Search NASA⌕ Search

Engineering topics

Luecke, Jon H.

Publications and source records attributed to Luecke, Jon H..

Understanding how chemical structure affects ignition-delay-time $\phi$-sensitivity

$\phi$-sensitivity is the change in ignition delay time (IDT) with respect to the fuel-to-air equivalence ratio ($\phi$). High $\phi$-sensitivity is a desirable fuel property for applications in advanced compression ignition and multi-mode engine designs. Understanding how $\phi$-sensitivity depends on chemical structure is essential for selecting promising biofuels from the ever-growing list of proposed candidates. Here, we investigate the effect of chemical structure on $\phi$-sensitivity with experiment, simulation, and theory. Experimental Advanced Fuel Ignition Delay Analyzer (AFIDA) measurements for 2,4-dimethylpentane and diisopropyl ether provide evidence that branching and functional groups strongly impact $\phi$-sensitivity. Further insights into this dependence are obtained with 0-D kinetic simulations with existing mechanisms for n-pentane, diethyl ether, 3-pentanone, n-heptane, 2-methylhexane, 2,4-dimethylpentane, and 2,2,3-trimethylbutane. Quantum mechanical (QM) G4 calculations of low-temperature reactions help explain the observed experimental and simulation trends. Specifically, these QM calculations provide theoretical estimates of the ketohydroperoxide (KHP) dissociation rates, the HO 2 formation rates from peroxy radical (ROO), and the “cross-over” temperatures, i.e., the temperature at which ROO dissociation is favored compared to hydroperoxyl radical (QOOH) formation. Each of these reaction rates is compared to the n-alkane reference point to determine the impact of branching and different functional groups. Although kinetic mechanisms typically assume that KHP dissociation rates are invariant of chemical environment, our QM results suggest that this rate can span a range of roughly two orders of magnitude. We also discuss the importance of including the peroxy-hydroperoxy (OO-OOH) hydrogen transfer reaction for branched ethers. Finally, the insights gained assist in proposing a highly $\phi$-sensitive compound, namely, isopropyl propyl ether.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tailoring diesel bioblendstock from integrated catalytic upgrading of carboxylic acids: a “fuel property first” approach

Abstract Lignocellulosic biomass offers the potential to produce renewable fuels at a scale commensurate with petroleum consumption. Hybrid approaches that combine biological and chemocatalytic processes have garnered increasing attention due to their flexibility for feedstock utilization and diversity of potential products. Of note, lignocellulosic sugars can be converted biologically to short-chain carboxylic acids, while subsequent chemocatalytic upgrading can elongate the carbon backbone and remove oxygen from the structure to produce drop-in hydrocarbon fuels. However, hybrid conversion processes are typically not designed with the fuel properties in mind a priori . In this work, we apply a “fuel property first” design approach to produce a tailored hydrocarbon bioblendstock with lower intrinsic sooting and drop-in diesel fuel potential. Initially, model predictions for six fuel properties critical to diesel applications (physicochemical requirements, energy content, safety considerations, autoignition ability, and sooting tendency) were used to screen an array of hydrocarbons accessible from upgrading individual and mixed C 2 /C 4 acids. This screening step allowed for down-selection to a non-cyclic branched C 14 hydrocarbon (5-ethyl-4-propylnonane) that can be synthesized from butyric acid through sequential catalytic reactions of acid ketonization, ketone condensation, and hydrodeoxygenation. Following evaluation of each conversion step with model compounds, butyric acid was then converted through an integrated catalytic process scheme to achieve >80% overall carbon yield to a hydrocarbon mixture product containing >60% of the target C 14 hydrocarbon. The potential of this conversion strategy to produce a hydrocarbon diesel bioblendstock from lignocellulosic biomass was then demonstrated using corn stover-derived butyric acid produced from Clostridium butyricum fermentation. Experimental fuel property testing of the purified C 14 blendstock validated the majority of the fuel property model predictions, including <50% of the intrinsic sooting tendency when compared to conventional diesel. Meanwhile, the crude conversion product met fuel property target metrics, validating conversion process development. When the C 14 bioblendstock was blended into a petroleum diesel at 20 vol.%, the blend maintained low cloud point, high energy density, and cetane number. Notably, the blend reduced sooting tendency by more than 10%, highlighting the potential of the tailored bioblendstock to reduce particulate emissions.

09 BIOMASS FUELS↗

U.S. Department of Energy Fuels & Lubricants Project on Lubricant Technology - Innovation, Discovery, Design, and Engineering (Final Report)

In 2016, the Vehicle Technologies Office (VTO) of the Department of Energy (DOE) issued a solicitation for the AOP Lab Call research in FY2017 on a number of topics related to vehicles. Topic 6A of the Lab Call focused on research related to advanced lubricants: '...(in) support of the lubricants program goal to, by 2020, demonstrate novel formulations for powertrain and driveline lubricants, compatible with new and legacy vehicles, to achieve at least a 4 percent real-world fuel economy improvement.' Argonne National Laboratory (ANL) in collaboration with Oak Ridge National Laboratory (ORNL) and Pacific Northwest National Laboratory (PNNL) was awarded a 3-year multilab project on 'Lubricant Technology - Innovation, Discovery, Design, and Engineering.' Research on the project began in FY2017 at the three laboratories with industry participation; however, in FY2018, the project was terminated due to budgetary constraints. The following is the final report for the project and highlights progress made during the first year of research. The report is divided into sections that highlight the following: goals, objectives, milestones and deliverables; project highlights; outreach - publications, conferences, and reports; milestones accomplished; research progress.

30 DIRECT ENERGY CONVERSION↗

The Impacts of Mid-Level Alcohol Content in Gasoline on SIDI Engine-Out and Tailpipe Emissions

Influences of ethanol and iso-butanol on gasoline engine performance, engine-out and tailpipe emissions were studied using a General Motors (GM) 2.0L turbocharged gasoline spark ignition direct injection (SIDI) engine. U.S. federal certification gasoline (E0), two ethanol-blended fuels (E10 and E20), and 11.7% iso-butanol blended fuels were tested. Fourier-Transform Infrared (FTIR) spectroscopy was used to measure non-regulated species including methane, ethylene, acetylene, formaldehyde, acetaldehyde, isobutylene, 1,3-butadiene, n-pentane, and iso-octane. A Fast Mobility Particle Sizer (FMPS) spectrometer was used to measure the particle number (PN) size distribution in the range from 5.6 to 560 nm. The regulated emissions total hydrocarbon (THC), carbon monoxide (CO), and oxides of nitrogen (NOx ) were also measured. We presented both engine-out and tailpipe emissions results as functions of alcohol content. In general, the alcohols tested reduced total PN emissions, with iso-butanol demonstrating the greatest reduction. Increasing ethanol content and iso-butanol increased formaldehyde emissions, with iso-butanol exhibiting the highest increase. Iso-butanol increased iso-butylene emission; however, it reduced emissions of 1,3-butadiene. Finally, within the context of this study, the alcohols did not significantly change the other regulated emissions.

09 BIOMASS FUELS↗