Engineering topics

Luis Rodriguez

Publications and source records attributed to Luis Rodriguez.

5 records

NASA NTRS2026

Assessment of Near-Angle Scatter on Exo-Earth Coronagraphy

Near-Angle Scatter (NAS) of the host star’s light into the coronagraph dark hole may limit the ability of a potential Habitable Worlds Observatory (HWO) to detect and characterize an Earth-like planet around a Sun-like star. This paper summarizes a 5-year investigation of the impact of NAS on high-contrast coronagraphy. Science requirements were flowed down to a draft flux ratio noise ratio (FRN) error budget with allocations for NAS. The modeled sources of NAS include correlated (low and mid-spatial) surface structure, uncorrelated surface microroughness and coating structure, particulate contamination, micrometeoroid impacts and polarization leakage. The paper develops specifications for these sources of scattered light that meet their FRN error budget allocations, distinguishing between scatter that can and cannot be modulated. The development process utilizes an analytical expression that predicts scatter throughput into the dark hole based on BRDF/BSDF. Using this relationship, Photon Engineering performed a FRED® straylight analysis of the HWO EAC-1 (Exploratory Analytical Case #1) coronagraph to parametrically study predicted scattered light contrast in the dark hole. The model revealed that primary mirror microroughness or contamination is not a significant source of scattered light; the most critical surfaces are the smallest and those located closest to the coronagraph focal plane mask. The assessment found that uncorrelated microstructure, contamination, and micrometeoroid impacts require more investigation and potential significant sources of unmodulated scattered light, and highlights that slow thermal wavefront drift is an order of magnitude more impactful than fast mechanical jitter.

coronagraphy↗

NASA NTRSDate not supplied

Solid-State Exergy Optimized Electric Aircraft Thermal and Fault Management

Future air vehicles will increasingly incorporate electrical powertrains that require very tight system level integration of power, propulsion, thermal, fault protection, and airframe technologies. This paper provides an overview of a new category of thermal energy conversion technology that can be used to enable a fully solid-state integrated thermal and fault management electric aircraft protection system, while synergistically managing and recycling both the low-grade waste heat from electrical components and the high-grade waste heat from engine components. This is achieved with exergy amplification of the powertrain waste-heat, a new class of fast flight-weight breakers, new class of long variable conductance heat pipe with multiple switchable condensers, new class of turbofan integrated heat exchangers and a gradient-based powertrain system optimizer.

safety↗

NASA NTRSDate not supplied

Nuclear Electric Propulsion Brayton Power Conversion Working Fluid Considerations

NASA has considered Nuclear Electric Propulsion (NEP) for high ∆V missions since the late 1950s, but the current technology readiness level of the requisite power-train needs to be raised for such a mission. The powertrain includes reactor, power conversion, power management, electric propulsion, and thermal management components that must be integrated to minimize system a (kg/kWe) and to finalize a propulsion system architecture within the 2025-2027 timeframe requires advancing these component technologies to technology readiness level (TRL) 5 and Advancement Degree of Difficulty (AD2) 3 in an expeditious manner with minimal risks. This paper will only address the power conversion (heat to electric) components of that system. Based on both internal and industry studies, a primary conclusion of this work is that a single-spool supercritical Xe-He radial flux Brayton heat engine combined with a permanent magnet synchronous alternator can potentially be developed with the least technical risk to meet the technology readiness schedule and required NEP system performance metrics.

Nuclear Electric Propulsion (NEP)↗

NASA NTRSDate not supplied

Nuclear Electric Propulsion Brayton Power Conversion Working Fluid Considerations

NASA has considered Nuclear Electric Propulsion (NEP) for high V missions since the late 1950’s, but the current technology readiness level of the requisite powertrain needs to be raised for such a mission. The powertrain includes reactor, power conversion, power management, electric propulsion, and thermal management components that must be integrated to minimize system (kg/kWe) and to finalize a propulsion system architecture within the 2025-2027 timeframe requires advancing these component technologies to technology readiness level (TRL) 5 and Advancement Degree of Difficulty (AD2) 3 in an expeditious manner with minimal risks. This paper will only address the power conversion (heat to electric) components of that system. Based on both internal and industry studies, a primary conclusion of this work is that a single-spool supercritical Xe-He radial flux Brayton heat engine combined with a permanent magnet synchronous alternator can potentially be developed with the least technical risk to meet the technology readiness schedule and required NEP system performance metrics.

Nuclear↗

NASA NTRSDate not supplied

Multi-Convertor Configurable Simulator for Dynamic Radioisotope Power Systems

This paper presents the multi-convertor configurable simulator (MCCS) that can emulate piston/displacer dynamics and power outputs of various types of free-piston Stirling convertors developed at NASA GRC, including Technical Demonstration Convertor (TDC), Advanced Stirling Convertor (ASC), Flexure Isotope Stirling Convertor (FISC), Sunpower Robust Stirling Convertor (SRSC), and P2A. The MCCS can emulate up to four convertors, instead of two convertors in state-of-the-art Stirling simulators, and the maximum power output for each convertor is 1kW. Furthermore, hardware and software changes required to switch between convertors are minimized for easy conversion. A hardware-in-loop (HIL) system is used to easily switch between convertors by updating linearized modeling parameters in software. Also, switched-mode AC power supplies are used to generate wide ranges of voltage and current to emulate different types of Stirling convertors without replacing AC power supplies. Finally, the inductors emulating the linear alternator, which is the only hardware change needed for conversion, are modularized in alternator boxes to enable easy replacement of the inductors. These two features—easy conversion and capability of emulating up to four 1kW-convertors—will enable the validation tests of multi-convertor controller (MCC) concepts that are being developed by APL, the Dynamic Radioisotope Power System (DRPS) generator, and other controller developments for current and future DRPS flight projects. Finally, the MCCS is configured to demonstrate emulation of four FISCs and the outputs of the MCCS are compared with experimental data from the actual FISC.

Free-Piston Stirling Convertor Controller↗