Search NASA⌕ Search

Engineering topics

Lv, Fan

Publications and source records attributed to Lv, Fan.

A highly efficient atomically thin curved PdIr bimetallene electrocatalyst

Abstract The multi-metallene with an ultrahigh surface area has great potential in precise tuning of surface heterogeneous d-electronic correlation by surface strain effect for the distinctive surface electronic structure, which is a brand new class of promising 2D electrocatalyst for sustainable energy device application. However, achieving such an atomically thin multi-metallene still presents a great challenge. Herein, we present a new synthetic method for an atomic-level palladium-iridium (PdIr) bimetallene with an average thickness of only ∼1.0 nm for achieving superior catalysis in the hydrogen evolution reaction (HER) and the formic acid oxidation reaction (FAOR). The curved PdIr bimetallene presents a top-ranked high electrochemical active area of 127.5 ± 10.8 m2 gPd+Ir−1 in the reported noble alloy materials, and exhibits a very low overpotential, ultrahigh activity and improved stability for HER and FAOR. DFT calculation reveals that the PdIr bimetallene herein has a unique lattice tangential strain, which can induce surface distortion while concurrently creating a variety of concave-convex featured micro-active regions formed by variously coordinated Pd sites agglomeration. Such a strong strain effect correlates the abnormal on-site active 4d10-t2g-orbital Coulomb correlation potential and directly elevates orbital-electronegativity exposure within these active regions, resulting in a preeminent barrier-free energetic path for significant enhancement of FAOR and HER catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-atom cobalt array bound to distorted 1T MoS2 with ensemble effect for hydrogen evolution catalysis

The grand challenge in the development of atomically dispersed metallic catalysts is their low metal-atom loading density, uncontrollable localization and ambiguous interactions with supports, posing difficulty in maximizing their catalytic performance. Here, we achieve an interface catalyst consisting of atomic cobalt array covalently bound to distorted 1T MoS 2 nanosheets (SA Co-D 1T MoS 2 ). The phase of MoS 2 transforming from 2H to D-1T, induced by strain from lattice mismatch and formation of Co-S covalent bond between Co and MoS 2 during the assembly, is found to be essential to form the highly active single-atom array catalyst. SA Co-D 1T MoS 2 achieves Pt-like activity toward HER and high long-term stability. Active-site blocking experiment together with density functional theory (DFT) calculations reveal that the superior catalytic behaviour is associated with an ensemble effect via the synergy of Co adatom and S of the D-1T MoS 2 support by tuning hydrogen binding mode at the interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PdMo bimetallene for oxygen reduction catalysis

The efficient interconversion of chemicals and electricity through electrocatalytic processes is central to many renewable-energy initiatives. The sluggish kinetics of the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) has long posed one of the biggest challenges in this field, and electrocatalysts based on expensive platinum-group metals are often required to improve the activity and durability of these reactions. The use of alloyingsurface strain and optimized coordination environments has resulted in platinum-based nanocrystals that enable very high ORR activities in acidic media; however, improving the activity of this reaction in alkaline environments remains challenging because of the difficulty in achieving optimized oxygen binding strength on platinum-group metals in the presence of hydroxide. Here we show that PdMo bimetallene—a palladium–molybdenum alloy in the form of a highly curved and sub-nanometre-thick metal nanosheet—is an efficient and stable electrocatalyst for the ORR and the OER in alkaline electrolytes, and shows promising performance as a cathode in Zn–air and Li–air batteries. The thin-sheet structure of PdMo bimetallene enables a large electrochemically active surface area (138.7 square metres per gram of palladium) as well as high atomic utilization, resulting in a mass activity towards the ORR of 16.37 amperes per milligram of palladium at 0.9 volts versus the reversible hydrogen electrode in alkaline electrolytes. This mass activity is 78 times and 327 times higher than those of commercial Pt/C and Pd/C catalysts, respectively, and shows little decay after 30,000 potential cycles. Density functional theory calculations reveal that the alloying effect, the strain effect due to the curved geometry, and the quantum size effect due to the thinness of the sheets tune the electronic structure of the system for optimized oxygen binding. Finally, given the properties and the structure–activity relationships of PdMo metallene, we suggest that other metallene materials could show great promise in energy electrocatalysis.

25 ENERGY STORAGE↗

Strengthening reactive metal-support interaction to stabilize high-density Pt single atoms on electron-deficient g-C 3 N 4 for boosting photocatalytic H 2 production

Tuning reactive metal-support interaction (RMSI) is a promising approach to optimizing catalytic active sites via the electronic, geometric and compositional effects. In general, the RMSI is conducted on the reducible oxides via a high-temperature reaction (>550 °C). We report a strong RMSI between Pt single atom (PtSA) and non-oxide-based g-C 3 N 4 built by an in-situ photocatalytic reduction method at a sub-zero temperature. The experimental observation confirms that the rich N vacancies in g-C 3 N 4 produce an obvious electron-deficient effect, which greatly enhances the RMSI. This strong RMSI contributes to the highest PtSA coverage density of 0.35 mg m -2 reported to date in carbon-based materials and outstanding H 2 -evolution activity of 174.5 mmol g -1 h -1 per PtSA relative to those on the electron-rich g-C 3 N 4 . The structure simulation reveals that the RMSI can not only stabilize the PtSA on the electron-deficient g-C 3 N 4 via the strong chemical bond between PtSA and the two-coordinated C (C 2C ) sites caused by the N vacancies, but also promises the PtSA with an optimized electronic and geometric structures for capturing photogenerated electrons and producing H 2 . This finding opens a new channel for designing and manipulating single atom-loaded photocatalyst via the RMSI at a sub-zero low temperature.

36 MATERIALS SCIENCE↗