Engineering topics
Publications and source records attributed to Lundquist, Tryg.
Microalgal biomass production has been proposed for many years for the low-cost production of foods, feeds, fuels and other bio-products, and to treat wastewaters, while reducing greenhouse gas emissions, with raceway ponds the most economical technology for cultivating microalgae.
Microalgal biomass production has been proposed for many years for the low-cost production of foods, feeds, fuels and other bio-products, and to treat wastewaters, while reducing greenhouse gas emissions, with raceway ponds the most economical technology for cultivating microalgae.
Microalgal biomass production has been proposed for many years for the low-cost production of foods, feeds, fuels and other bio-products, and to treat wastewaters, while reducing greenhouse gas emissions, with raceway ponds the most economical technology for cultivating microalgae.
Microalgae cultivation processes exist only for a few species used in commercial applications. Their domestication is still in its infancy, with major advances required, specifically to overcome limiting factors in microalgae production. The goal is to develop superior strains without the need of genetic technologies that would require lengthy regulatory permits, and often limit consumer acceptance. Adaptive Laboratory Evolution techniques, alone or in conjunction with sexual recombination, can allow for rapid develop of improved strains and their industrial production. Approaches include increased photon utilization efficiency by cultures operating under full sunlight conditions due to higher light saturation levels, allowing for higher productivities under outdoor conditions. Decades of research yielded some promising results under controlled conditions with a few specific mutant strains. However, these failed to achieve the anticipated higher productivities in actual algal mass cultures, in part due to the inability of mutations to overcome photoinhibition, reactive oxygen species, and other pleiotropic impacts on photosynthesis.
Microalgae cultivation processes have been developed for the production of a variety of bioproducts, however currently only a few species are used in commercial applications. Their domestication, that is strain improvements, is still in its infancy, with major advances required, specifically to maximize biomass productivity a limiting factor in microalgae production. This requires a deep understanding of algal biology, in particular to develop superior strains without the need of genetic technologies that would require lengthy regulatory permits, and often limit consumer acceptance. Adaptive Laboratory Evolution techniques, alone or in conjunction with sexual recombination, can allow for rapid develop of improved strains and their industrial production. Light harvesting antenna reduction has been a major approach to achieve increased photon utilization efficiency by cultures operating under full sunlight conditions due to higher light saturation levels, allowing for higher productivities under outdoor conditions. Decades of research yielded some promising results under controlled conditions with a few specific mutant strains. However, these failed to achieve the anticipated higher productivities in actual algal mass cultures, in part due to the inability of single mutations to overcome photoinhibition, reactive oxygen species, and other pleiotropic impacts on the complex metabolic processes of photosynthesis. Higher productivity strains will require multiple genetic improvements. We report on recent Adaptive Laboratory Evolution with the green alga Scenedesmus obliquus resulting in higher biomass productivity in open pond cultivation. Coupling our approach with sexual recombination and genome sequencing provides a path to algal domestication suitable for large-scale, low-cost biomass production.
Characteristics of solid residuals generated during hydrothermal liquefaction (HTL) of biomass are reported to establish disposition options for these residuals to reduce liability or barriers to commercialization of HTL. HTL solids from pilot scale are reported and compared to existing HTL solids literature for a variety of biomass feedstocks and HTL configurations, noting differences among literature HTL solids due to solids collection methods. Reported analyses include CHNOS, moisture, ash, inorganics by Inductively Coupled Plasma (ICP), and High Heating Value (HHV). HTL solids are determined to be substantially compatible with U.S. Environmental Protection Agency (EPA) disposal regulations within existing data. Disposition and valorization routes are identified, yet combustion as valorization is determined to be not economically beneficial. Further, research gaps are identified, which include the need for future research to be performed on HTL solids that are representative of a continuous, commercializable flowsheet; verification that specific HTL solids meet EPA disposal requirements; exploration of valorization options; and the need for invention of continuous HTL solids separations/management.
Microalgae can contribute to the decarbonization of wastewater treatment by municipalities, industries and agriculture, by substituting sunlight for energy intensive conventional treatment processes, while capturing nutrients and carbon in the algal biomass. The carbon fixed into the algal biomass can be converted to renewable natural gas (RNG) using anaerobic digestion or into renewable diesel and sustainable aviation fuel (SAF) using hydrothermal liquefaction (HTL), with greatly reduce the carbon footprints compared to conventional fuels. Bioplastics, biofertilizers and other bioproducts from microalgae biomass also provide potential benefits in greenhouse gas (GHG) reduction and domestic supply chains. Microalgae technologies can counter eutrophication caused by harmful algal blooms by recovering nutrients, N and P, from wastewaters, and even from very low nutrient concentrations found in surface waters. CO2 is required in microalgae cultivation and wastewater treatment to support maximal rates of the photosynthesis, with the CO2 obtained from the wastes themselves, other local sources or even atmospheric CO2. Greenhouse gas mitigation with microalgae processes is based on life cycle assessments, comparing such green processes with current energy intensive wastewater treatment, and nutrient reduction technologies. Microalgae technologies are specifically relevant to smaller, often disadvantaged, communities, where currently about 5,000 algae wastewater treatment ponds are operated by public utilities with many more are operated by industries. However, many, if not most, of these pond facilities require urgent technology upgrades to achieve the potential and goals of low cost GHG mitigation and efficient nutrient recycling. MicroBio Engineering Inc. is developing and has demonstrated several technologies that combine innovative carbon mitigation and decarbonization technologies for a circular economy, with longer-term potential for large-scale biofuels and biofertilizer production.
Microalgae can contribute to the decarbonization of wastewater treatment by municipalities, industries and agriculture, by substituting sunlight for energy intensive conventional treatment processes, while capturing nutrients and carbon in the algal biomass. The carbon fixed into the algal biomass can be converted to renewable natural gas (RNG) using anaerobic digestion or into renewable diesel and sustainable aviation fuel (SAF) using hydrothermal liquefaction (HTL), with greatly reduce the carbon footprints compared to conventional fuels. Bioplastics, biofertilizers and other bioproducts from microalgae biomass also provide potential benefits in greenhouse gas (GHG) reduction and domestic supply chains. Microalgae technologies can counter eutrophication caused by harmful algal blooms by recovering nutrients, N and P, from wastewaters, and even from very low nutrient concentrations found in surface waters. CO2 is required in microalgae cultivation and wastewater treatment to support maximal rates of the photosynthesis, with the CO2 obtained from the wastes themselves, other local sources or even atmospheric CO2. Greenhouse gas mitigation with microalgae processes is based on life cycle assessments, comparing such green processes with current energy intensive wastewater treatment, and nutrient reduction technologies. Microalgae technologies are specifically relevant to smaller, often disadvantaged, communities, where currently about 5,000 algae wastewater treatment ponds are operated by public utilities with many more are operated by industries. However, many, if not most, of these pond facilities require urgent technology upgrades to achieve the potential and goals of low cost GHG mitigation and efficient nutrient recycling. MicroBio Engineering Inc. is developing and has demonstrated several technologies that combine innovative carbon mitigation and decarbonization technologies for a circular economy, with longer-term potential for large-scale biofuels and biofertilizer production.
Microalgae can contribute to the decarbonization of wastewater treatment by municipalities, industries and agriculture, by substituting sunlight for energy intensive conventional treatment processes, while capturing nutrients and carbon in the algal biomass. The carbon fixed into the algal biomass can be converted to renewable natural gas (RNG) using anaerobic digestion or into renewable diesel and sustainable aviation fuel (SAF) using hydrothermal liquefaction (HTL), with greatly reduce the carbon footprints compared to conventional fuels. Bioplastics, biofertilizers and other bioproducts from microalgae biomass also provide potential benefits in greenhouse gas (GHG) reduction and domestic supply chains. Microalgae technologies can counter eutrophication caused by harmful algal blooms by recovering nutrients, N and P, from wastewaters, and even from very low nutrient concentrations found in surface waters. CO2 is required in microalgae cultivation and wastewater treatment to support maximal rates of the photosynthesis, with the CO2 obtained from the wastes themselves, other local sources or even atmospheric CO2. Greenhouse gas mitigation with microalgae processes is based on life cycle assessments, comparing such green processes with current energy intensive wastewater treatment, and nutrient reduction technologies. Microalgae technologies are specifically relevant to smaller, often disadvantaged, communities, where currently about 5,000 algae wastewater treatment ponds are operated by public utilities with many more are operated by industries. However, many, if not most, of these pond facilities require urgent technology upgrades to achieve the potential and goals of low cost GHG mitigation and efficient nutrient recycling. MicroBio Engineering Inc. is developing and has demonstrated several technologies that combine innovative carbon mitigation and decarbonization technologies for a circular economy, with longer-term potential for large-scale biofuels and biofertilizer production.
This Final Technical Report for Award DE-FE0031717 is a non-confidential overview of the algae-based CO 2 utilization research project carried out by MicroBio Engineering Inc. (MBE) and project partners - the Orlando Utilities Commission-Stanton Energy Center (OUC-SEC), California Polytechnic University (Cal Poly, San Luis Obispo), University of Central Florida (UCF), and Global Thermostat LLC. The project ran from January 1 2019 to March 2022.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
. Premium Animal Feed from Filamentous Algae Grown on Florida Power Plant CO2