Search NASA⌕ Search

Engineering topics

Lunde, A. R.

Publications and source records attributed to Lunde, A. R..

Application of an electron beam facility for heat transfer measurements in capillary tubes

A unique method was developed for the determination of heat transfer coefficients for water flowing through capillary tubes using a rastered electron beam heater. Heat flux levels of 150 and 500 watts/sq cm were provided on the top surface of four square tubes. Temperature gradient along the tube length and mass flow rates versus pressure drop were measured.

Lunde, A. R.↗

Uniform high irradiance source

New 50 Kw xenon short arc lamp mounted within elliptical collector provides irradiance levels up to 4.4 x 10 to the 7th power watts/sq m with non-uniformity ratio of 3.30. Energy mixer or light pipe between lamp source and target improves non-uniformity to required ratio.

Lunde, A. R.↗

Development of a high irradiance source

Irradiance levels up to 17.27 sq in/sec. with a nonuniformity ratio of 1.07 have been developed to simulate high heat flux loads on the surface of difference materials. This has been achieved by an arc image furnace utilizing a 50 kw xenon short arc lamp mounted within an elliptical collector.

Lunde, A. R.↗