a larger diffusion-limited current, better durability and poison-tolerance than commercial Pt/C. Finally, this study shows a novel method of using graphene to template the traditional porous carbon into a two-dimensional, thin, and porous carbon sheet, which greatly increases the specific surface area and boosts the utilization of inner active sites with suppressed mass diffusion resistance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Capacity Sodium Peroxide Based Na–O 2 Batteries with Low Charge Overpotential via a Nanostructured Catalytic Cathode

The superoxide based Na-O 2 battery has circumvented the issue of large charge overpotential in Li-O-2 batteries; however, the one-electron process leads to limited capacity. Here in this paper, a sodium peroxide based low-overpotential (similar to 0.5 V) Na-O 2 battery with a capacity as high as 7.5 mAh/cm 2 is developed with Pd nanoparticles as catalysts on the cathode.

25 ENERGY STORAGE↗