Search NASA⌕ Search

Engineering topics

Lucey, Paul G.

Publications and source records attributed to Lucey, Paul G..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Investigating Diurnal Changes in the Normal Albedo of the Lunar Surface at 1064 nm: A New Analysis with the Lunar Orbiter Laser Altimeter

The thermal environment of the lunar surface is extreme. At the equator, temperatures drop ~300 K between local noon and night. Laboratory studies demonstrate that minerals common to the lunar surface (e.g.,pyroxene, olivine) show spectral changes with respect to temperature in near infrared wavelengths. Over temperature changes equivalent to the lunar thermal environment (ΔT ≈ 300K), the reflectance of pure pyroxene samples can vary by a factor of two.

Deutsch, Ariel N.↗
NASA NTRS2015

Mineralogy and Astrobiology Detection Using Laser Remote Sensing Instrument

A multispectral instrument based on Raman, laser-induced fluorescence (LIF), laser-induced breakdown spectroscopy (LIBS), and a lidar system provides high-fidelity scientific investigations, scientific input, and science operation constraints in the context of planetary field campaigns with the Jupiter Europa Robotic Lander and Mars Sample Return mission opportunities. This instrument conducts scientific investigations analogous to investigations anticipated for missions to Mars and Jupiter's icy moons. This combined multispectral instrument is capable of performing Raman and fluorescence spectroscopy out to a >100 m target distance from the rover system and provides single-wavelength atmospheric profiling over long ranges (>20 km). In this article, we will reveal integrated remote Raman, LIF, and lidar technologies for use in robotic and lander-based planetary remote sensing applications. Discussions are focused on recently developed Raman, LIF, and lidar systems in addition to emphasizing surface water ice, surface and subsurface minerals, organics, biogenic, biomarker identification, atmospheric aerosols and clouds distributions, i.e., near-field atmospheric thin layers detection for next robotic-lander based instruments to measure all the above-mentioned parameters. OCIS codes: (120.0280) Remote sensing and sensors; (130.0250) Optoelectronics; (280.3640) Lidar; (300.2530) Fluorescence, laser-induced; (300.6450) Spectroscopy, Raman; (300.6365) Spectroscopy, laser induced breakdown

Abedin, M. Nurul↗
NASA NTRS2006

Uncooled long-wave infrared hyperspectral imaging

A long-wave infrared hyperspectral sensor device employs a combination of an interferometer with an uncooled microbolometer array camera to produce hyperspectral images without the use of bulky, power-hungry motorized components, making it suitable for UAV vehicles, small mobile platforms, or in extraterrestrial environments. The sensor device can provide signal-to-noise ratios near 200 for ambient temperature scenes with 33 wavenumber resolution at a frame rate of 50 Hz, with higher results indicated by ongoing component improvements.

Lucey, Paul G.↗
NASA NTRS2006

RTF+SpeX Near-IR Images and Spectra of the Moon Pre-impact and at Impact of SMART-1

We present SpeX 0.8-2.5 micron spectra and Br-gamma or J H or K-band images of the Moon on 2006 July 10 UT, 2006 Sep 1 UT, and 2006 Sep 3 UT. The first two dates are data taken in preparation (near Full Moon and 1 st quarter Moon) for observing the impact of ESA's SMART-1 Lunar satellite on 2006 Sep 3 UT. We hope to be presenting images (about 1 arc minute by 1 arc minute), and low resolution (Prism mode) spectra of the SMART-1 impact to be taken with the 60 arc second long slit.

Wooden, Diane H.↗
NASA NTRS2004

Coastal Research Imaging Spectrometer

The Coastal Research Imaging Spectrometer (CRIS) is an airborne remote sensing system designed specifically for research on the physical, chemical, and biological characteristics of coastal waters. The CRIS includes a visible-light hyperspectral imaging subsystem for measuring the color of water, which contains information on the biota, sediment, and nutrient contents of the water. The CRIS also includes an infrared imaging subsystem, which provides information on the temperature of the water. The combination of measurements enables investigation of biological effects of both natural and artificial flows of water from land into the ocean, including diffuse and point-source flows that may contain biological and/or chemical pollutants. Temperature is an important element of such measurements because temperature contrasts can often be used to distinguish among flows from different sources: for example, a sewage outflow could manifest itself in spectral images as a local high-temperature anomaly. Both the visible and infrared subsystems scan in pushbroom mode: that is, an aircraft carrying the system moves along a ground track, the system is aimed downward, and image data are acquired in across-track linear arrays of pixels. Both subsystems operate at a frame rate of 30 Hz. The infrared and visible-light optics are adjusted so that both subsystems are aimed at the same moving swath, which has across-track angular width of 15 . Data from the infrared and visible imaging subsystems are stored in the same file along with aircraft- position data acquired by a Global Positioning System receiver. The combination of the three sets of data is used to construct infrared and hyperspectral maps of scanned areas (see figure). The visible subsystem is based on a grating spectrograph and a rapid-readout charge-coupled-device camera. Images of the swatch are acquired in 256 spectral bands at wavelengths from 400 to 800 nm. The infrared subsystem, which is sensitive in a single wavelength band of 8 to 10 m, is based on a focal-plane array of HgCdTe photodetectors that are cooled to an operating temperature of 77 K by use of a closed-Stirling-cycle mechanical cooler. The nonuniformities of the HgCdTe photodetector array are small enough that the raw pixel data from the infrared subsystem can be used to recognize temperature differences on the order of 1 C. By use of a built-in blackbody calibration source that can be switched into the field of view, one can obtain bias and gain offset terms for individual pixels, making it possible to offset the effects of nonuniformities sufficiently to enable the measurement of temperature differences as small as 0.1 C.

Lucey, Paul G.↗
NASA NTRS2002

Coastal Research Imaging Spectrometer

The Coastal Research Imaging Spectrometer (CRIS) is an airborne remote-sensing system designed specifically for research on the physical, chemical, and biological characteristics of coastal waters. The CRIS includes a visible-light hyperspectral imaging subsystem for measuring the color of water, which contains information on the biota, sediment, and nutrient contents of the water. The CRIS also includes an infrared imaging subsystem, which provides information on the temperature of the water. The combination of measurements enables investigation of biological effects of both natural and artificial flows of water from land into the ocean, including diffuse and point-source flows that may contain biological and/or chemical pollutants. Temperature is an important element of such measurements because temperature contrasts can often be used to distinguish among flows from different sources: for example, a sewage outflow could manifest itself in spectral images as a local high-temperature anomaly.

Lucey, Paul G.↗
NASA NTRS1998

Multispectral Mapping of the Moon by Clementine

One of the chief scientific objectives of the Clementine mission at the Moon was to acquire global multispectral mapping. A global digital map of the Moon in 11 spectral bandpasses and at a scale of 100 m/pixel is being produced at the U.S. Geological Survey in Flagstaff Arizona Near-global coverage was acquired with the UVVIS camera (central wavelengths of 415, 750, 900, 950, and 1000 nm) and the NIR camera (1102, 1248, 1499, 1996, 2620, and 2792 nary). We expect to complete processing of the UVVIS mosaics before the fall of 1998, and to complete the NIR mosaics a year later. The purpose of this poster is to provide an update on the processing and to show examples of the products or perhaps even a wall-sized display of color products from the UVVIS mosaics.

Eliason, Eric M.↗
NASA NTRS1995

Remote Sensing and Geologic Studies of the Schiller-Schickard Region of the Moon

Near-infrared reflectance spectra, multispectral images, and photogeologic data for the Schiller-Schickard (SS) region were obtained and analyzed in order to determine the composition and origin of a variety of geologic units. These include light plains deposits, Orientale-related deposits, mare units, and dark-haloed impact craters (DHCs). Spectral data indicate that the pre-Orientale highland surface was dominated by noritic anorthosite. Near-IR spectra show that DHCs in the region have excavated ancient (greater than 3.8 Ga) mare basalts from beneath highland-bearing material emplaced by the Orientale impact. Ancient mare basalts were widespread in the SS region prior to the Orientale event, and their distribution appears to have been controlled by the presence of several old impact basins, including the Schiller-Zucchius basin and a basin previously unrecognized. Both near-IR spectra and multispectral images indicate that light plains and other Orientale-related units in the SS region contain major amounts of local, pre-Orientale mare basalt. The amounts of local material in these deposits approach, but seldom exceed, the maximum values predicted by the local mixing hypothesis of Oberbeck and co-workers.

Blewett, David T.↗
NASA NTRS1995

Mid-infrared (5.0-7.0 microns) imaging spectroscopy of the moon from the KAO

A series of 71 mid-infrared images of a small region of the Moon were obtained from the KAO in October, 1993. These images have been assembled into a 5.0 to 7.0 micron image cube that has been calibrated relative to the average spectrum of this region of the Moon at these wavelengths. The data show that clear, detectable spectral differences exist on the Moon in the mid-IR. Some of the spectral differences are correlated with morphologic features such as craters. Specific spectral features near 5.6 and 6.7 microns may be related to the presence of plagioclase or pyroxene.

Bell, James F., III↗
NASA NTRS1994

High resolution visible to short-wave near-infrared CCD spectra of Mars during 1990

The 0.4 to 1.0 micron spectrum of Mars is dominated by a steep red, relatively featureless spectral slope. Earlier lower spectral observations interpreted the red color and the lack of absorption features in the spectra as evidence of poorly crystalline ferric oxide minerals. More recent higher spectral resolution observations and reinterpretations of older data sets have revealed measureable spectral structure, however. For example, absorption features near 0.65 and 0.86 micron were detected and spatially mapped in data obtained during the 1988 opposition. These absorptions were interpreted as evidence for crystalline hematite on Mars, occuring as an accessory phase in abundances of 3 to 6 percent in the soil. We are attempting to verify the existence of these subtle crystalline Fe(3+) absorption features and to map their spatial distribution in regions of the planet not imaged in 1988. During the 1990 opposition, we obtained imaging spectroscopic data of Mars from the University of Hawaii 2.24 m telescope at Mauna Kea Observatory. The data were obtained with the Wide Field Grism Spectrograph (WFGS), which uses an 800 x 800 CCD and a transmission grating ruled on a prism. We used a grating blazed at 4800 A in first order to obtain data from 0.50 to 0.94 micron at a spectral resolution of R = 200 to 350. The moon/Mars slit design used had projected dimensions of 0.29 x 153 inches, allowing for high spectral resolution and adequate cross-slit spatial sampling of the Martian disk.

Bell, James F., III↗
NASA NTRS1993

Evaluation of infrared emission spectroscopy for mapping the Moon's surface composition from lunar orbit

Infrared thermal emission spectroscopy is evaluated for its possible application to compositional mapping of the Moon's surface from lunar orbit. Principles of the mid-IR (approximately 4-25 microns) technique, previous lunar ground-based observations, and laboratory studies of Moon samples are reviewed and summarized. A lunar thermal emission spectrometer experiment is described, patterned after a similar instrument on the Mars Observer spacecraft. Thermal emission spectrometry from a polar-orbiting lunar spacecraft could provide a valuable mapping tool to aid in exploration for lunar resources and help provide understanding of the origin of the Moon and history of lunar surface processes.

Nash, Douglas B.↗
NASA NTRS1993

Radiative temperature measurements at Kupaianaha lava lake, Kilauea Volcano, Hawaii

The radiative temperature of the surface of Kupaianaha lava lake is computed using field spectroradiometer data. Observations were made during periods of active overturning. The lake surface exhibits three stages of activity. Magma fountaining and overturning events characterize stage 1, which exhibits the hottest crustal temperatures and the largest fractional hot areas. Rifting events between plates of crust mark stage 2; crustal temperatures in this stage are between 100 C and 340 C, and fractional hot areas are at least an order of magnitude smaller than those in stage 1. Stage 3 is characterized by quiescent periods when the lake is covered by a thick crust. This stage dominates the activity of the lake more than 90 percent of the time. The results of this study are relevant for satellite and airborne measurement of the thermal characteristics of active volcanoes, and indicate that the thermal output of a lava lake varies on a time scale of seconds to minutes.

Flynn, Luke P.↗
NASA NTRS1993

Remote sensing studies of the terrain northwest of Humorum basin

We have used near-infrared reflectance spectra and Earth-based radar data to investigate the composition and origin of the various geologic units northwest of Humorum basin as well as the stratigraphy of the Humorum preimpact target site. The results of our spectral analysis indicate that at least a portion of the inner, mare-bounding ring is composed of pure anorthosite. Other highlands units in the region are dominated by noritic anorthosite. The anorthosites on the inner ring may have been derived from a layer of anorthosite that exists at depth beneath a more pyroxene-rich unit. Both Gassendi G and F craters expose mare material from beneath a highlands-rich surface unit that was emplaced as a result of the Letronne, Gassendi, and other impact events. This ancient basalt unit was emplaced after the formation of Humorum basin but prior to the Orientale impact.

Hawke, B. R.↗
NASA NTRS1993

First results of the seven-color asteroid survey

The new Seven-Color infrared filter system (SCAS), designed specifically to capture the essential mineralogical information present in asteroid spectra, is composed of seven broad-band filters which allow for IR observations of objects as faint as 17th magnitude. The first test of the SCAS system occurred in Jul. 1992. In four nights at the IRTF on Mauna Kea, Hawaii, over 67 objects were observed. Five of the observations were to test the new system for accuracy relative to previous observations with the high-resolution 52 Color Infrared Survey and with the Eight-Color Asteroid Survey (ECAS). In three cases, the match with previous data was good. In two cases, the match to previous observations was not as good. In addition, sixty S-Type asteroids were measured with the SCAS system. Forty of those asteroids were also observed with the ECAS system. Among the new observations is infrared data of 371 Bohemia, a main belt asteroid which was classified 'QSV' according to its UBV colors in the taxonomic system of D.J. Tholen. There are no corresponding ECAS data for 371. Q-type asteroids are of special interest as they are proposed to be the elusive parent bodies of the ordinary chondrite meteorites. Most Q-types are Earth-crossing asteroids and have not yet been observed in the infrared (except, perhaps, 371). Positive identification of a large main belt Q-type would be of major importance in the scheme of the geological structure of the asteroid belt. Without visible wavelength data, however, the classification of 371 Bohemia remains ambiguous. An attempt to conjoin Bohemia SCAS data with ECAS data of both a typical Q-Type asteroid and an average S-Type asteroid is shown. This figure thus illustrates the importance of visible wavelength data to the SCAS system. In other words, without ECAS data of 371 Bohemia we cannot use its spectral characteristics to identify it as a possible parent body of ordinary chondrite meteorites.

Clark, Beth E.↗
NASA NTRS1993

Spectral mixing models of S-Type asteroids

This paper presents the results of an attempt to determine S-Type asteroid mineralogies with the use of Hapke theory spectral mixing modelling. Previous attempts to understand the spectral variations present in this single class of asteroids have concentrated on spectral parameters such as absorption band center wavelengths, band area ratios, and geometric albedos. The procedure taken here is to utilize the Hapke spectral reflectance model to calculate single scatter albedo as a function of wavelength for a suite of candidate end-member materials. These materials are then mixed linearly in single scatter albedo space, and the mixture is converted, assuming intimate particle mixing, back to reflectance for the spectrum matching routine. A total of 39 S-Type asteroids selected from the Bell et al. survey have been matched with mixture model spectra.

Clark, Beth E.↗
NASA NTRS1993

The Clementine instrument complement

The recent successes of the Galileo solid-state imaging (SSI) experiment at the Moon and Gaspra show the utility of multispectral imaging of planetary objects. 'Clementine' is the planetary community's 'code name' for the SDIO (Space Defense Initiative Organization), mission to the Moon and the asteroid Geographos. This mission is designed as a long term stressing test on sensors and space systems developed for SDIO. In the course of this test Clementine will obtain science data using a varied and powerful array of remote sensing instruments which were developed by or for Lawrence Livermore National Laboratory in Livermore, California. Clementine carries five cameras, one for navigation and four for science experiments. In addition, a laser ranger is included which will serve as a laser altimeter. The Clementine cameras cover a wider range of spatial resolutions and wavelength range than did Galileo and are almost ideally suited to mapping of mafic rock types as are present on the Moon and expected at Geographos. Calibration of the cameras will occur at the sensor calibration laboratory at LLNL. In flight calibrations, using standard stars and other standards should improve the stated accuracies. Signal-to-noise ratios (SNRs) include the following noise sources: shot noise, calibration error, digitization noise, readout noise, and frame transfer noise (where applicable). The achieved SNRs are a balance between detector saturation and acceptable image smear. The 'worst' case uses the longest possible integration times.

Lucey, Paul G.↗
NASA NTRS1993

Mixing model analysis of telescopic lunar spectra

We have analyzed very high quality reflectance spectra of the lunar surface from the University of Hawaii lunar spectral data collection using a spectral mixing model. The spectra analyzed are those of 45 mare sites and 75 highland sites. The spectra were selected on the basis of very high signal to noise ratios based on error bars and point to point scatter, and on quality of removal of telluric water bands. The spectral mixing model used 7 components, not all of which were used in each fit. Four of the components were mineral spectra of the orthopyroxene, a clinopyroxene, an olivine and an anorthite, measured at the Brown University's RELAB. All of the minerals were 45-90 micron splits. Lunar soil contains other components which have the effect of reddening and darkening the soil as well as reducing spectral contrast. In addition, lunar soil contains spectral neutral bright material (likely very fine grained feldspar) which serves to reduce spectral contrast and brighten soils. Early attempts to fit many of the spectra pointed out the need for a component which has a very broad smooth absorption feature centered near 1.1 microns. Glass is a good candidate for this component. For the bright component we used a flat reflectance of 70 percent to represent fine grained feldspar. For the 'glass' component we used a telescopic spectrum of a pyroclastic glass present on the Aristarchus plateau which is characterized by a strong smooth band centered at 1.07 microns. In addition to exhibiting the glass band this spectrum is very red and has a low albedo. On the assumption that the dark component and the red component are agglutinates, which is reasonable but not necessarily true, we sought a dark red component. To derive its properties we modelled the spectrum of an Apollo 16 soil (16xxx) and assumed the dark red component to comprise 60 percent of the soil, appropriate to agglutinate abundance in mature soil. We adjusted the albedo and slope of a straight line representing the dark red component until the contrast and albedo of the model spectrum matched the soil spectrum. The mixing was done after conversion to a single scattering albedo.

Lucey, Paul G.↗