Luo, Zhenghui | Search NASA

DOE OSTI2024

A Difluoro‐Methoxylated Ending‐Group Asymmetric Small Molecule Acceptor Lead Efficient Binary Organic Photovoltaic Blend

Abstract Developing a new end group for synthesizing asymmetric small molecule acceptors (SMAs) is crucial for achieving high‐performance organic photovoltaics (OPVs). Herein, an asymmetric small molecule acceptor, BTP‐BO‐4FO, featuring a new difluoro‐methoxylated end‐group is reported. Compared to its symmetric counterpart L8‐BO, BTP‐BO‐4FO exhibits an upshifted energy level, larger dipole moment, and more sequential crystallinity. By adopting two representative and widely available solvent additives (1‐chloronaphthalene (CN) and 1,8‐diiodooctane (DIO)), the device based on PM6:BTP‐BO‐4FO (CN) photovoltaic blend demonstrates a power conversion efficiency (PCE) of 18.62% with an excellent open‐circuit voltage (V OC ) of 0.933 V, which surpasses the optimal result of L8‐BO. The PCE of 18.62% realizes the best efficiencies for binary OPVs based on SMAs with asymmetric end groups. A series of investigations reveal that optimized PM6:BTP‐BO‐4FO film demonstrates similar molecular packing motif and fibrillar phase distribution as PM6:L8‐BO (DIO) does, resulting in comparable recombination dynamics, thus, similar fill factor. Besides, it is found PM6:BTP‐BO‐4FO possesses more efficient charge generation, which yields betterV OC –J SC balance. This study provides a new ending group that enables a cutting‐edge efficiency in asymmetric SMA‐based OPVs, enriching the material library and shed light on further design ideas.

Chemistry↗

DOE OSTI2022

High-Performance Non-fullerene organic solar cells enabled by noncovalent Conformational locks and Side-Chain engineering

Three novel small molecular acceptors (SMAs) BO-2F, BO-C8-2F and BO-C2C6-C8-2F were designed and synthesized. These acceptors all possess planar molecular backbone because of the introduction of intramolecular noncovalent interaction. Among them, BO-C2C6-C8-2F with four side chains, which has the highest solubility, can form more appropriate nanomorphology when blending with PBDB-T. Hence, organic solar cells (OSCs) based on PBDB-T:BO-C2C6-C8-2F displayed an outstanding power convesion efficiency (PCE) of 14.25%, which is higher than BO-2F and BO-C8-2F based ones. To the best of our knowledge, the PCE of 14.25% is one of the highest for the OSCs based on A-π-D-π-A type SMAs. Finally, our results have demonstrated that the combination of side-chain engineering and intramolecular conformation lock has a great prospect in the design of high performance SMAs for OSCs.

14 SOLAR ENERGY↗

DOE OSTI2022

Optimizing spectral and morphological match of nonfullerene acceptors toward efficient indoor organic photovoltaics with enhanced light source adaptability

High-performance indoor organic photovoltaics (IOPV) require large-bandgap material systems to absorb visible light efficiently and reduce energy loss. However, state-of-the-art non-fullerene acceptors (NFAs) have absorptions in the near-infrared region and are thus not suitable for IOPV applications. Herein, we report a series of large-bandgap (>1.70 eV) NFAs named FCC-Cl-C8, FCC-Cl-4Ph and FCC-Cl-6Ph by modifying the alkyl side chains with alkylphenyl chains partially or completely. Results show that the bulky alkylphenyl side chains can finely tune the absorption properties of the NFAs and also affect their morphological properties. Interestingly, the best-performing NFA is the one (named FCC-Cl-4Ph) with partial alkyl and alkylphenyl substitutions, which blue-shift the absorption of the NFAs while minimizing the negative morphological effect of the bulky alkylphenyl chains. As a result, FCC-Cl-4Ph can achieve excellent indoor efficiencies over 29% under a 3000 K LED lamp at 1000 lux and show better solution processability over FCC-Cl-C8. More importantly, FCC-Cl-4Ph can maintain high indoor performance (29.7–26.8% at 1000 lux) under a wide range of indoor lighting spectra (2600, 3000, 4000, and 6500 K LED lamps), which should be due to the blue-shifted spectra of FCC-Cl-4Ph and better matching with various indoor conditions. Finally, this work reveals an interesting structure-property relationship and offers useful strategies for the further design of NFAs toward efficient IOPV devices.

14 SOLAR ENERGY↗

DOE OSTI2021

Regio‐Regular Polymer Acceptors Enabled by Determined Fluorination on End Groups for All‐Polymer Solar Cells with 15.2 % Efficiency

Abstract Polymerization sites of small molecule acceptors (SMAs) play vital roles in determining device performance of all‐polymer solar cells (all‐PSCs). Different from our recent work about fluoro‐ and bromo‐ co‐modified end group of IC‐FBr (a mixture of IC‐FBr1 and IC‐FBr2), in this paper, we synthesized and purified two regiospecific fluoro‐ and bromo‐ substituted end groups (IC‐FBr‐ o & IC‐FBr‐ m ), which were then employed to construct two regio‐regular polymer acceptors named PYF‐T‐ o and PYF‐T‐ m , respectively . In comparison with its isomeric counterparts named PYF‐T‐ m with different conjugated coupling sites, PYF‐T‐ o exhibits stronger and bathochromic absorption to achieve better photon harvesting. Meanwhile, PYF‐T‐ o adopts more ordered inter‐chain packing and suitable phase separation after blending with the donor polymer PM6, which resulted in suppressed charge recombination and efficient charge transport. Strikingly, we observed a dramatic performance difference between the two isomeric polymer acceptors PYF‐T‐ o and PYF‐T‐ m . While devices based on PM6:PYF‐T‐ o can yield power conversion efficiency (PCE) of 15.2 %, devices based on PM6:PYF‐T‐ m only show poor efficiencies of 1.4 %. This work demonstrates the success of configuration‐unique fluorinated end groups in designing high‐performance regular polymer acceptors, which provides guidelines towards developing all‐PSCs with better efficiencies.

Yu, Han↗

DOE OSTI2021

Regio‐Regular Polymer Acceptors Enabled by Determined Fluorination on End Groups for All‐Polymer Solar Cells with 15.2 % Efficiency

Abstract Polymerization sites of small molecule acceptors (SMAs) play vital roles in determining device performance of all‐polymer solar cells (all‐PSCs). Different from our recent work about fluoro‐ and bromo‐ co‐modified end group of IC‐FBr (a mixture of IC‐FBr1 and IC‐FBr2), in this paper, we synthesized and purified two regiospecific fluoro‐ and bromo‐ substituted end groups (IC‐FBr‐ o & IC‐FBr‐ m ), which were then employed to construct two regio‐regular polymer acceptors named PYF‐T‐ o and PYF‐T‐ m , respectively . In comparison with its isomeric counterparts named PYF‐T‐ m with different conjugated coupling sites, PYF‐T‐ o exhibits stronger and bathochromic absorption to achieve better photon harvesting. Meanwhile, PYF‐T‐ o adopts more ordered inter‐chain packing and suitable phase separation after blending with the donor polymer PM6, which resulted in suppressed charge recombination and efficient charge transport. Strikingly, we observed a dramatic performance difference between the two isomeric polymer acceptors PYF‐T‐ o and PYF‐T‐ m . While devices based on PM6:PYF‐T‐ o can yield power conversion efficiency (PCE) of 15.2 %, devices based on PM6:PYF‐T‐ m only show poor efficiencies of 1.4 %. This work demonstrates the success of configuration‐unique fluorinated end groups in designing high‐performance regular polymer acceptors, which provides guidelines towards developing all‐PSCs with better efficiencies.

Yu, Han↗

DOE OSTI2020

Over 15% Efficiency Polymer Solar Cells Enabled by Conformation Tuning of Newly Designed Asymmetric Small‐Molecule Acceptors

Abstract The prosperous period of polymer solar cells (PSCs) has witnessed great progress in molecule design methods to promote power conversion efficiency (PCE). Designing asymmetric structures has been proved effective in tuning energy level and morphology, which has drawn strong attention from the PSC community. Two hepta‐ring and octa‐ring asymmetric small molecular acceptors (SMAs) (IDTP‐4F and IDTTP‐4F) with S‐shape and C‐shape confirmations are developed to study the relationship between conformation shapes and PSC efficiencies. The similarity of absorption and energy levels between two SMAs makes the conformation a single variable. Additionally, three wide‐bandgap polymer donors (PM6, S1, and PM7) are chosen to prove the universality of the relationship between conformation and photovoltaic performance. Consequently, the champion PCE afforded by PM7: IDTP‐4F is as high as 15.2% while that of PM7: IDTTP‐4F is 13.8%. Moreover, the S‐shape IDTP‐4F performs obviously better than their IDTTP‐4F counterparts in PSCs regardless of the polymer donors, which confirms that S‐shape conformation performs better than the C‐shape one. This work provides an insight into how conformations of asymmetric SMAs affect PCEs, specific functions of utilizing different polymer donors to finely tune the active‐layer morphology and another possibility to reach an excellent PCE over 15%.

Guo, Qing↗