Search NASA⌕ Search

Engineering topics

Ly, Alvin

Publications and source records attributed to Ly, Alvin.

6 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Synergizing Fe 2 O 3 Nanoparticles on Single Atom Fe‐N‐C for Nitrate Reduction to Ammonia at Industrial Current Densities

The electrochemical reduction of nitrates (NO 3 − ) enables a pathway for the carbon neutral synthesis of ammonia (NH 3 ), via the nitrate reduction reaction (NO 3 RR), which has been demonstrated at high selectivity. However, to make NH 3 synthesis cost-competitive with current technologies, high NH 3 partial current densities (j NH3 ) must be achieved to reduce the levelized cost of NH 3 . Here, the high NO 3 RR activity of Fe-based materials is leveraged to synthesize a novel active particle-active support system with Fe 2 O 3 nanoparticles supported on atomically dispersed Fe–N–C. The optimized 3×Fe 2 O 3 /Fe–N–C catalyst demonstrates an ultrahigh NO 3 RR activity, reaching a maximum j NH3 of 1.95 A cm −2 at a Faradaic efficiency (FE) for NH 3 of 100% and an NH 3 yield rate over 9 mmol hr −1 cm −2 . Operando XANES and post-mortem XPS reveal the importance of a pre-reduction activation step, reducing the surface Fe 2 O 3 (Fe 3+ ) to highly active Fe 0 sites, which are maintained during electrolysis. Durability studies demonstrate the robustness of both the Fe 2 O 3 particles and Fe–N x sites at highly cathodic potentials, maintaining a current of −1.3 A cm −2 over 24 hours. This work exhibits an effective and durable active particle-active support system enhancing the performance of the NO 3 RR, enabling industrially relevant current densities and near 100% selectivity.

active support↗
DOE OSTI2023

Elucidating electrochemical nitrate and nitrite reduction over atomically-dispersed transition metal sites

Abstract Electrocatalytic reduction of waste nitrates (NO 3 − ) enables the synthesis of ammonia (NH 3 ) in a carbon neutral and decentralized manner. Atomically dispersed metal-nitrogen-carbon (M-N-C) catalysts demonstrate a high catalytic activity and uniquely favor mono-nitrogen products. However, the reaction fundamentals remain largely underexplored. Herein, we report a set of 14; 3 d -, 4 d -, 5 d - and f -block M-N-C catalysts. The selectivity and activity of NO 3 − reduction to NH 3 in neutral media, with a specific focus on deciphering the role of the NO 2 − intermediate in the reaction cascade, reveals strong correlations (R=0.9) between the NO 2 − reduction activity and NO 3 − reduction selectivity for NH 3 . Moreover, theoretical computations reveal the associative/dissociative adsorption pathways for NO 2 − evolution, over the normal M-N 4 sites and their oxo-form (O-M-N 4 ) for oxyphilic metals. This work provides a platform for designing multi-element NO 3 RR cascades with single-atom sites or their hybridization with extended catalytic surfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Robust palladium hydride catalyst for electrocatalytic formate formation with high CO tolerance

Palladium is unique in the electrocatalytic reduction of CO 2 to formate because of its low or even near-equilibrium onset potential. However, the inevitably produced CO molecules poison and deactivate the catalyst surface, resulting in an insufficient operating lifetime (<30 min) for conventional and optimized Pd catalysts. In this work, we present a hydrogen-rich Palladium hydride catalyst (PdH0.5/C) derived from a one-step solvothermal synthesis. This catalyst showed a 93.1 % faradaic efficiency towards formate at – 0.4 V (vs RHE). The working lifetime reached a record of 4 h, which was ~15 times longer than a commercial Pd catalyst and outperformed all previous Pd-based electrocatalysts for CO 2 -HCOO – conversion. The high CO tolerance was attributed to the selectivity improvement induced by lattice hydrogen and the weak CO adsorption strength on diverse active sites (i.e. kink, step, and terrace). Isotopic analysis revealed a direct participation of the lattice hydrogen in the protonation of CO 2 molecules in formate formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Catalysts by pyrolysis: Direct observation of transformations during re-pyrolysis of transition metal-nitrogen-carbon materials leading to state-of-the-art platinum group metal-free electrocatalyst

Transition metal-nitrogen-carbon (M-N-C) materials have been the focus of scientists’ efforts to address the rising need for earth-abundant materials solutions for energy technology and decarbonization of the economy. They are viewed as one of the most promising candidates to replace platinum group metal (PGM) catalysts in the fuel cell and energy conversion fields, including the application of oxygen reduction reaction, carbon dioxide reduction reaction, and nitrogen reduction reaction. In the effort to improve M-N-C materials properties and achieve atomic dispersity of the transition metal in the carbonaceous matrix, a re-pyrolysis process has been proposed. This secondary heat treatment process of already obtained primary pyrolysis-derived M-N-C materials has been widely reported to substantially improve the electrochemical performance and operational stability of the catalysts. Here, we report a systematic investigation of this process used on samples of templated M-N-C catalysts to obtain state-of-the-art catalysts via in situ heating X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy (STEM), energy-dispersive X-ray spectroscopy (EDS), electron energy loss spectroscopy (EELS), X-ray diffraction (XRD), and X-ray computed tomography (CT) characterization methods. It is found that the re-pyrolysis of M-N-C materials could result in the partial amorphization of the carbonaceous substrate. It causes the rearrangement and transformation of multitudinous N moieties, leading to optimization of their morphological display and association with atomically dispersed transition metal dopants. Ultimately, the re-pyrolysis results in an increase in uniformity of the active Fe-Nx sites distribution without the formation of nano-crystalline phases (metallic or carbide) and with overall preservation of the morphology of the carbonaceous framework achieved during the first formative pyrolysis step of the templated synthesis. Finally, these observations provide confirmation that empirically established re-pyrolysis is recommended to be used on all M-N-C materials despite the different synthesis routes to obtain a practical advanced catalytic material.

36 MATERIALS SCIENCE↗