Engineering topics
Luo, Jun
Publications and source records attributed to Luo, Jun.
General synthesis of two-dimensional van der Waals heterostructure arrays
Not provided.
Ambient Synthesis of Single‐Atom Catalysts from Bulk Metal via Trapping of Atoms by Surface Dangling Bonds
Abstract Single‐atom catalysts (SACs) feature the maximum atom economy and superior performance for various catalysis fields, attracting tremendous attention in materials science. However, conventional synthesis of SACs involves high energy consumption at high temperature, complicated procedures, a massive waste of metal species, and poor yields, greatly impeding their development. Herein, a facile dangling bond trapping strategy to construct SACs under ambient conditions from easily accessible bulk metals (such as Fe, Co, Ni, and Cu) is presented. When mixing graphene oxide (GO) slurry with metal foam and drying in ambient conditions, the M 0 would transfer electrons to the dangling oxygen groups on GO, obtaining M δ+ (0 < δ < 3) species. Meanwhile, M δ+ coordinates with the surface oxygen dangling bonds of GO to form MO bonds. Subsequently, the metal atoms are pulled out of the metal foam by the MO bonds under the assistance of sonication to give M SAs/GO materials. This synthesis at room temperature from bulk metals provides a versatile platform for facile and low‐cost fabrication of SACs, crucial for their mass production and practical application in diverse industrial reactions.
Realization of higher thermoelectric performance by dynamic doping of copper in n-type PbTe
It is a great challenge to optimize a material's thermoelectric performance due to the strong correlation between its thermoelectric-transport properties, especially the electrical-transport properties. Optimizing the peak zT using a constant carrier concentration is commonly adopted because of the difficulty in realizing the optimum temperature-dependent carrier concentration, but this is not meaningful for real applications, in which the average zT value over the working temperature range is much more important. Here we propose an effective strategy involving the dynamic doping effect of interstitial Cu atoms to fully optimize the electrical-transport properties of n-type PbTe over a wide temperature range. By using Cu intercalation, the temperature-dependent carrier concentration of PbTe is found to well match the theoretically optimal profile. Furthermore, high carrier mobility is largely maintained because the dynamic behavior of the interstitial Cu does not alter the band structure and therefore change the effective mass. Consequently, a peak zT of ~1.3 and a calculated leg efficiency of 12% were achieved for the sample with 0.2 at% Cu. Based on our findings, we further proposed a concept of ‘interstitial engineering’ to reinforce the dynamic doping effect, which is of fundamental importance for optimizing the thermoelectric properties.
Single-atom tailoring of platinum nanocatalysts for high-performance multifunctional electrocatalysis
Platinum-based nanocatalysts play a crucial role in various electrocatalytic systems that are important for renewable, clean energy conversion, storage and utilization. However, the scarcity and high cost of Pt seriously limit the practical application of these catalysts. Decorating Pt catalysts with other transition metals offers an effective pathway to tailor their catalytic properties, but often at the sacrifice of the electrochemical active surface area (ECSA). Here we report a single-atom tailoring strategy to boost the activity of Pt nanocatalysts with minimal loss in surface active sites. By starting with PtNi alloy nanowires and using a partial electrochemical dealloying approach, we create single-nickel-atom-modified Pt nanowires with an optimum combination of specific activity and ECSA for the hydrogen evolution, methanol oxidation and ethanol oxidation reactions. The single-atom tailoring approach offers an effective strategy to optimize the activity of surface Pt atoms and enhance the mass activity for diverse reactions, opening a general pathway to the design of highly efficient and durable precious metal-based catalysts.
Improvement of Al/Steel Tungsten Inert Gas Welding–Brazing Joint by High-Energy Shot Peening
High-energy shot peening treatment was applied to improve the Al/steel tungsten inert gas welding–brazing lap joint. The mechanical properties and microstructure evolution of the joint were investigated. Results showed that the mechanical properties of weld were evidently reinforced due to microstructure transformation of joint surface layer. The grain structure in the joint surface layer was distorted and refined. Large compressive residual stress was introduced into the joint surface, and its hardness obviously increased due to strain hardening. When the peening pressure was 0.15 MPa, the tensile shear strength of the joint reached the maximum value (199.6 MPa), which was 16.5% higher than that of the as-welded joint.
Manipulation of Ni Interstitials for Realizing Large Power Factor in TiNiSn-Based Materials
Not provided.
Atomically Dispersed Molybdenum Catalysts for Efficient Ambient Nitrogen Fixation
Abstract NH 3 synthesis by the electrocatalytic N 2 reduction reaction (NRR) under ambient conditions is an appealing alternative to the currently employed industrial method—the Haber–Bosch process—that requires high temperature and pressure. We report single Mo atoms anchored to nitrogen‐doped porous carbon as a cost‐effective catalyst for the NRR. Benefiting from the optimally high density of active sites and hierarchically porous carbon frameworks, this catalyst achieves a high NH 3 yield rate (34.0±3.6 μg h −1 mg cat. −1 ) and a high Faradaic efficiency (14.6±1.6 %) in 0.1 m KOH at room temperature. These values are considerably higher compared to previously reported non‐precious‐metal electrocatalysts. Moreover, this catalyst displays no obvious current drop during a 50 000 s NRR, and high activity and durability are achieved in 0.1 m HCl. The findings provide a promising lead for the design of efficient and robust single‐atom non‐precious‐metal catalysts for the electrocatalytic NRR.
Discovery of TaFeSb-based half-Heuslers with high thermoelectric performance
Discovery of thermoelectric materials has long been realized by the Edisonian trial and error approach. However, recent progress in theoretical calculations, including the ability to predict structures of unknown phases along with their thermodynamic stability and functional properties, has enabled the so-called inverse design approach. Compared to the traditional materials discovery, the inverse design approach has the potential to substantially reduce the experimental efforts needed to identify promising compounds with target functionalities. By adopting this approach, here we have discovered several unreported half-Heusler compounds. Among them, the p-type TaFeSb-based half-Heusler demonstrates a record high ZT of ~1.52 at 973 K. Additionally, an ultrahigh average ZT of ~0.93 between 300 and 973 K is achieved. Such an extraordinary thermoelectric performance is further verified by the heat-to-electricity conversion efficiency measurement and a high efficiency of ~11.4% is obtained. Our work demonstrates that the TaFeSb-based half-Heuslers are highly promising for thermoelectric power generation.
Combined Search for a Lorentz-Violating Force in Short-Range Gravity Varying as the Inverse Sixth Power of Distance
Precision measurements of the inverse-square law via experiments on short-range gravity provide sensitive tests of Lorentz symmetry. A combined analysis of data from experiments at the Huazhong University of Science and Technology and Indiana University sets simultaneous limits on all 22 coefficients for Lorentz violation correcting the Newton force law as the inverse sixth power of distance. Furthermore, results are consistent with no effect at the level of 10 –12 m 4 .
CircNUP214 sponges miR-145 to promote the expression of ZEB2 in thyroid cancer cells
Highlights: • CircNUP214 plays oncogenic role in papillary thyroid cancer cells. • Inhibition of circNUP214 impairs the proliferation, migration, invasion and tumorgenesis of papillary thyroid cancer cells. • CircNUP214 acted as a sponge of miR-145 and ZEB2 was a functional target of miR-145. • CircNUP214/miR-145/ZEB2 axis plays critical roles in papillary thyroid cancer pathogenesis. Circular (circ)RNAs have been implicated in cancer development. However, few studies have examined the role of circRNAs in papillary thyroid cancer (PTC). In this study we found that circNUP214 was upregulated in clinical PTC specimens relative to adjacent normal tissue. In vitro analyses showed that circNUP214 knockdown suppressed PTC cell proliferation, invasion, migration, and tumorigenesis. A luciferase reporter assay confirmed that circNUP214 binds to miR-145, which directly targets zinc finger E-box binding homeobox (ZEB)2. Thus, circNUP214 may play an oncogenic role in PTC by acting as a sponge for miR-145, leading to upregulation of ZEB2. These results provide evidence for a new regulatory mechanism in PTC development involving circNUP214, which can serve as a potential therapeutic target in PTC treatment.
Atomically Dispersed Molybdenum Catalysts for Efficient Ambient Nitrogen Fixation
NH 3 synthesis by the electrocatalytic N 2 reduction reaction (NRR) under ambient conditions is an appealing alternative to the currently employed industrial method—the Haber–Bosch process—that requires high temperature and pressure. We report here single Mo atoms anchored to nitrogen-doped porous carbon as a cost-effective catalyst for the NRR. Benefiting from the optimally high density of active sites and hierarchically porous carbon frameworks, this catalyst achieves a high NH 3 yield rate (34.0±3.6 μg NH 3 h -1 mg cat. -1 ) and a high Faradaic efficiency (14.6±1.6 %) in 0.1 m KOH at room temperature. These values are considerably higher compared to previously reported non-precious-metal electrocatalysts. Moreover, this catalyst displays no obvious current drop during a 50 000 s NRR, and high activity and durability are achieved in 0.1 m HCl. The findings provide a promising lead for the design of efficient and robust single-atom non-precious-metal catalysts for the electrocatalytic NRR.
Metals in paints on chopsticks: Solubilization in simulated saliva, gastric, and food solutions and implication for human health
Highlights: • Extremely high metal concentrations were observed in paints on some chopsticks. • Significantly higher metal concentration in paints on stainless steel than wood chopsticks. • Higher metal concentration in red and green paints. • Significantly higher metal migration in 0.07 M HCl and 1% citric acid than in saliva. • Extremely high Pb and Cd in stainless steel chopsticks were health risk. Paints are often used on chopsticks, however, a paucity of studies has assessed metals in the paints and the associated health risk. In this study, total Pb, Cd, Cr, Co, and Ni concentrations in paints were assessed for 72 wood and 29 stainless steel chopsticks with different colors while metal solubilization from paints in simulated saliva, 0.07 M HCl, and 1% citric acid solutions was measured for 9 samples having total Pb > 90 mg kg{sup –1}, representing exposure scenarios of mouthing, incidental paint ingestion, and metal migration in food. Results showed that Pb (0.12–500,000 mg kg{sup –1}), Cd (0.002–120,000 mg kg{sup –1}), Cr (2.2–8400 mg kg{sup –1}), Co (0.004–2600 mg kg{sup –1}), and Ni (0.10–150,000 mg kg{sup –1}) concentrations varied considerably among paint samples. Most samples showed low metal concentrations, however, high metal concentrations were observed in red and green paints on stainless steel chopsticks, while paints on wood chopsticks showed lower metal concentrations. Estimation of daily metal intakes incorporating metal solubilization data in saliva, 0.07 M HCl, and 1% citric acid solutions suggested that the health risk via saliva contact was negligible, while unacceptable health risk was observed for Pb and Cd via their solubilization in 0.07 M HCl and 1% citric acid solutions from paints with high Pb and Cd concentrations. To avoid Pb and Cd exposure, use of metal-based paints on chopsticks should be banned, particularly in countries where food is regularly consumed with chopsticks.
Exponential surface melting of Cu nanoparticles observed by in-situ TEM
Highlights: • For the first time, surface melting rate of nano-scale Cu particles was investigated by in situ TEM. • The surface melting rates of different morphologies, such as platform or sphere, are different. • Different from ln[Tm/(Tm − T)] or (Tm − T){sup −r} (r is a constant), the actual surface melting of Cu nanoparticles is exponential. - Abstract: In surface melting, a liquid film forms on the crystal surface even below its melting point (T{sub m}). Currently, surface melting theory generally assumes a crystal with an infinite surface, and it is believed that the surface melting layer thickens according to ln [T{sub m}/(T{sub m} − T)] or (T{sub m} − T){sup −r} (r is a constant). In this work, we observed the melting of Cu nanoparticles with diameters of about 30 nm at 890 °C using in-situ heating high-resolution transmission electron microscopy (HRTEM). We found that the thickness of the melting layer on the surface of the Cu nanoparticles increased exponentially. The growth pattern of the melting layer was notably different from the results of previous simulations. This discovery may enhance our understanding of the melting mechanism of Cu nanomaterials.
Breaking the scaling relationship via thermally stable Pt/Cu single atom alloys for catalytic dehydrogenation
Here, noble-metal alloys are widely used as heterogeneous catalysts. However, due to the existence of scaling properties of adsorption energies on transition metal surfaces, the enhancement of catalytic activity is frequently accompanied by side reactions leading to a reduction in selectivity for the target product. Herein, we describe an approach to breaking the scaling relationship for propane dehydrogenation, an industrially important reaction, by assembling single atom alloys (SAAs), to achieve simultaneous enhancement of propylene selectivity and propane conversion. We synthesize γ-alumina-supported platinum/copper SAA catalysts by incipient wetness co-impregnation method with a high copper to platinum ratio. Single platinum atoms dispersed on copper nanoparticles dramatically enhance the desorption of surface-bounded propylene and prohibit its further dehydrogenation, resulting in high propylene selectivity (~90%). Unlike previous reported SAA applications at low temperatures (<400 °C), Pt/Cu SAA shows excellent stability of more than 120 h of operation under atmospheric pressure at 520 °C.
CBFA2T2 is required for BMP-2-induced osteogenic differentiation of mesenchymal stem cells
Highlights: • CBFA2T2 expression was upregulated by BMP-2 treatment during osteogenesis of MSCs. • Knockdown of CBFA2T2 blunted the BMP-2-induced osteogenic differentiation of MSCs. • Knockdown of CBFA2T2 promoted expression of EHMT1 in BMP-2-treated mBMSCs. • Knockdown of CBFA2T2 increased H3K9me2 levels at promoter of Runx2. Bone morphogenetic protein (BMP) signaling is one of the essential pathways involved in osteogenic differentiation of mesenchymal stem cells (MSCs) and regulation of bone formation. While BMP-2 has been approved for clinic use, the underlying mechanisms remain not fully understood. In this study, we found co-repressor CBFA2T2 (core-binding factor, runt domain, alpha subunit 2, translocated to, 2) expression was significantly upregulated in response to BMP-2 treatment during osteogenic differentiation of human dental pulp stem cells (hDPSCs) and mouse bone marrow stromal cells (mBMSCs). siRNA-mediated knockdown of CBFA2T2 blunted the BMP-2-induced allkaline phosphatase (ALP) activity, mineralization of extracelluar matrix (ECM), and expression of osteogenic related genes in both hDPSCs and mBMSCs. Mechanistically, knockdown of CBFA2T2 promoted expression of euchromatic histone methyltransferase 1 (EHMT1) in mBMSCs, which further led to upregulation of H3K9me2 levels at promoter of runt related transcription factor 2 (Runx2), the master regulator of osteogenesis. Collectively, our findings indicate that CBFA2T2 is required for BMP-2-induced osteogenic differentiation of MSCs through inhibition of EHMT1-mediated histone methylation at Runx2 promoter.
Boosting the thermoelectric performance of PbSe through dynamic doping and hierarchical phonon scattering
Cu intercalation is demonstrated to enhance the thermoelectric performance of PbSe through the dynamic doping effect and hierarchical phonon scattering.
Direct observation of multiple rotational stacking faults coexisting in freestanding bilayer MoS 2
Electronic properties of two-dimensional (2D) MoS 2 semiconductors can be modulated by introducing specific defects. One important type of defect in 2D layered materials is known as rotational stacking fault (RSF), but the coexistence of multiple RSFs with different rotational angles was not directly observed in freestanding 2D MoS 2 before. In this report, we demonstrate the coexistence of three RSFs with three different rotational angles in a freestanding bilayer MoS 2 sheet as directly observed using an aberration-corrected transmission electron microscope (TEM). Our analyses show that these RSFs originate from cracks and dislocations within the bilayer MoS 2 . First-principles calculations indicate that RSFs with different rotational angles change the electronic structures of bilayer MoS 2 and produce two new symmetries in their bandgaps and offset crystal momentums. Therefore, employing RSFs and their coexistence is a promising route in defect engineering of MoS 2 to fabricate suitable devices for electronics, optoelectronics, and energy conversion.