Search NASA⌕ Search

Engineering topics

Lu, Jun

Publications and source records attributed to Lu, Jun.

At least 127 records · Page 7

1000 Wh L−1 lithium-ion batteries enabled by crosslink-shrunk tough carbon encapsulated silicon microparticle anodes

Abstract Microparticulate silicon (Si), normally shelled with carbons, features higher tap density and less interfacial side reactions compared to its nanosized counterpart, showing great potential to be applied as high-energy lithium-ion battery anodes. However, localized high stress generated during fabrication and particularly, under operating, could induce cracking of carbon shells and release pulverized nanoparticles, significantly deteriorating its electrochemical performance. Here we design a strong yet ductile carbon cage from an easily processing capillary shrinkage of graphene hydrogel followed by precise tailoring of inner voids. Such a structure, analog to the stable structure of plant cells, presents ‘imperfection-tolerance’ to volume variation of irregular Si microparticles, maintaining the electrode integrity over 1000 cycles with Coulombic efficiency over 99.5%. This design enables the use of a dense and thick (3 mAh cm–2) microparticulate Si anode with an ultra-high volumetric energy density of 1048 Wh L–1 achieved at pouch full-cell level coupled with a LiNi0.8Co0.1Mn0.1O2 cathode.

25 ENERGY STORAGE↗

A universal method to fabricating porous carbon for Li-O 2 battery

The main bottleneck in the application of biomass-based carbon material in energy field is the development of an economical, nanoscale controllable and universal fabrication method. Herein, we demonstrate that a biomass-derived carbon consisting of loose carbon nanosphere clusters could serve as an ideal cathode material for high performance Li-O 2 batteries. The carbon nanomaterial can be prepared from both biomass derivatives and crude biomass by a low cost, facile and nanoscale controllable method. The open slit-shaped hierarchical pore structure endows the electrode sufficient active surface sites and mass transport channels that are not easily asphyxiated by the discharge products. The concentration of oxygenic groups and structure defects on the surface of obtained carbon materials is very low, which minimizes the side reactions associated with carbon decomposition. Finally, the unique pore structure and surface properties of the carbon electrode give rise to a superhigh specific capacity of 20,300 mA h g -1 and an extremely long cycle life which a cyclic capacity retention of 100% is maintained for 543 cycles with current density of 0.2 mA cm -2 at controlled discharge-charge depths of 500 mA h g -1 .

25 ENERGY STORAGE↗

Visualizing Lithium Dendrite Formation within Solid-State Electrolytes

Solid-state electrolyte (SSE) is promising for application in allsolid-state lithium metal batteries because of its reliable safety and longevity. The failure of SSE to suppress dendrite formation of Li metal anodes has been conventionally explained by uneven Li deposition at Li/SSE interfaces and its subsequent dendritic growth. While Li deposition within SSE has been recently proposed as another key cause for SSE failure, little is known regarding the Li growth details inside the SSE itself. In this work, we performed in situ microscopic observation of Li deposition inside the SSE and obtained visualized evidence regarding the dynamic process of Li dendrite formation and growth. Here, Li is seen to directly nucleate and propagate within the SSE, leading to its structural cracking. Such behavior should be caused by the presence of P- and S-based crystalline defects in Li 3 PS 4 SSE, which is consistent with the cryo-transmission electron microscopy observations and theoretical calculations. This observation provides important insights into the growth mechanisms of Li dendrites within a working lithium battery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ Construction of Uniform and Robust Cathode–Electrolyte Interphase for Li-Rich Layered Oxides

The high-energy-density Li-rich layered oxides (LLOs) as promising cathodes for Li-ion batteries suffer from the dissolution of transition metals (especially manganese) and severe side reactions in conventional electrolytes, which greatly deteriorate their electrochemical performance. Herein, an in situ “anchoring + pouring” synergistic cathode-electrolyte interphase (CEI) construction is realized by using 1,3,6-hexanetricarbonitrile (HTCN) and tris(trimethylsilyl) phosphate (TMSP) electrolyte additives to alleviate the challenges of an LLO (Li 1.13 Mn 0.517 Ni 0.256 Co 0.097 O 2 ). HTCN with three nitrile groups can tightly anchor transition metals by coordinative interaction to form the CEI framework, and TMSP will electrochemically decompose to reshape the CEI layer. The uniform and robust in situ constructed CEI layer can suppress the transition metal dissolution, shield the cathode against diverse side reactions, and significantly improve the overall electrochemical performance of the cathode with a discharge voltage decay of only 0.5 mV/cycle -1 . Further investigations based on a series of experimental techniques and theoretical calculations have revealed the composition of in situ constructed CEI layers and their distribution, including the enhanced HTCN anchoring effect after lattice densification of LLOs. Finally, this study provides insights into the in situ CEI construction for enhancing the performance of high-energy and high-voltage cathode materials through effective, convenient and economical electrolyte approaches.

25 ENERGY STORAGE↗

Counter-Intuitive Structural Instability Aroused by Transition Metal Migration in Polyanionic Sodium Ion Host

The structure of polyanionic materials is conventionally known to be free of transition metal migration and structurally stable when storing/releasing sodium ions. Herein, the observation of enhanced cycling stability of a typical polyanionic cathode, Na 3 VCr(PO 4 ) 3 (NVCP) at lower temperature (-15 degrees C vs 30 degrees C), triggers the exploration of its structural origins with a surprising finding that the migratable nature of vanadium in NVCP leads to detrimental structural degradation of the polyanionic host upon cycling. The correlation between long range and short range structural change associated with this atomic migration is established via a strong combination of various in situ/ex situ characterization tools, revealing the essential V-to-Na1 site migration. Such transition metal migration is effectively suppressed when V atoms are pinned to their original position in the lattice by lowering the temperature. More importantly and practically, a room temperature-based deep sodiation strategy is further developed to recover the structure. Overall, this work challenges the long-standing assumption of the stability of the polyanionic framework structure and calls for urgent attention to the structural understanding of the NVCP system as well as strategy development for property enhancement.

25 ENERGY STORAGE↗

Revealing the Atomic Structures of Exposed Lateral Surfaces for Polymorphic Manganese Dioxide Nanowires

Polymorphic 1D MnO 2 nanostructures are widely applied in fields such as catalysis, sensing, and energy storage with the functionality mainly determined by the atomic patterns of their laterally exposed facets, which largely remain unclear so far. Herein, by high‐resolution transmission electron microscopy (HRTEM) imaging directly along their axial directions, the atomic structures of the outmost lateral facets of polymorphic MnO 2 nanowires are disclosed. To generalize the findings, four most commonly seen phases with characteristic tunnel structures are targeted, i.e., β‐, γ‐, α‐, and todorokite(t)‐MnO 2 , which are synthesized conventionally using a hydrothermal method reported in the literature. Axially imaging these MnO 2 nanowires via HRTEM, the {hkl} facets covering the lateral surfaces are accurately indexed, the atomic pattern of each {hkl} facet is revealed, and it is further coupled with the outmost tunnel configuration that can significantly affect the physicochemical property of MnO 2 materials via tunnel‐driven mass adsorption/transport. This work provides a reliable reference for atomic modeling of MnO 2 to benefit the pursuit of its structure–property relationship; in addition, it can benefit surface engineering strategies to better rationalize the facet growth control with optimized functionality.

Yuan, Yifei↗

Direct observation of the formation and stabilization of metallic nanoparticles on carbon supports

Direct formation of ultra-small nanoparticles on carbon supports by rapid high temperature synthesis method offers new opportunities for scalable nanomanufacturing and the synthesis of stable multi-elemental nanoparticles. However, the underlying mechanisms affecting the dispersion and stability of nanoparticles on the supports during high temperature processing remain enigmatic. In this work, we report the observation of metallic nanoparticles formation and stabilization on carbon supports through in situ Joule heating method. We find that the formation of metallic nanoparticles is associated with the simultaneous phase transition of amorphous carbon to a highly defective turbostratic graphite (T-graphite). Molecular dynamic (MD) simulations suggest that the defective T-graphite provide numerous nucleation sites for the nanoparticles to form. Furthermore, the nanoparticles partially intercalate and take root on edge planes, leading to high binding energy on support. This interaction between nanoparticles and T-graphite substrate strengthens the anchoring and provides excellent thermal stability to the nanoparticles. These findings provide mechanistic understanding of rapid high temperature synthesis of metal nanoparticles on carbon supports and the origin of their stability.

36 MATERIALS SCIENCE↗

Analysis of the Stable Interphase Responsible for the Excellent Electrochemical Performance of Graphite Electrodes in Sodium-Ion Batteries

Considerable efforts have been exerted to understand the formation and properties of the solid electrolyte interphase (SEI) in sodium ion batteries. However, the puzzling existence and role of SEI behind the huge volume changes of the graphite electrodes need to be answered. Herein, the reason of how ether-derived SEI maintains excellent reversibility despite the huge volume changes during cycling is unraveled. Theoretical simulations and Fourier-transform infrared spectroscopy demonstrate the formation mechanism of an SEI between the graphite anode and electrolyte. Furthermore, the high mechanical tolerance of the ether-derived SEI is confirmed in atomic force microscopy. A depth profile of X-ray photoelectron spectroscopy points to a multilayer structure of the ether-derived SEI. The outer layer comprises organics (sodium alkoxide), while the inorganics (Na 2 CO 3 , NaF) in interior region are mixed with some organics. Notably, the presence of organics ensures the adaptability of the SEI to the volume expansion of graphite during cycling, and the concentrated distribution of inorganics improves the Young's modulus (resistance to deformation). Therefore, the graphite anode exhibits high cycle stability (96.6% capacity retention ratio at 1 A g –1 over 860 cycles) and efficiency (≈99.5%).

25 ENERGY STORAGE↗

Cation Additive Enabled Rechargeable LiOH‐Based Lithium–Oxygen Batteries

Abstract Lithium–oxygen (Li–O 2 ) batteries have attracted extensive research interest due to their high energy density. Other than Li 2 O 2 (a typical discharge product in Li–O 2 batteries), LiOH has proved to be electrochemically active as an alternative product. Here we report a simple strategy to achieve a reversible LiOH‐based Li–O 2 battery by using a cation additive, sodium ions, to the lithium electrolyte. Without redox mediators in the cell, LiOH is detected as the sole discharge product and it charges at a low charge potential of 3.4 V. A solution‐based reaction route is proposed, showing that the competing solvation environment of the catalyst and Li + leads to LiOH precipitation at the cathode. It is critical to tune the cell chemistry of Li–O 2 batteries by designing a simple system to promote LiOH formation/decomposition.

Bi, Xuanxuan↗

Unraveling the Nature of Excellent Potassium Storage in Small-Molecule Se@Peapod-Like N-Doped Carbon Nanofibers

The potassium-selenium (K-Se) battery is considered as an alternative solution for stationary energy storage because of abundant resource of K. However, the detailed mechanism of the energy storage process is yet to be unraveled. In this work, the findings in probing the working mechanism of the K-ion storage in Se cathode are reported using both experimental and computational approaches. A flexible K-Se battery is prepared by employing the small-molecule Se embedded in freestanding N -doped porous carbon nanofibers thin film (Se@NPCFs) as cathode. The reaction mechanisms are elucidated by identifying the existence of short-chain molecular Se encapsulated inside the microporous host, which transforms to K 2 Se by a two-step conversion reaction via an "all-solid-state" electrochemical process in the carbonate electrolyte system. Through the whole reaction, the generation of polyselenides (K 2 Se n , 3 ≤ n ≤ 8) is effectively suppressed by electrochemical reaction dominated by Se-2 molecules, thus significantly enhancing the utilization of Se and effecting the voltage platform of the K-Se battery. This work offers a practical pathway to optimize the K-Se battery performance through structure engineering and manipulation of selenium chemistry for the formation of selective species and reveal its internal reaction mechanism in the carbonate electrolyte.

25 ENERGY STORAGE↗

Cathode materials for lithium ion batteries

A process of forming a coated cathode active material include preparing a cathode material precursor by co-precipitation; coating the cathode material precursor with an electrochemically inert coating material precursor by precipitation to form a coated cathode material precursor; lithiating the coated cathode material precursor with a lithium source material to form a lithiated coated cathode material precursor; and sintering the lithiated coated cathode material precursor to form a cathode active material coated with an electrochemically inert material.

Wu, Huiming↗

Beyond Volume Variation: Anisotropic and Protrusive Lithiation in Bismuth Nanowire

Materials storing energy via an alloying reaction are promising anode candidates in rechargeable lithium-ion batteries (LIBs) due to their much higher energy density than the current graphite anode. Until now, the volumetric expansion of such electrode particles during lithiation has been considered as solely responsible for cycling-induced structural failure. Here, we report different structural failure mechanisms using single-crystalline bismuth nanowires as the alloying-based anode. The Li–Bi alloying process exhibits a two-step transition, that is, Bi–Li 1 Bi and Li 1 Bi–Li 3 Bi. Interestingly, the Bi–Li 1 Bi phase transition occurs not only in the bulk Bi nanowire but also on the particle surface showing its characteristic behavior. The bulk alloying kinetics favors a Bi-(012)-facilitated anisotropic lithiation, whose mechanism and energetics are further studied using the density functional theory calculations. More importantly, the protrusion of Li 1 Bi nanograins as a result of anisotropic Li–Bi alloying is found to dominate the surface morphology of Bi particles. The growth kinetics of Li 1 Bi protrusions is understood atomically with the identification of two different controlling mechanisms, that is, the dislocation-assisted strain relaxation at the Bi/Li 1 Bi interface and the short-range migration of Bi supporting the off-Bi growth of Li 1 Bi. As loosely rooted to the bulk substrate and easily peeled off and detached into the electrolyte, these nanoscale protrusions developed during battery cycling are believed to be an important factor responsible for the capacity decay of such alloying-based anodes at the electrode level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cation Additive Enabled Rechargeable LiOH-Based Lithium–Oxygen Batteries

Lithium-oxygen (Li-O 2 ) batteries have attracted extensive research interest due to their high energy density. Other than Li 2 O 2 (a typical discharge product in Li-O 2 batteries), LiOH has proved to be electrochemically active as an alternative product. Here we report a simple strategy to achieve a reversible LiOH-based Li-O 2 battery by using a cation additive, sodium ions, to the lithium electrolyte. Without redox mediators in the cell, LiOH is detected as the sole discharge product and it charges at a low charge potential of 3.4 V. A solution-based reaction route is proposed, showing that the competing solvation environment of the catalyst and Li+ leads to LiOH precipitation at the cathode. It is critical to tune the cell chemistry of Li-O 2 batteries by designing a simple system to promote LiOH formation/decomposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reversible (De)Intercalation of Hydrated Zn 2+ in Mg 2+ -Stabilized V 2 O 5 Nanobelts with High Areal Capacity

The rechargeable aqueous zinc ion battery (ZIB) is regarded as one of the most promising candidates for large-scale energy storage applications due to its low-cost and eco-friendly properties. However, the development of a suitable cathode operating with high areal capacity and uncovering the relevant reaction mechanisms remain challenging. Herein, the application of Mg 0.26 V 2 O 5 ∙0.73H 2 O (MVO) nanobelts as a ZIB cathode is demonstrated. In situ FT-IR reveals the shift of OH stretching from 3350 cm -1 to 3200 cm -1 , corresponding to the hydration shell of Zn 2+ , while in situ Raman suggests the interlayer charges creening effect, which would boost the intercalation of hydrated Zn 2+ . Density function theory reveals that the hydrated Zn 2+ can lower the Coulombic repulsion at the electrode-electrolyte interface and circumvents the desolvation penalty of hydrated Zn 2+ during the (de)intercalation process. Additionally, excellent structure stability and large interlayer spacing guarantee the highly reversible (de)intercalation of hydrated Zn 2+ . Therefore, the MVO nanobelts exhibit a high areal capacity of 2.12 mAh cm -2 at 0.05 A g -1 , outstanding cycling stability of 2500 cycles at 10 A g -1 with a mass loading of 5 mg cm -2 . Finally, it is believed that the use of hydrated intercalation charge carriers will boost further studies in other multivalent rechargeable batteries.

25 ENERGY STORAGE↗