Search NASA⌕ Search

Engineering topics

Lu, Jun

Publications and source records attributed to Lu, Jun.

At least 163 records · Page 9

Consolidating Lithiothermic-Ready Transition Metals for Li2S-Based Cathodes

Li 2 S holds a promising role as a high-capacity Li-containing cathode, circumventing use of metallic lithium in constructing next-generation batteries to replace current Li-ion batteries. However, progress of Li 2 S cathode has been plagued by its intrinsic drawbacks, including high activation potentials, poor rate performance, and rapid capacity fading during long cycling. In this work, a series of Li 2 S/transition metal (TM) nanocomposites are synthesized via a lithiothermic reduction reaction, and it is realized that the presence of TMs in Li 2 S matrix can transform electrochemical behaviors of Li 2 S. On the one hand, the incorporation of W, Mo, or Ti greatly increases electronic and ionic conductivity of Li 2 S composites and inhibits the polysulfide dissolution via the TM—S bond, effectively addressing the drawbacks of Li 2 S cathodes. In particular, Li 2 S/W and Li 2 S/Mo exhibit the highest ionic conductivity of solid-phase Li-ion conductors ever-reported: 5.44 × 10 –2 and 3.62 × 10 –2 S m –1 , respectively. On the other hand, integrating Co, Mn, and Zn turns Li 2 S into a prelithiation agent, forming metal sulfides rather than S 8 after the full charge. These interesting findings may shed light on the design of Li 2 S-based cathode materials.

25 ENERGY STORAGE↗

Durian-Inspired Design of Bismuth–Antimony Alloy Arrays for Robust Sodium Storage

Sodium-ion batteries have attracted widespread attention for cost-effective and large-scale electric energy storage. However, their practical deployment has been largely retarded by the lack of choice of efficient anode materials featuring large capacity and electrochemical stability and robustness. Herein, we report a durian-inspired design and template-free fabrication of a robust sodium anode based on triangular pyramid arrays of Bi 0.75 Sb 0.25 alloy electrodeposited on Cu substrates. The Bi 0.75 Sb 0.25 arrays exhibit an appreciable electrochemical robustness for sodium storage, sustaining a reversible capability 335 mAh g –1 at a high rate of 2.5 A g –1 and 87% of the initial capacity over 2000 cycles. We further demonstrate the applicability of the Bi 0.75 Sb 0.25 array anode in sodium full cells by pairing it with a Na 3 V 2 (PO 4 ) 3 /C cathode. This full cell achieves a high specific energy of 203 Wh kg –1 (based on both active electrodes). Such an enhanced performance is attributed to the thorny-durian-like architecture and bimetallic alloy composition. In conclusion, the pyramid tip induces ion enrichment for rapid charge-transfer reaction, while the alloy design reduces the electrode volume swelling for stable Na cycling.

25 ENERGY STORAGE↗

Mesoporous PdAg Nanospheres for Stable Electrochemical CO 2 Reduction to Formate

Palladium is a promising material for electrochemical CO 2 reduction to formate with high Faradaic efficiency near the equilibrium potential. It unfortunately suffers from problematic operation stability due to CO poisoning on surface. In this work, it is demonstrated that alloying is an effective strategy to alleviate this problem. Mesoporous PdAg nanospheres with uniform size and composition are prepared from the co-reduction of palladium and silver precursors in aqueous solution using dioctadecyldimethylammonium chloride as the structure-directing agent. The best candidate can initiate CO 2 reduction at zero overpotential and achieve high formate selectivity close to 100% and great stability even at <-0.2 V versus reversible hydrogen electrode. The high selectivity and stability are believed to result from the electronic coupling between Pd and Ag, which lowers the d-band center of Pd and thereby significantly enhances its CO tolerance, as evidenced by both electrochemical analysis and theoretical simulations.

36 MATERIALS SCIENCE↗

A High-Rate Aqueous Proton Battery Delivering Power Below -78 °C via an Unfrozen Phosphoric Acid

Lithium-sulfur batteries are attractive for automobile and grid applications due to their high theoretical energy density and the abundance of sulfur. Despite the significant progress in cathode development, lithium metal degradation and the polysulfide shuttle remain two critical challenges in the practical application of Li-S batteries. Development of advanced electrolytes has become a promising strategy to simultaneously suppress lithium dendrite formation and prevent polysulfide dissolution. Here, a new class of concentrated siloxane-based electrolytes, demonstrating significantly improved performance over the widely investigated ether-based electrolytes are reported in terms of stabilizing the sulfur cathode and Li metal anode as well as minimizing flammability. Through a combination of experimental and computational investigation, it is found that siloxane solvents can effectively regulate a hidden solvation-ion-exchange process in the concentrated electrolytes that results from the interactions between cations/anions and solvents. As a result, it could invoke a quasi-solid-solid lithiation and enable reversible Li plating/stripping and robust solid-electrolyte interphase chemistries. The solvation-ion-exchange process in the concentrated electrolytes is a key factor in understanding and designing electrolytes for other high-energy lithium metal batteries.

25 ENERGY STORAGE↗

Three-Dimensional Microbatteries beyond Lithium Ion

Ubiquitous implementation of microelectronics in microelectromechanical systems requires stable power supplies and necessitates development of on-chip miniature power sources, such as microbatteries. However, conventional thin-film batteries exhibit limited surface area and sluggish diffusion kinetics with insufficient energy and power density. In contrast, three-dimensional (3D) beyond-lithium (sodium, zinc, aluminum, etc.) battery architectures can significantly enhance the areal energy and power and meanwhile maintain the low-cost mass production. Despite this, the future of beyond-lithium systems is being questioned as they each present shortcomings. In this Comment, we discuss scientific advancements in reaction kinetics control, electrochemical stability improvements, and reaction mechanism understandings in 3D beyond-lithium battery systems, and finally, call for intensive research effort to address the challenges and develop strategies that can pave the way toward their commercialization.

25 ENERGY STORAGE↗

A Lithium Metal Anode Surviving Battery Cycling Above 200 °C

Lithium (Li) metal electrode cannot endure elevated temperature (e.g., >200 °C) with the regular battery configuration due to its low melting point (180.5 °C) and high reactivity, which restricts its application in high-temperature Li metal batteries for energy storage and causes safety concerns for regular ambient-temperature Li metal batteries. Herein, this work reports a Li 5 B 4 /Li composite featuring a 3D Li 5 B 4 fibrillar framework filled with metallic Li, which maintains its initial structure at 325 °C in Ar atmosphere without leakage of the liquid Li. The capillary force caused by the porous structure of the Li 4 B 5 fibrillar framework, together with its lithiophilic surface, restricts the leakage of liquid metallic Li and enables good thermal tolerance of the Li 5 B 4 /Li composite. Thus, it can be facilely operated for rechargeable high-temperature Li metal batteries. Li 5 B 4 /Li electrodes are coupled with a garnet-type ceramic electrolyte (Li 6.5 La 3 Zr 0.5 Ta 1.5 O 12 ) to fabricate symmetric cells, which exhibit stable Li stripping/plating behaviors with low overpotential of approximate to 6 mV at 200 °C using a regular sandwich-type cell configuration. This study affords new insights into realizing a stable Li metal anode for high-temperature Li metal batteries with a simple battery configuration and high safety, which is different from traditional molten-salt Li metal batteries using a pristine metallic Li anode.

25 ENERGY STORAGE↗

Rational Design of a Ni 3 N 0.85 Electrocatalyst to Accelerate Polysulfide Conversion in Lithium–Sulfur Batteries

Slow kinetics of polysulfide conversion reactions lead to severe issues for lithium–sulfur (Li–S) batteries, for example, low rate capability, polysulfide migration, and low Coulombic efficiencies. These challenges hinder the practical applications of Li–S batteries. Here, we proposed a rational strategy of tuning the d-band of catalysts to accelerate the conversion of polysulfides. Nitrogen vacancies were engineered in hexagonal Ni 3 N (space group P 6 3 22) to tune its d-band center, leading to the strong interaction between polysulfides and Ni 3 N. Because of the greater electron population in the lowest occupied molecular orbital of Li 2 S 4 , the terminal S–S bonds were weakened for breaking. Temperature-dependent experiments confirm that Ni 3 N 0.85 demonstrates a much low activation energy, thereby accelerating the conversion of polysulfides. A Li–S cell using Ni 3 N 0.85 can deliver a high initial discharge capacity of 1445.9 mAh g –1 (at 0.02 C) and low decay per cycle (0.039%). The Ni 3 N 0.85 cell can also demonstrate an initial capacity of 1200.4 mAh g –1 for up to 100 cycles at a high loading of 5.2 mg cm –2 . The high efficiency of rationally designed Ni 3 N 0.85 demonstrates the effectiveness of the d-band tuning strategy to develop low-activation-energy catalysts and to promote the atomic understanding of polysulfide conversion in Li–S batteries.

25 ENERGY STORAGE↗

Potassium Prussian blue-coated Li-rich cathode with enhanced lithium ion storage property

With high specific capacity, the layered Li-rich Mn-based oxide (LRMO) is a promising candidate cathode material for Li-ion batteries. However, the irreversible release of Li-ions during the first charging process, instability of LRMO/electrolyte interface and relatively low ion conductivity of LRMO result in low initial Coulombic efficiency (ICE), poor cycle stability and rate performance, which prohibit its further application. Furthermore, interface engineering via additive coating is expected to effectively address these issues. Herein, we rely on potassium Prussian blue (KPB), a Li + acceptor with good ion conductivity, as a new coating material on LRMO particles. The KPB coating not only forms a protective layer on the surface of LRMO against electrolyte corrosion, but also functions as a host for Li + transport and accommodation, leading to enhanced ion conductivity and ICE of LRMO cathode. Consequently, 2 wt% KPB coated LRMO cathode achieved an initial discharge capacity of up to 281.7 mA h g -1 with an ICE of 85.69% compared to an ICE of 79.52% for the LRMO cathode without coating. The cycling and rate performance are also greatly improved as evidenced by the well maintained capacity of up to 176.8 mA h g -1 after 100 cycles at a current density of 0.5 C, compared to the limited capacity of only 135.3 mA h g -1 for the LRMO cathode without coating. Overall, this work pioneers the use of potassium Prussian blue as additive coating material to enhance performance of LRMO cathode, and we expect it to inspire the battery community with new strategies of material engineering/design toward practical application in high-energy lithium-ion batteries.

25 ENERGY STORAGE↗

From Sodium–Oxygen to Sodium–Air Battery: Enabled by Sodium Peroxide Dihydrate

Metal-air batteries have attracted extensive research interests due to their high theoretical energy density. However, most of the previous studies were limited by applying pure oxygen in the cathode, sacrificing the gravimetric and volumetric energy density. Here, we develop a real sodium-"air" battery, in which the rechargeability of the battery relies on the reversible reaction of the formation of sodium peroxide dihydrate (Na 2 O 2 ∙ 2H 2 O). After an oxygen evolution reaction catalyst is applied, the charge overpotential is largely reduced to achieve a high energy efficiency. The sodium-air batteries deliver high areal capacity of 4.2 mAh.cm -2 and have a decent cycle life of 100 cycles. The oxygen crossover effect is largely suppressed by replacing the oxygen with air, whereas the dense solid electrolyte interphase formed on the sodium anode further prolongs the cycle life.

25 ENERGY STORAGE↗

Surface Amorphization of Vanadium Dioxide (B) for K-ion Battery

Given the merits of low cost, fast ionic transport in electrolyte, and high operating voltage, potassium ion batteries (PIBs) are promising alternatives to lithium-ion batteries. However, developing suitable electrode materials that can reversibly accommodate large potassium ions is a great challenge. In this paper, guided by density functional theory (DFT) calculations, it is demonstrated that the strategy of interfacial engineering via surface amorphization of VO 2 (B) nanorods (SA-VO 2 ), which results in the formation of a crystalline core/amorphous shell heterostructure, enables superior K + storage performance in terms of large capacity, outstanding rate capability, and long cycle stability working as an anode for PIBs. DFT calculations reveal that the created crystalline/amorphous heterointerface in SA-VO 2 can substantially lower the surface energy, narrow the band gap, and reduce the K + diffusion barrier of VO 2 (B). These conditions enable enhanced K + storage capacity and rapid K + /electron transfer, which result in large capacity and outstanding rate capability. Using in situ X-ray diffraction and in situ transmission electron microscopy complemented by ex situ microscopic and spectroscopic techniques, it is unveiled that the superior cycling stability originates from the excellent phase reversibility with negligible strain response and robust mechanical behavior of SA-VO 2 upon (de)potassiation.

25 ENERGY STORAGE↗

Synthesis of high-entropy alloy nanoparticles on supports by the fast moving bed pyrolysis

High-entropy alloy nanoparticles (HEA-NPs) are important class of materials with significant technological potential. However, the strategies for synthesizing uniformly dispersed HEA-NPs on granular supports such as carbon materials, γ-Al 2 O 3 , and zeolite, which is vital to their practical applications, are largely unexplored. Herein, we present a fast moving bed pyrolysis strategy to immobilize HEA-NPs on granular supports with a narrow size distribution of 2 nm up to denary (MnCoNiCuRhPdSnIrPtAu) HEA-NPs at 923 K. Fast moving bed pyrolysis strategy ensures the mixed metal precursors rapidly and simultaneously pyrolyzed at high temperatures, resulting in nuclei with a small size. The representative quinary (FeCoPdIrPt) HEA-NPs exhibit high stability (150 h) toward hydrogen evolution reaction with high mass activity, which is 26 times higher than the commercial Pt/C at an overpotential of 100 mV. Our strategy provides an improved methodology for synthesizing HEA-NPs on various supports.

36 MATERIALS SCIENCE↗

Revisit the VEC rule in high entropy alloys (HEAs) with high-throughput CALPHAD approach and its applications for material design-A case study with Al–Co–Cr–Fe–Ni system

Valence electron concentration (VEC) was treated as a useful parameter to predict solid solution phases, and the VEC rule was proposed for high entropy alloys (HEAs). However, this empirical rule has its limitations, which restricts its applications for phase predictions in HEAs. In this paper, we revisited the empirical VEC rule with the HT-CALPHAD approach in the Al–Co–Cr–Fe–Ni system. Our investigation showed that more than 90% compositions are observed to have BCC structures when 5.7≤VEC≤7.2 and we got 100% FCC structures when VEC≥8.4. Meanwhile, we proposed a data screening procedure to classify and discover the new HEAs. The concepts of average density (ρHEA), highest BCC/FCC temperatures ($T$ $^{max}_{BCC/FCC}$), and temperature ranges (ΔT BCC/FCC ) were introduced as useful data screening criteria to down-screen the candidate alloy compositions for specific engineering applications. In the current work, we have identified three HEA categories (refractory BCC HEAs, light-weight BCC HEA and refractory FCC HEAs) in the Al–Co–Cr–Fe–Ni system and proposed the best candidate in each group. Here, our investigation showed the HEA non-equiatomic composition space provides ample opportunities for the discovery of the next-generation HEAs.

36 MATERIALS SCIENCE↗

Enhancing Oxygen Reduction Activity of Pt-based Electrocatalysts: From Theoretical Mechanisms to Practical Methods

Pt-based electrocatalysts are considered as one of the most promising choices to facilitate the oxygen reduction reaction (ORR), and the key factor enabling their success is to reduce the required amount of platinum. Herein, we focus on illuminating both the theoretical mechanisms which enable enhanced and sustained ORR activity and the practical methods to achieve them in catalysts. The various multi-step pathways of ORR are firstly reviewed and the rate-determining steps based on the reaction intermediates and their binding energies are analyzed. We then explain the critical aspects of Pt-based electrocatalysts to tune oxygen reduction properties from the viewpoints of active sites exposure and altering the surface electronic structure, and further summarize representative research progress towards practically achieving these activity enhancements with a focus on platinum size reduction, shape control and core Pt elimination methods. Finally, we outline the remaining challenges and provide our perspectives with regard to further enhancing their activities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flexible metal–gas batteries: a potential option for next-generation power accessories for wearable electronics

Flexible metal–gas batteries have become increasingly attractive for use in wearable electronics in the recent years due to their large theoretical energy density and superior adaptability to irregular geometric surfaces, such as the human body. With continuous improvements in design strategies and assembly technologies, the fabrication of various advanced flexible metal–gas batteries has been attempted. In spite of these efforts, the synchronous integration of high flexibility, safety, comfort, and high performance into flexible metal–gas batteries with specifically functionalized configurations still remains a formidable challenge. To resolve these dilemmas, the redesign of cathode catalysts, gel polymer electrolyte, and battery configurations/components has been investigated. In this paper, we review the recent technical advances together with the major dilemmas facing currently available flexible metal–gas batteries, highlighting how flexible cathodes and gel polymer electrolytes with various structures and components can affect the electrochemical performance and functionality of flexible metal–gas batteries. Flexible Zn–air, Li–O 2 /air, and Li–CO 2 batteries are mainly exemplified to elucidate their promising potential. Finally, based on our considerations, unresolved technical hurdles and future research perspectives involving flexible metal–gas batteries for wearable electronics are proposed.

25 ENERGY STORAGE↗

Rooting binder-free tin nanoarrays into copper substrate via tin-copper alloying for robust energy storage

The need for high-energy batteries has driven the development of binder-free electrode architectures. However, the weak bonding between the electrode particles and the current collector cannot withstand the severe volume change of active materials upon battery cycling, which largely limit the large-scale application of such electrodes. Using tin nanoarrays electrochemically deposited on copper substrate as an example, here we demonstrate a strategy of strengthening the connection between electrode and current collector by thermally alloying tin and copper at their interface. The locally formed tin-copper alloys are electron-conductive and meanwhile electrochemically inactive, working as an ideal "glue" robustly bridging tin and copper to survive harsh cycling conditions in sodium ion batteries. The working mechanism of the alloy "glue" is further characterized through a combination of electrochemical impedance spectroscopy, atomic structural analysis and in situ X-ray diffraction, presenting itself as a promising strategy for engineering binder-free electrode with endurable performance. The authors here report a binder-free electrode based on tin nanoarrays deposited on copper substrate. It is found that the locally formed electrochemically inactive tin-copper alloys work as a glue that bridges tin and copper to survive harsh cycling conditions in sodium ion batteries.

25 ENERGY STORAGE↗