Engineering topics

Ma, Xuedan

Publications and source records attributed to Ma, Xuedan.

At least 19 records

DOE OSTI2024

Upconversion on the Micrometer Scale: Impact of Local Heterogeneity

The properties of perovskite/naphtho[2,3-a]pyrene (NaPy) upconversion devices are investigated by a combination of atomic force microscopy and photoluminescence mapping to understand the role of microscopic heterogeneity in the ensemble device properties. The results emphasize strong microscopic inhomogeneity across the perovskite/NaPy upconversion device due to local formation of NaPy microcrystals. NaPy shows emission from three distinct states in the solid state: S 1 ′ emission at 520 nm, excimer emission at 560 nm, and S 1 ″ emission at 620 nm. Clear spatial differences in the emission spectrum under 405 nm excitation are found, highlighting that there is a strong microcrystal-to-microcrystal variation in the optical properties─emphasizing a need for multimodal measurements. Furthermore, our results indicate that microcrystals with strong emission from the strongly coupled low-energy state S 1 ″ (J-dimer) show much higher upconversion intensity than those with dominant emission from the high-energy S 1 ′ state (I-aggregate). Hence, our results suggest that microcrystals with strong emission from the low-energy state S 1 ″ act as isolated hotspots for upconversion.

Crystals↗

DOE OSTI2024

Orientation Sensitive SEIRA Sensors Based on Single-Walled Carbon Nanotube Near Fields

Molecular vibrations that bear information about intrinsic properties of chemical compounds are challenging to detect at submonolayer densities. Surface-enhanced infrared absorption (SEIRA) spectroscopy has been proven to be a viable approach to enhance and detect weak vibration signals. Here, in this study, we report a SEIRA sensor based on mid-infrared surface plasmon resonances supported by single-walled carbon nanotubes (SWCNTs). Due to the 1D nature of SWCNTs, their plasmon modes are highly polarized with the electromagnetic fields spatially confined to nanometer scales. Leveraging these characteristics of SWCNTs, we observe a polarization selective coupling between their surface plasmons and vibrational modes of chemical bonds introduced onto their surfaces. A maximum modulation of similar to 15% to the plasmon resonance peak is obtained for a submonolayer chemical group coverage. These findings suggest that SWCNTs may potentially serve as a highly sensitive SEIRA platform for revealing intricate information about molecular compositions and bond orientations.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Lattice Symmetry-Guided Charge Transport in 2D Supramolecular Polymers Promotes Triplet Formation

Singlet-to-triplet intersystem crossing (ISC) in organic molecules is intimately connected with their geometries: by modifying the molecular shape, symmetry selection rules pertaining to spin-orbit coupling can be partially relieved, leading to extra matrix elements for increased ISC. As an analog to this molecular design concept, the study finds that the lattice symmetry of supramolecular polymers also defines their triplet formation efficiencies. A supramolecular polymer self-assembled from weakly interacting molecules is considered. Its 2D oblique unit cell effectively renders it as a coplanar array of 1D molecular columns weakly bound to each other. Using momentum-resolved photoluminescence imaging in combination with Monte Carlo simulations, the study found that photogenerated charge carriers in the supramolecular polymer predominantly recombine as spin-uncorrelated carrier pairs through inter-column charge transfer states. This lattice-defined recombination pathway leads to a substantial triplet formation efficiency (≈60%) in the supramolecular polymer. These findings suggest that lattice symmetry of micro-/macroscopic structures relying on intermolecular interactions can be strategized for controlled triplet formation.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Nanosecond Structural Dynamics during Electrical Melting of Charge Density Waves in 1⁢T-TaS 2

Electrical control of charge density waves has been of immense interest, as the strong underlying electron-lattice interactions potentially open new, efficient pathways for manipulating their ordering and, consequently, their electronic properties. However, the transition mechanisms are often unclear as electric field, current, carrier injection, heat, and strain can all contribute and play varying roles across length scales and timescales. Here, we provide insight on how electrical stimulation melts the room temperature charge density wave order in 1T-TaS 2 by visualizing the atomic and mesoscopic structural dynamics from quasistatic to nanosecond pulsed melting. Using a newly developed ultrafast electron microscope setup with electrical stimulation, we reveal the order and strain dynamics during voltage pulses as short as 20 ns. The order parameter dynamics across a range of pulse amplitudes and durations support a thermally driven mechanism even for fields as high as 19 kV cm -1 . In addition, time-resolved imaging reveals a heterogeneous, mesoscopic strain response across the flake, including MHz-scale acoustic resonances that emerge during sufficiently short pulsed excitation which may modulate the order. In conclusion, these results suggest that metallic charge density wave phases like studied here may be more robust to electronic switching pathways than insulating ones, motivating further investigations at higher fields and currents in this and other related systems.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Optical Properties of Low‐Defect Large‐Area Hexagonal Boron Nitride for Quantum Applications

Intrinsic defects and their concentrations in hexagonal boron nitride (h-BN) play a key role in single-photon emission. In this study, the optical properties of large-area multilayer h-BN-on-sapphire grown by metal-organic chemical vapor deposition are explored. Based on the detailed spectroscopic characterization using both cathodoluminescence (CL) and photoluminescence (PL) measurements, the material is devoid of random single-point defects instead of a few clustered complex defects. The emission spectra of the measurements confirm a record-low-defect concentration of ≈10 4 cm −2 . Post-annealing, no significant changes are observed in the measured spectra and the defect concentrations remain unaltered. Through CL and PL spectroscopy, an optically active boron vacancy spin defect is identified and a novel complex defect combination arising from carbon impurities is revealed. This complex defect, previously unreported, signifies a unique aspect of the material. In these findings, the understanding of defect-induced optical properties in h-BN films is contributed, providing insights for potential applications in quantum information science.

42 ENGINEERING↗

DOE OSTI2024

Raman Shifts in Two-Dimensional van der Waals Magnets Reveal Magnetic Texture Evolution

Two-dimensional (2D) van der Waals magnets comprise rich physics that can be exploited for spintronic applications. We investigate the interplay between spin-phonon coupling and spin textures in a 2D van der Waals magnet by combining magneto-Raman spectroscopy with cryogenic Lorentz transmission electron microscopy. Here we find that when stable skyrmion bubbles are formed in the 2D magnet, a field-dependent Raman shift can be observed, and this shift is absent for the 2D magnet prepared in its ferromagnetic state. Correlating these observations with numerical simulations that take into account field-dependent magnetic textures and spin--phonon coupling in the 2D magnet, we associate the Raman shift to field-induced modulations of the skyrmion bubbles and derive the existence of inhomogeneity in the skyrmion textures over the film thickness.

2D van der Waals magnet↗

DOE OSTI2024

Excitation protocols for nonlinear phononics in bismuth and antimony

Here, we study the optical generation and control of coherent phonons in elemental bismuth (Bi) and antimony (Sb) using a classical equation of motion informed by first-principles calculations of the potential energy surface and the frequency-dependent macroscopic dielectric function along the zone-centered optical phonon coordinates. Using this approach, we demonstrate that phonons with the largest optomechanical couplings also have the strongest degree of anharmonicity among the zone-centered modes, a result of the broken-symmetry structural ground state of Bi and Sb. We show how this anharmonicity, explaining the light-induced phonon softening observed in experiments, prevents the application of standard phonon-amplification and annihilation protocols. We introduce a simple linearization protocol that extends the use of such protocols to the case of anharmonic phonons in broken-symmetry materials, and demonstrate its efficiency at high displacement amplitudes. Our formalism and results provide a path for improving optical control in nonlinear phononics.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Broken Symmetry Optical Transitions in (6,5) Single-Walled Carbon Nanotubes Containing sp 3 Defects Revealed by First-Principles Theory

We present a first-principles many-body perturbation theory study of nitrophenyl-doped (6,5) single-walled nanotubes (SWCNTs) to understand how sp 3 doping impacts the excitonic properties. sp 3 -doped SWCNTs are promising as a class of optoelectronic materials with bright tunable photoluminescence, long spin coherence, and single-photon emission (SPE), motivating the study of spin excitations. We predict that the dopant results in a single unpaired spin localized around the defect site, which induces multiple low-energy excitonic peaks. By comparing optical absorption and photoluminescence from experiment and theory, we identify the transitions responsible for the red-shifted, defect-induced E 11 * peak, which has demonstrated SPE for some dopants; the presence of this state is due to both the symmetry-breaking associated with the defect and the presence of the defect-induced in-gap state. Furthermore, we find an asymmetry between the contribution of the two spin channels, suggesting that this system has potential for spin-selective optical transitions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Photo-induced halide redistribution in 2D halide perovskite lateral heterostructures

An improved understanding of the degradation pathways under external stimuli is needed to address stability challenges in two-dimensional (2D) perovskite semiconductor materials. Here, in this study, in situ synchrotron nanoprobe X-ray fluorescence (nano-XRF) is used to investigate the evolution of halide redistribution within various 2D halide perovskite (n = 1–3) lateral heterostructures under ultraviolet (UV) exposure. Further, the results show that iodine (I) experiences a loss in all cases, with the rate of change following the perovskite dimensionality monotonically. In contrast, bromine (Br) is relatively more stable than I in n = 2 and 3 heterostructures, with no significant change in the total Br concentration but a visible amount of Br diffusion to the previously I-rich regime. Combining nano-XRF and X-ray absorption spectroscopy (XAS), we found a reduction of dimensionality in crystals with n > 1 after UV exposure, indicating significant structural reconfiguration beyond ion migration.

2D halide perovskites↗

DOE OSTI2023

Amplified spontaneous emission from europium-based molecular complexes coupled to photonic crystal cavities

Rare-earth ion-based materials bear many remarkable optical properties that render them highly appealing for lighting and quantum-related applications. However, their small oscillator strength and weak emission often pose limitations. Here, in this work, we synthesize and couple Eu(III)-based molecular complexes to nanobeam photonic crystals supporting air modes. A reasonable spatial overlap between the molecular complexes and cavity modes leads to an average spontaneous emission coupling efficiency of 0.19. Our pump power-dependent photoluminescence measurements evidence amplified spontaneous emission from the molecular complexes with an amplification threshold as low as 4.4 W/cm 2 , likely benefiting from the efficient coupling. These findings suggest that integrating rare-earth ion-based molecular complexes with photonic structures could be a viable approach for regulating their emission characteristics for particular applications.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Wavelength-Dependent Spin Excitation with Circularly Polarized Light in CdSe Nanoplatelets

Zinc-blende (ZB) cadmium selenide (CdSe) nanoplatelets (NPLs) have drawn increasing attention as an ideal condensed-phase material for facilitating photon-to-spin transduction in quantum networks. Yet, a systematic investigation of their fidelity in converting circularly polarized light (CPL) to exciton spin polarization as a function of excitation wavelength is lacking. Here, this work demonstrates using time-resolved transient absorption (TA) spectroscopy combined with density functional theory calculations that ZB CdSe NPLs exhibit wavelength-dependent CPL-induced spin polarization. The capacity of CPL to inject spin polarization is maximized for resonant excitation of band-edge valence-to-conduction band (VB/CB) transitions, and the degree to which CPL induces spin polarization can be modified for non-resonant excitation wavelengths as excitation occurs at k-points away from the Γ point from VB states with varying degrees of mixed heavy-hole (HH) and light-hole (LH) characters. Furthermore, it is highlighted that spin polarization within the LH exciton (LX) population created from resonant LH/CB excitation is retained upon LX → HH exciton (HX) relaxation due to the slow electron spin-flip rate (~1.1 ps) compared to the LH → HH inter-band relaxation rate (~200 fs).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Quantum Efficiency Gain in 2D Perovskite Photo and X‐Ray Detectors

Abstract The perovskite polycrystalline thin film detector fabricated by solution method is a promising low‐cost, scalable technology for radiation imaging, but its thin volume limits the sensing efficiency for high‐energy X‐ray photons. This work reports 2D perovskite thin film photo‐diodes with a detection gain when sensing visible and X‐ray photons. Detailed power and temperature‐dependent device characterizations reveal a charge multiplication effect to be responsible for the observed high gain. This is caused by a disparity in electron and hole transport, where electron transport is retarded by a trap/de‐trap process via shallow trap states, whereas the hole transport is fast enough to produce a photoconductive gain in satisfying the charge neutrality. The 2D perovskite made with butylamine spacers is also found to exhibit a larger efficiency gain than those made with phenylethylamines because of the higher likelihood of forming shallow traps in the former. The thin film diodes feature a high temporal response over 1 MHz due to the fast charge collection across a thin volume, and the discovery provides device physics mechanisms in connection to material structure‐function relationship for future optoelectronics design that can boost the efficiency of X‐ray sensing and dim light detection.

2D perovskites↗

DOE OSTI2023

Intersubband Transitions in Lead Halide Perovskite-Based Quantum Wells for Mid-Infrared Detectors

Due to their excellent optical and electrical properties as well as versatile growth and fabrication processes, lead halide perovskites have been widely considered as promising candidates for green energy and applications related to optoelectronics. Here, we investigate their potential applications at infrared wavelengths by modeling the intersubband transitions in perovskite-based quantum well systems. Both single-well and double-well structures are studied, and their energy levels as well as the corresponding wave functions and intersubband transition energies are calculated by solving the one-dimensional Schrödinger equations. Via adjustment of the quantum well and barrier thicknesses, the intersubband transition energies can be tuned to cover a broad infrared wavelength range. We also find that the lead halide perovskite-based quantum wells possess high absorption coefficients. In conclusion, the widely tunable transition energies and high absorption coefficients of the perovskite-based quantum well systems, combined with their unique material and electrical properties, may enable an alternative material system for infrared photodetector applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2023

Direct Observation of Magnetic Bubble Lattices and Magnetoelastic Effects in van der Waals Cr 2 Ge 2 Te 6

Abstract Ferromagnetic van der Waals (vdW) materials are of large current interest for the fundamental study of low‐dimensional magnetism and for potential applications in multilayer heterostructures. Cr 2 Ge 2 Te 6 (CGT) is particularly exciting because it is a ferromagnetic semiconductor with tunable electronic and magnetic properties. Controlling the magnetic domain structure of CGT is a requirement for understanding its novel interface physics and for tuning behavior for potential devices. Herein, cryo‐Lorentz transmission electron microscopy is performed in the temperature range of 12–50K to directly image the magnetic domain structures in CGT. A rich phase diagram of domain structures including stripe domains, magnetic bubble lattices of mixed‐chirality, and topologically‐protected lattices of homochiral magnetic bubbles is observed. The types and chiralities of the bubbles can be controlled by topographical changes in the CGT flakes. Additionally, it is observed that in‐plane strain and magnetoelastic coupling can align and organize both bubble lattices and stripe domains. This study provides insights into creating and controlling complex magnetic domain structures for integration into multilayer heterostructures and for future studies of 2D magnetism.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Long carrier diffusion length in two-dimensional lead halide perovskite single crystals

Ruddlesden-Popper (RP) perovskites are two-dimensional semiconductors for high-performance optoelectronic devices. In this work, we report a long in-plane carrier diffusion length in 2D RP perovskite single crystals probed by scanning photocurrent microscopy. Carrier diffusion lengths of 7–14μm are observed when the number of PbI 6 –2 octahedra between organic spacers increases from 1 to 3. Using detailed light intensity and electric-field-dependent photocurrent measurements, we attribute the observed long diffusion length to the dominating dissociated free carrier transport. This is further validated by time-resolved photoluminescence measurements, where the decay lifetime increases in the presence of an electric field. From our experiments, we conclude that the in-plane transport in RP perovskites is efficient because of the partial free carrier generation, which overcomes strong excitonic effects. In conclusion, our results suggest that semiconducting devices fabricated from RP perovskite single crystals can be as efficient as their 3D counterparts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Encapsulating Semiconductor Quantum Dots in Supramolecular Cages Enables Ultrafast Guest–Host Electron and Vibrational Energy Transfer

In the field of supramolecular chemistry, host- guest systems have been extensively explored to encapsulate a wide range of substrates, owing to emerging functionalities in nano-confined space that cannot be achieved in dilute solutions. However, host-guest chemistry is still limited to encapsulation of small guests. Herein, we construct a water-soluble metallo-supramolecular hexagonal prism with a large hydrophobic cavity by anchoring multiple polyethylene glycol chains onto the building blocks. Then, assembled prisms are able to encapsulate quantum dots (QDs) with diameters of less than 5.0 nm. Furthermore, we find that the supramolecular cage around each QD strongly modifies the photophysics of the QD by universally increasing the rates of QD relaxation processes via ultrafast electron and vibrational energy transfer. In conclusion, taken together, these efforts expand the scope of substrates in host-guest systems and provide a new approach to tune the optical properties of QDs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Utilizing Ultraviolet Photons to Generate Single-Photon Emitters in Semiconductor Monolayers

The understanding and controlled creation of atomic defects in semiconductor transition metal dichalcogenides (TMDs) are highly relevant to their applications in high-performance quantum optics and nanoelectronic devices. Here, we demonstrate a versatile approach in generating single-photon emitters in MoS 2 monolayers using widely attainable UV light. We discover that only defects engendered by UV photons in vacuum exhibit single-photon-emitter characteristics, whereas those created in air lack quantum emission attributes. In combination with theoretical calculations, we assign the defects generated in vacuum to unpassivated sulfur vacancies, whose highly localized midgap states give rise to single-photon emission. In contrast, UV irradiation of the MoS 2 monolayers in air results in oxygen-passivated sulfur vacancies, whose optical properties are likely governed by their pristine band-to-defect band optical transitions. Furthermore, these findings suggest that widely available light sources such as UV light can be utilized for creating quantum photon sources in TMDs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2022

Quantum Photon Sources in WSe 2 Monolayers Induced by Weakly Localized Strain Fields

Quantum emitters in semiconductor transition metal dichalcogenide (TMD) monolayers hold great promise for many quantum optics applications due to the intriguing properties afforded by the host materials. The creation of localized excitonic states in two-dimensional semiconductors is also fundamentally interesting. Local strain engineering of TMD monolayers has been attested to be a viable approach for creating quantum emitters. However, despite the ubiquitous existence of local topography variations in the structures used to create strain gradients in the TMD monolayers, an understanding of their influence on the strain fields and exciton trapping is notably lacking, especially on the nanoscale. In this study, we investigate WSe 2 monolayers deposited on the edges of asfabricated trenches, which are deemed to induce 1D delocalized strain profiles in the monolayers, and observe optical signatures of weakly confined excitonic states supporting biexciton emission. Here, our numerical simulations of the strain distributions suggest that the quantum emitters originate from quasi-1D like localized strain profiles induced by local topography variations at the trench edges. These findings have strong implications toward the controlled creation of quantum emitters in TMD monolayers and their efficient coupling to photonic structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗