Search NASA⌕ Search

Engineering topics

Luke Roberson

Publications and source records attributed to Luke Roberson.

Electrodeionization Salt Removal from Water

This project developed a method to selectively extract sodium (Na) from complex, mission-relevant wastewaters using electricity as a driving force. The team investigated capacitive deionization (CDI), which has been used for general desalination but not for selective removal of Na. Three tasks supported this overall aim: designing and building a reactor and electrodes, engineering absorption and desorption parameters, and investigating varying water compositions and sources. Potential benefits of this approach include integrating into existing Environmental Control & Life Support Systems (ECLSS) treatment trains, reducing salinity for hydroponic installations, and producing food preservatives. Significant accomplishments, including building new reactors and characterizing their optimal operations and applications, advance the frontier of in-situ resource utilization for planetary habitation.

Luke Roberson↗

Design Optimization of Energized Composite Using Simulation and Experimental Methods

As electric vehicles (EVs) are evolving, innovative technologies like “energized composite” that can store energy in the car's body helps extend its range per charge. The composite's unique ability to function as both structural body panel and charge storage medium stems from its unique pattern design between “electrochemical areas (EcA)” and “epoxy area (EpA)”. Herein, a design optimization study is presented to obtain a balanced ratio between EcA versus EpA to maximize the charge storage ability of the composite while maintaining a decent tensile and bending strength. Simulations using ANSYS software and experimental confirmation using universal testing machines and electrochemical analyzers are used to derive optimum ratios between EcA and EpA. Uniaxial tension test and 3-point bend test have been performed to optimize the tensile and bend strengths, whereas cyclic voltammetry, galvanic charge–discharge, and electrochemical impedance spectroscopy are used to determine the electrochemical performance of various design configurations by modulating the ratios of EcA versus EpA. Overall, the highest achieved energy storage per lamina is 2531 mWh m−2 for a maximum of 81.6% EcA with a tensile strength of 417.73 MPa and bending strength of 263.13 MPa. This study is highly beneficial for EVs and aerospace applications.

energy storage↗

Aquatic Invertebrate Protein Sources for Long-Duration Space Travel

During the summer of 2020, NASA returned to launching astronauts to the International Space Station (ISS) from American soil. By 2024, NASA’s mission is to return to the Moon, and by 2028 create a sustainable presence. Long duration missions come with obstacles, especially when trying to create a sustainable environment in a location where “living off the land” is impossible. Some resources on the Moon can be recovered or resupplied; however, many resources such as those needed for sustaining life must be recycled or grown to support humans. To achieve sustainability, food and water must be grown and recycled using elements found within the habitat. NASA’s current work focuses on food resupply and growing plants as supplemental nutrient content. This paper examines the possibility for using aquaculture systems to purify water while growing nutrient-rich species as food sources, which aquatic food sources would be ideal for a habitat environment, and which species might provide an ideal test case for future studies aboard ISS. The aquatic species should be rapidly grown with high protein content and low launch mass requirements. Although there are numerous challenges and unknown technology gaps for maintaining aquaculture systems in reduced gravity environments, the benefit of employing such systems would be of great advantage towards creating a sustainable presence beyond Earth’s orbit for sustainable aquaculture.

Aquaculture↗

Creating a Wastewater Technology ‘Toolbox’ for Space Exploration ECLSS

Life Support Systems (LSS) are essential for manned spaceflight; without them, humans would not survive. Upcoming long-duration missions demand robust environmental control LSS (ECLSS) due to their insolation and limited prospect for immediate resupply. As part of LSS, water purification systems will require high reliability, sustainability, and efficiency due to transport mass limitations, because routine water delivery will be very difficult and costly to resupply future habitats. This suggests a highly effective treatment method and reuse of every wastewater source. A variety of wastewater streams are generated by crew, and although not all are currently treated, habitat success will require each stream to be treated and utilized as a ‘resource’ rather than 'waste’. These wastewater streams include human wastewater (urine, feces), food waste (plate waste, inedible plant biomass), humidity condensate, hygiene water (shower, oral, handwash), and laundry. Proven technologies are often relied upon due to long-term operations. For future, longer-term missions, this paradigm must shift to include technologies based on meeting mission requirements rather than sacrificing productivity in lieu of proven existing technology capabilities. Many physical, chemical, and biological water-processing technologies are proven and established for terrestrial applications. Herein, these technologies were collected into a ‘toolbox’ to perform possible functions towards effective water purification steps in reduced gravity. Selection criteria are dependent on approach (physical, chemical, or biological), complexity/components, terrestrial performance, and potential applicability to space life support. Utilization of this ‘toolbox’ approach provides a streamline methodology for technology development and down-selection into future architecture in direct response to the dynamic space life support requirements. Establishing the ‘toolbox’ also provides organized and efficient identification of the most appropriate technologies. From there, the technologies with the largest potential to be configured for mission requirements can be further developed and appropriately assessed. This presentation seeks to provide a comprehensive review of space life support water purification requirements and challenges, as well as to present a ‘toolbox’ methodology of available technologies to aid in the difficult process of selecting appropriate LSS water purification for short and long-term NASA mission architectures.

Luke Roberson↗

A Prototype Early Planetary Organic Processor Assembly (OPA) Based on Dual-Stage Anaerobic Membrane Bioreactor (AnMBR) for Fecal and Food Waste Treatment and Resource Recovery

Long-duration, deep-space exploration and habitation missions demand robust and reliable technologies to ensure crew health, safety, and mission success. Local food production will be essential for crew nutrition and morale. However, at $10,000/lb, the payload costs and mass/volume limitations to transport and provide the necessary resources, including fertilizer, for an anticipated 30-month mission become challenging over time. For mission success and sustainability, the Environmental Control and Life Support System (ECLSS) of the near future will need to recover resources from all “waste” sources and be near-closed loop. Organic wastes (e.g., fecal and food) offer a renewable source of C, N, P, water and other trace elements necessary to sustain crop production. However, these high solidwastes are often difficult to treatdue to factors includingheterogeneity, complexity, high organic strength, and the presence of pathogens. To date, there is no flight-ready technology capable of treating mixed organic wastes, creating a technology gap for future space missions. To address this need, a prototype Organic Processor Assembly (OPA) was developed through collaboration between the University of South Florida (USF) and NASA’s Kennedy Space Center (KSC). The OPA is based on the anaerobic membrane bioreactor (AnMBR), a hybrid technology coupling high-rate anaerobic digestion with membrane filtration. The system is designed for an early planetary base (EPB) scenario to aid in closing the resource recovery loop and decreaseresupply dependence. This presentation discusses initial research pertaining to: 1) design challenges in maximizing hydraulic/organic throughputandReliability, Availability, Maintainability, and Safety(RAMS)while minimizingmass and volume; 2) create capabilities for treating simulated high solids waste under steady and non-steady state conditions; and 3) measuresolids performance parameter(s). Future research and development pertaining to further optimization on system operation, performance, and expanded treatment capabilities arepresented.

Bioreactor↗

The membrane bioreactor (MBR): A hybrid technology for bioregenerative wastewater treatment and resource recovery in space

Extraplanetary surface habitat life support systems (LSS) on the Moon and Mars, as well as long-duration space travel, will require novel capabilities to withstand anticipated unique, harsh conditions. In order to provide safe, habitable environments for the crew, water purification and waste processing systems will be required to treat all sources of water (condensate, Sabatier, urine, hygiene, fecal, food waste) in order to achieve the necessary levels of recovery needed to sustain life over the long-duration missions. The ability to recycle organic wastes creates an opportunity to recover critical elements (e.g., C, H, O, N, P) for subsequent food production, water purification, and atmospheric regeneration. Bioregenerative systems mimic functions of nature in engineered systems, or bioreactors, utilizing combination of prokaryotes, eukaryotes and archaea. While these systems are commonly used on Earth for wastewater treatment, bioreactors for space travel face additional challenges. Terrestrial bioreactors often rely on gravitational settling of dense flocs and granules for cell retention. For micro- or partial-gravity environments, density differential alone will not be adequate for cell retention; a gravity-independent means for cell retention is crucial. The membrane bioreactor represents the state of the art in wastewater treatment. This hybrid system combines biological processes with membrane filtration to achieve performance beyond what each can accomplish individually. The complete cell retention in an MBR allows for the decoupling of hydraulic retention time (HRT) and solids retention time (SRT), which result in a high-thruput, compact, treatment system. The Bioregenerative Water Technology Team at NASA Kennedy Space Center and the University of South Florida has developed a bioregenerative platform based on the hybrid MBR technology. The overall architecture is compact, modular, flexible, and adaptable to mission evolutions. The main subsystems of the bioregenerative architecture include: 1) Anaerobic membrane bioreactor (AnMBR): Also termed the Organic processor assembly (OPA), the function of the AnMBR is to treat organic wastes such as fecal and food wastes. These wastes are characterized by a concentration of suspended solids comprised of carbohydrates, proteins and lipids. The assigned function of the AnMBR is to break down and covert suspended solids to biogas (methane, hydrogen and carbon dioxide), reduce effluent chemical oxygen demand (COD), liberate organically-bound nutrients, and remove pathogenic organisms. 2) Phototrophic membrane bioreactor (PMBR): The PMBR is comprised of a co-culture of microalgae and bacteria. The assigned function of the PMBR is to polish the permeate of the AnMBR to further remove dissolved organic carbon, manage nutrients (nitrogen transformation, load dampening), and perform air revitalization. 3) Food processor assembly (FPA): The FPA is a food production platform (prokaryotic or eukaryotic), fueled by outputs from the AnMBR, or PMBR. For the presentation, we will describe each step of the bioregenerative architecture, and present performance data from extended trials treating analog and real metabolic wastes.

Bioreactor↗

Alternative Treatment of Crew Wastewater Using a Hybrid Membrane Technology

Environmental Control and Life Support Systems (ECLSS) of future long-duration, deep-space human exploration missions should treat all “waste” streams for recovery and ideally by near closed-loop. Onboard the International Space Station (ISS), the Water Recovery System (WRS) does not treat urine and gray water to recover elements beyond water and utilizes physical-chemical technologies that operate with single-use and hazardous consumables. Urine offers a renewable source of nitrogen and other trace elements that can support sustainable crop production. In response to the lack of flight ready technologies capable of treating urine and gray water for water and nutrient recovery, a Suspended Aerobic Membrane Bioreactor (SAMBR) is under development between the University of South Florida and Kennedy Space Center. SAMBR is optimized for an early planetary base/partial gravity habitat and serves as a hybrid alternative to currently utilized urine treatment technologies and support closing the resource recovery loop. With its ECLSS minded form factor and modular design, SAMBR’s operation can be customized to suit the treatment objectives (i.e., nitrogen conversion) at that time. This proceeding presents preliminary research pertaining to: 1) design challenges in maximizing hydraulic throughput while minimizing mass and volume of the assembly; 2) capabilities for treating high nitrogen waste under steady and non-steady state conditions; and 3) measured performance parameters such chemical oxygen demand (COD), nitrogen conversion, nutrients, turbidity, and system throughput. Future research and development pertaining to further optimization on system safety, reliability, and expanded treatment capabilities will also be presented.

Membrane Filtration↗