Search NASA⌕ Search

Engineering topics

Ludtka, Gail Mackiewicz-

Publications and source records attributed to Ludtka, Gail Mackiewicz-.

Magnetic Processing of Steel Strip and Next Generation Alloys

High magnetic field processing was applied in two separate process configurations. In the first configuration, a laboratory-scale continuous razor blade processing line incorporating ORNL’s ambient temperature high magnetic field technology for increased energy efficiency and material performance enhancement was successfully demonstrated during the project. This facility simulated a critical portion of a high temperature heat-treatment razor blade material processing line and demonstrated that a costly and energy inefficient cryogenic cooling processing to control retained austenite (RA) could be eliminated with an ambient temperature magnetic process. Magnetic processing resulted in improved process energy efficiency, reduced microstructural variability in the final product, and higher hardness for better performance than currently employed cryogenic commercial processing. Therefore, from both a technical and cost benefit perspective, high magnetic field processing incorporated into a razor strip production line was shown to be a technically-feasible, commercially-viable approach to making a superior blade razor product.

Ludtka, Gerard Michael↗

Processing solubility enhancement and Nanoparticles dispersion enhanced Performance Materials through thermomagnetic processing

This research demonstrates that significantly enhanced materials microstructures and improved performance can be achieved by coupling two previously independent materials research concepts, namely, the thermo-magnetic processing (T-MP)1 and the electromagnetic acoustic transducer (EMAT)2 technologies. In prior, separate NHMFL research endeavors, ORNL researchers have demonstrated that: (1) thermo-magnetic processing (T-MP) can significantly enhance Ni solubility in Fe by up to 30%; and (2) using the electromagnetic acoustic transducer (EMAT) technology can significantly improve cast product homogeneity. Based on these earlier successful results, we proposed simultaneously coupling these two R&D approaches/eff ects (i.e., T-MP with EMAT), in order to simultaneously achieve: (1) enhanced elemental solid-solubility in Mg and in at least one Fe-based alloy; and (2) uniform dispersion of intentional additions of inert nanoparticles in Mg. Developing homogeneous dispersions of inert nanoparticles is and has been pursued as one of the holy grails for achieving unprecedented materials performance and highly desired mechanical properties, e.g., in creep and oxidation resistant alloys. Successfully coupling these two technologies would provide the ability to create uniquely controlled nano-scale microstructures that currently are unachievable by any other materials processing technologies.

36 MATERIALS SCIENCE↗

Exchange Coupling Nanophase Fe-Pd Ferromagnets Through Solid State Transformation

This study continues previous work on off stoichiometric Fe-Pd alloys using a combined reaction strategy during thermomechanical processing [1,2]. Severe plastic deformation of the initial disordered fcc gamma phase ( ), followed by heat treatment in the two phase field produces a nano-composite ferromagnet comprised of soft alpha-Fe/ferrite in a high-anisotropy L10 FePd matrix. The length scale and morphology of the transformation products have been characterized using x-ray diffraction, and scanning and transmission electron microscopy. The transformed microstructures exhibit strong texture retention similar to the stoichiometric alloy suggesting a massive ordering mode. The alloy has shown a proclivity to exchange couple at a length scale not in agreement with proposed theories of exchange coupling [3,4]. The magnetic properties were measured using standard vibrating sample magnetometry (VSM). This research has been supported by the National Science Foundation (NSF-DMR).

36 MATERIALS SCIENCE↗

Electron Microscopy Study of Hypo-Stoichiometric Fe-Pd Nanocomposites Resulting from Combined Reaction Thermomechanical Processing

Hypo stoichiometric Fe-Pd binary alloys (35-45 at% Pd) were severely deformed (>90%) and subsequently aged to induce concomitant recrystallization, precipitation, and ordering. This thermomechanical processing strategy was articulated by Hornbogen [1] over thirty years ago. The resulting exchange-coupled ferromagnets contain ferrite precipitates and a complex metastable twophase lamellar transformation product comprised of ordered L10 and a metastable FCC phase. The later duplex microconstituent is suggested to form in conjunction with a so-called pseudospinodal reaction [2] involving emerging cubic and tetragonal phases, whereby phase separation and ordering result from continuous changes in composition and a reduction in symmetry, cubic to tetragonal. The deformation texture of the parent austenite is substantially retained in the transformation product, resulting in anisotropy of the magnetic properties as determined by magnetometry (VSM). This paper presents electron microscopy results elucidating the crystallography and morphology of the phase mixtures including HREM. Magnetic field annealing is also included as a branch of our thermomechanical processing strategy, and we discuss the influence of the external fields on recrystallization, precipitation, and ordering. This work was performed in cooperation with ORNL and the NHMFL and is supported by the NSF DMR.

36 MATERIALS SCIENCE↗

Use of High Magnetic Fields to Improve Material Properties for Hydraulics, Automotive and Truck Components

In this CRADA, research and development activities were successfully conducted on magnetic processing effects for the purpose of manipulating microstructure and the application specific performance of three alloys provided by Eaton (alloys provided were: carburized steel, plain low carbon steel and medium carbon spring steel). Three specific industrial/commercial application areas were considered where HMFP can be used to provide significant energy savings and improve materials performance include using HMFP to: 1.) Produce higher material strengths enabling higher torque bearing capability for drive shafts and other motor components; 2.) Increase the magnetic response in an iron-based material, thereby improving its magnetic permeability resulting in improved magnetic coupling and power density, and 3.) Improve wear resistance. The very promising results achieved in this endeavor include: 1.) a significant increase in tensile strength and a major reduction in volume percent retained austenite for the carburized alloy, and 2.) a substantial improvement in magnetic perm respect to a no-field processed sample (which also represents a significant improvement over the nominal conventional automotive condition of no heat treatment). The successful completion of these activities has resulted in the current 3-year CRADA No. NFE-09-02522 Prototyping Energy Efficient ThermoMagnetic and Induction Hardening for Heat Treat and Net Shape Forming Applications .

Eaton Innovation Center↗

A Study to Develop an Industrial-Scale, Computer-Controlled High Magnetic Field Processing (HMFP) System to Assist in Commercializing the Novel, Enabling HMFP Manufacturing Technology

As the original magnet designer and manufacturer of ORNL s 9T, 5-inch ID bore magnet, American Magnetics Inc. (AMI) has collaborated with ORNL s Materials Processing Group s and this partnership has been instrumental in the development of our unique thermo-magnetic facilities and expertise. Consequently, AMI and ORNL have realized that the commercial implementation of the High Magnetic Field Processing (HMFP) technology will require the evolution of robust, automated superconducting (SC) magnet systems that will be cost-effective and easy to operate in an industrial environment. The goal of this project and CRADA is to significantly expedite the timeline for implementing this revolutionary and pervasive cross-cutting technology for future US produced industrial components. The successful completion of this project is anticipated to significantly assist in the timely commercialization and licensing of our HMFP intellectual property for a broad spectrum of industries; and to open up a new market for AMI. One notable outcome of this project is that the ThermoMagnetic Processing Technology WON a prestigious 2009 R&D 100 Awards. This award acknowledges and recognizes our TMP Technology as one of the top 100 innovative US technologies in 2009. By successfully establishing the design requirements for a commercial scale magnetic processing system, this project effort has accomplished a key first step in facilitating the building and demonstration of a superconducting magnetic processing coil, enabling the transition of the High Magnetic Field Processing Technology beyond a laboratory novelty into a commercially viable and industrially scalable Manufacturing Technology.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗