Search NASA⌕ Search

Engineering topics

Luo, Jiancheng

Publications and source records attributed to Luo, Jiancheng.

Covalent adaptable polymer networks with CO 2 -facilitated recyclability

Cross-linked polymers with covalent adaptable networks (CANs) can be reprocessed under external stimuli owing to the exchangeability of dynamic covalent bonds. Optimization of reprocessing conditions is critical since increasing the reprocessing temperature costs more energy and even deteriorates the materials, while reducing the reprocessing temperature via molecular design usually narrows the service temperature range. Exploiting CO 2 gas as an external trigger for lowering the reprocessing barrier shows great promise in low sample contamination and environmental friendliness. Herein, we develop a type of CANs incorporated with ionic clusters that achieve CO 2 -facilitated recyclability without sacrificing performance. The presence of CO 2 can facilitate the rearrangement of ionic clusters, thus promoting the exchange of dynamic bonds. The effective stress relaxation and network rearrangement enable the system with rapid recycling under CO 2 while retaining excellent mechanical performance in working conditions. This work opens avenues to design recyclable polymer materials with tunable dynamics and responsive recyclability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ductile adhesive elastomers with force-triggered ultra-high adhesion strength

Elastomers play a vital role in many forthcoming advanced technologies in which their adhesive properties determine materials’ interface performance. Despite great success in improving the adhesive properties of elastomers, permanent adhesives tend to stick to the surfaces prematurely or result in poor contact depending on the installation method. Thus, elastomers with on-demand adhesion that is not limited to being triggered by UV light or heat, which may not be practical for scenarios that do not allow an additional external source, provide a solution to various challenges in conventional adhesive elastomers. Herein, we report a novel, ready-to-use, ultra high-strength, ductile adhesive elastomer with an on-demand adhesion feature that can be easily triggered by a compression force. The precursor is mainly composed of a capsule-separated, two-component curing system. After a force-trigger and curing process, the ductile adhesive elastomer exhibits a peel strength and a lap shear strength of 1.2 × 10 4 N m -1 and 7.8 × 10 3 kPa, respectively, which exceed the reported values for advanced ductile adhesive elastomers. The ultra-high adhesion force is attributed to the excellent surface contact of the liquid-like precursor and to the high elastic modulus of the cured elastomer that is reinforced by a two-phase design. In conclusion, incorporation of such on-demand adhesion into an elastomer enables a controlled delay between installation and curing so that these can take place under their individual ideal conditions, effectively reducing the energy cost, preventing failures, and improving installation processes.

36 MATERIALS SCIENCE↗

A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization

Dynamic polymers with both physical interactions and dynamic covalent bonds exhibit superior performance while achieving such dry polymers in an efficient manner remains a challenge. Herein, we report a novel organic solvent quenched polymer synthesis using a natural molecule, i.e., thioctic acid (TA), which has both dynamic disulfide bond and carboxylic acid. The effects of the solvent types and concentrations along with reaction times on the proposed reaction have been thoroughly explored for polymer synthesis. Solid-state proton nuclear magnetic resonance ( 1 H NMR) and first-principles simulations are carried out to investigate the reaction mechanism. It shows that the chlorinated solvent can efficiently stabilize and mediate the depolymerization of poly(TA) which is more kinetically favorable upon lowering the temperature. Attributed to the numerous dynamic covalent disulfide bonds and noncovalent hydrogen bonding, the obtained poly(TA) shows high extensibility, self-healable and re-processable properties. It can also be employed as an efficient adhesive even on a Teflon surface and 3D printed using the fused deposition modeling (FDM) technique. This new polymer synthesis approach on using organic solvents as catalysts along with the unique reaction mechanism provides a new pathway for efficient polymer synthesis, especially for those multi-functional dynamic polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surpassing the stiffness-extensibility trade-off of elastomers via mastering the hydrogen-bonding clusters

The current paradigm of elastomer design typically falls into the trade-off between stiffness and extensibility. With a few reports on circumventing this trade-off behavior, e.g., increasing Young's modulus without sacrificing extensibility, the design principles to achieve improvements in both stiffness and extensibility have rarely been demonstrated. Herein, with a model system, i.e., cross-linked polydimethylsiloxane (PDMS) network, we demonstrate two approaches that can surpass the stiffness-extensibility trade-off and provide significant improvement in both parameters. Such an achievement is realized by introducing rationally arranged hydrogen-bonding units, i.e., ureidopyrimidone (UPy), leading to simultaneously improved Young's modulus and extensibility up to 158 and 3 times, respectively. Based on the experimental results, we also propose a microscopic picture of network rearrangement during the stretching process. Moreover, using this picture, we further improved Young's modulus of the elastic network without affecting its extensibility through mastering the distribution/topology of UPy clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly Stretchable, Ultratough, and Multifunctional Poly(vinyl chloride)-Based Plastics via a Green, Star-Shaped Macromolecular Additive

As one of the most prolifically produced plastics in the world, poly(vinyl chloride) (PVC) suffers from mechanical brittleness and low toughness. Compared with traditional phthalate-type plasticizers, poly(ε-caprolactone) (PCL)-based plasticizers are especially attractive due to their “green” nature and capabilities to achieve improved physical properties. Herein, a stretchable and ultratough PVC-based plastic was achieved by a star-shaped PCL copolymer with a rigid, amino-containing, branched polylactide (N-BPLA) core and a soft PCL shell, that is, RN-SPCLs. With an optimal feed ratio of the CL monomer and N-BPLA core, the RN-SPCL2 can efficiently lower the glass transition temperature (T g ) of PVC plastics, achieving the transition from the “glassy” to “rubbery” state at ambient temperature. The obtained RN-SPCL2/PVC not only shows high extensibility, that is, 453%, but also maintains close to 80% of tensile strength of neat PVC, that is, 30.1 MPa, which is much higher than the previously reported plasticized PVCs. Its overall toughness reaches 92.7 MJ/m 3 , being more than 50-fold higher than neat PVC and 2 to 3 times higher than linear PCL or dibutyl phthalate plasticized PVCs. The important role of star-shaped architecture with a rigid core and flexible PCL shell for RN-SPCL2 in achieving highly stretchable and ultratough PVC plastics is systematically investigated. More interestingly, the as-prepared RN-SPCLs also endow PVC plastics with photoluminescence property and allow homogeneous dispersion of nanosized TiO 2 for significantly enhancing the anti-UV capability.

36 MATERIALS SCIENCE↗

Accurate Determination of the Quantity and Spatial Distribution of Counterions around a Spherical Macroion

Abstract The accurate distribution of countercations (Rb + and Sr 2+ ) around a rigid, spherical, 2.9‐nm size polyoxometalate cluster, {Mo 132 } 42− , is determined by anomalous small‐angle X‐ray scattering. Both Rb + and Sr 2+ ions lead to shorter diffuse lengths for {Mo 132 } than prediction. Most Rb + ions are closely associated with {Mo 132 } by staying near the skeleton of {Mo 132 } or in the Stern layer, whereas more Sr 2+ ions loosely associate with {Mo 132 } in the diffuse layer. The stronger affinity of Rb + ions towards {Mo 132 } than that of Sr 2+ ions explains the anomalous lower critical coagulation concentration of {Mo 132 } with Rb + compared to Sr 2+ . The anomalous behavior of {Mo 132 } can be attributed to majority of negative charges being located at the inner surface of its cavity. The longer anion–cation distance weakens the Coulomb interaction, making the enthalpy change owing to the breakage of hydration layers of cations more important in regulating the counterion–{Mo 132 } interaction.

Chen, Jiahui↗

Unraveling the Effects of Cobalt on Crystal Growth and Solution Behavior of Nb 6 P 2 W 12 -based Dimeric Clusters

We report the synthesis, characterization, and solution self-assembly of plenary Nb 6 P 2 W 12 -based transition-metal substituted polyoxometalate, which is obtained by simply adding transition metals (Co 2+ ) into aqueous solution containing cluster [(NbO 2 ) 6 P 2 W 12 O 56 ] 12- , which is obtained by an in situ synthetic method. The incorporation of Co 2+ ions significantly affects the crystal structure, resulting in the formation of a 1D chain-like crystal and the first example of a niobotungstate-based cobalt derivative cluster. The behavior and stability of this cluster in solution are confirmed by time-resolved static light scattering, dynamic light scattering, small-angle X-ray scattering, and electrospray mass spectrometry studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Distinctive Trend of Metal Binding Affinity via Hydration Shell Breakage in Nanoconfined Cavity

Here, we report a distinctive trend in the binding affinity of metal cations when they interact with lacunary Keggin-type polyoxometalate K 7 [α-PW 11 O 39 ] clusters in aqueous media. The binding affinity of metal cations follows the special trends of Li + > Na + > K + for monovalent cations and Mg 2+ > Ca 2+ > Sr 2+ > Ba 2+ for divalent cations, completely reversed from the common trends of Li + < Na + < K + and Mg 2+ < Ca 2+ < Sr 2+ < Ba 2+ for macroion–counterion ion-pair formation in dilution solution. Isothermal titration calorimetry and NMR measurements confirm that the hydration shells of metal cations are significantly broken during the interaction in the nanoscale cavity, making the binding affinity stronger for the cations with smaller ionic sizes instead of hydrated sizes. Furthermore, the same phenomenon is observed for the lacunary Dawson-type clusters, which contain well-defined cavity in their structures as well, demonstrating the universality of this reverse trend and its connection to nanoconfinement effect in small submolecular cavities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sequence isomeric giant surfactants with distinct self-assembly behaviors in solution

We have created and synthesized a pair of sequence isomeric giant surfactants based on polystyrene (PS) and polyhedral oligomeric silsesquioxane (POSS) nanoparticles. Despite the fact these two macromolecules possess identical compositions as “sequence isomers”, the distinctly arranged POSS sequences lead to different molecular packing conformations, and further induce distinguished self-assembly behaviors in DMF/water solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Cation–π Interaction on Macroionic Self‐Assembly

Abstract A series of rod‐shaped polyoxometalates (POMs) [Bu 4 N] 7 [Mo 6 O 18 NC(CH 2 O) 3 MnMo 6 O 18 (OCH 2 ) 3 CNMo 6 O 18 ] and [Bu 4 N] 7 [ArNMo 6 O 17 NC(CH 2 O) 3 MnMo 6 O 18 (OCH 2 ) 3 CNMo 6 O 17 NAr] (Ar=2,6‐dimethylphenyl, naphthyl and 1‐methylnaphthyl) were chosen to study the effects of cation–π interaction on macroionic self‐assembly. Diffusion ordered spectroscopy (DOSY) and isothermal titration calorimetry (ITC) techniques show that the binding affinity between the POMs and Zn 2+ ions is enhanced significantly after grafting aromatic groups onto the clusters, leading to the effective replacement of tetrabutylammonium counterions (TBAs) upon the addition of ZnCl 2 . The incorporation of aromatic groups results in the significant contribution of cation–π interaction to the self‐assembly, as confirmed by the opposite trend of assembly size vs. ionic strength when compared with those without aromatic groups. The small difference between two aromatic groups toward the Zn 2+ ions is amplified after combining with the clusters, which consequently triggers the self‐recognition behavior between two highly similar macroanions.

Luo, Jiancheng↗

Effect of Cation-π Interaction on Macroionic Self-Assembly

Here, a series of rod–shaped polyoxometalates (POMs) [Bu 4 N] 7 [Mo 6 O 18 NC(CH 2 O) 3 MnMo 6 O 18 (OCH 2 ) 3 CNMo 6 O 18 ] and [Bu 4 N] 7 [ArNMo 6 O 17 NC(CH 2 O) 3 MnMo 6 O 18 (OCH 2 ) 3 CNMo 6 O 17 NAr] (Ar=2,6–dimethylphenyl, naphthyl and 1–methylnaphthyl) were chosen to study the effects of cation–π interaction on macroionic self–assembly. Diffusion ordered spectroscopy (DOSY) and isothermal titration calorimetry (ITC) techniques show that the binding affinity between the POMs and Zn 2+ ions is enhanced significantly after grafting aromatic groups onto the clusters, leading to the effective replacement of tetrabutylammonium counterions (TBAs) upon the addition of ZnCl 2 . The incorporation of aromatic groups results in the significant contribution of cation–π interaction to the self–assembly, as confirmed by the opposite trend of assembly size vs. ionic strength when compared with those without aromatic groups. The small difference between two aromatic groups toward the Zn 2+ ions is amplified after combining with the clusters, which consequently triggers the self–recognition behavior between two highly similar macroanions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗