Search NASA⌕ Search

Engineering topics

Ma, Zhen

Publications and source records attributed to Ma, Zhen.

At least 19 records

Magnetic properties of the quasi-one-dimensional S = 1 spin chain antiferromagnet BaNi Te 2 O 7

We report a quasi-one-dimensional S=1 spin chain compound BaNiTe 2 O 7 . This magnetic system has been investigated by magnetic susceptibility, specific heat, and neutron powder diffraction. These results indicate that BaNiTe 2 O 7 develops a short-range magnetic correlation around T ~ 22K. With further cooling, an antiferromagnetic phase transition is observed at T N ~ 5.4K. Neutron powder diffraction revealed antiferromagnetic noncollinear order with a commensurate propagation vector k = (1/2,1,0). The refined magnetic moment size of Ni 2+ at 1.5 K is 1.84 μB , and its noncollinear spin texture is confirmed by first-principles calculations. In conclusion, inelastic neutron-scattering results and density functional theory calculations confirmed the quasi-one-dimensional nature of the spin systems.

1-dimensional spin chains↗

Enhanced low-energy magnetic excitations evidencing the Cu-induced localization in the Fe-based superconductor Fe 0.98 Te 0.5 Se 0.5

Here, we have performed inelastic neutron scattering measurements on optimally doped Fe 0.98 Te 0.5 Se 0.5 and 10% Cu-doped Fe 0.88 Cu 0.1 Te 0.5 Se 0.5 to investigate the substitution effects on the spin excitations in the whole energy range up to 300 meV. It is found that substitution of Cu for Fe enhances the low-energy spin excitations (≤100 meV), especially around the (0.5, 0.5) point, and leaves the high-energy magnetic excitations intact. In contrast to the expectation that Cu with spin 1/2 will dilute the magnetic moments contributed by Fe with a larger spin, we find that the 10% Cu doping enlarges the effective fluctuating moment from 2.85 to 3.13 μB/Fe, although there is no long- or short-range magnetic order around (0.5, 0.5) and (0.5, 0). The presence of enhanced magnetic excitations in the 10% Cu doped sample which is in the insulating state indicates that the magnetic excitations must have some contributions from the local moments, reflecting the dual nature of the magnetism in iron-based superconductors. We attribute the substitution effects to the localization of the itinerant electrons induced by Cu dopants. Furthermore, these results indicate that the Cu doping does not act as electron donor as in a rigid-band shift model, but more as scattering centers that localize the system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ionic-Liquid-Gating Induced Protonation and Superconductivity in FeSe, FeSe 0.93 S 0.07 , ZrNCl, 1 T -TaS 2 and Bi 2 Se 3 *

We report protonation in several compounds by an ionic-liquid-gating method, under optimized gating conditions. This leads to single superconducting phases for several compounds. Non-volatility of protons allows post-gating magnetization and transport measurements. The superconducting transition temperature T c is enhanced to 43.5 K for FeSe 0.93 S 0.07 , and 41 K for FeSe after protonation. Superconducting transitions with T c ~ 15 K for ZrNCl, ~7.2 K for 1T-TaS 2 , and ~3.8 K for Bi 2 Se 3 are induced after protonation. Electric transport in protonated FeSe 0.93 S 0.07 confirms high-temperature superconductivity. Our 1 H nuclear magnetic resonance (NMR) measurements on protonated FeSe 1- x S x reveal enhanced spin-lattice relaxation rate 1/ 1 T 1 with increasing x , which is consistent with the LDA calculations that H + is located in the interstitial sites close to the anions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Discovery of coexisting Dirac and triply degenerate magnons in a three-dimensional antiferromagnet

Topological magnons are emergent quantum spin excitations featured by magnon bands crossing linearly at the points dubbed nodes, analogous to fermions in topological electronic systems. Experimental realisation of topological magnons in three dimensions has not been reported so far. Here, by measuring spin excitations (magnons) of a three-dimensional antiferromagnet Cu3TeO6 with inelastic neutron scattering, we provide direct spectroscopic evidence for the coexistence of symmetry-protected Dirac and triply degenerate nodes, the latter involving three-component magnons beyond the Dirac–Weyl framework. Our theoretical calculations show that the observed topological magnon band structure can be well described by the linear-spin-wave theory based on a Hamiltonian dominated by the nearest neighbour exchange interaction J1. As such, we showcase Cu3TeO6 as an example system where Dirac and triply degenerate magnonic nodal excitations coexist, demonstrate an exotic topological state of matter, and provide a fresh ground to explore the topological properties in quantum materials.

36 MATERIALS SCIENCE↗

Unusual phonon density of states and response to superconducting transition in In-doped topological crystalline insulator Pb 0.5 Sn 0.5 Te

Here, we present inelastic neutron scattering results of phonons in (Pb 0.5 Sn 0.5 ) 1–x In x Te powders, with x = 0, and 0.3.The x = 0 sample is a topological crystalline insulator, and the x = 0 . 3 sample is a superconductor with a bulk superconducting transition temperature T c of 4.7 K. In both samples, we observe unexpected van Hove singularities in the phonon density of states at energies of 1– 2.5 meV, suggestive of local modes. On cooling the superconducting sample through T c , there is an enhancement of these features for energies below twice the superconducting-gap energy. We further note that the superconductivity in (Pb 0.5 Sn 0.5 ) 1–x In x Te occurs in samples with normal-state resistivities of order 10 mΩ cm, indicative of bad-metal behavior. Calculations based on density functional theory suggest that the superconductivity is easily explainable in terms of electron-phonon coupling; however, they completely miss the low-frequency modes and do not explain the large resistivity. While the bulk superconducting state of (Pb 0.5 Sn 0.5 ) 0.7 In 0.3 Te appears to be driven by phonons, a proper understanding will require ideas beyond simple BCS theor

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Numerical simulation of seawater intrusion to coastal aquifers and brine water/freshwater interaction in south coast of Laizhou Bay, China

Seawater intrusion and brine water/freshwater interaction have significantly affected agriculture, industry and public water supply at Laizhou Bay, Shandong Province, China. A two-dimensional SEAWAT model is developed to simulate the seawater intrusion to coastal aquifers and brine water/fresh water interaction in the south of Laizhou Bay. This model is applied to predict the seawater intrusion and brine water/freshwater interface development in the coming years. The model profile is perpendicular to the coastal line with two interfaces, freshwater-saline water interface near the shore and inland brine water-saline water-seawater interface. The hydrogeological parameters in the SEAWAT-2000 model are calibrated by the head and salinity measurements. The precipitation infiltration coefficient, boundary conditions and thicknesses of aquifers are studied in a sensitivity analysis. The predicted results indicate that equivalent freshwater head in shallow freshwater-saline water area will decline 2.0 m by the end of the forecasting period, caused by groundwater over-pumping for farmland irrigation. The groundwater head in the brine-saline water area will also decrease about 1.8 m by the end of forecasting period, caused by excessive brine mining. Salinity decreases below 105 g/L in the brine area, but increases in other areas and contaminates fresh groundwater resources.

54 ENVIRONMENTAL SCIENCES↗

Effect of cooling rate and Co content on the formation of Fe-rich intermetallics in hypoeutectic Al7Si0.3Mg alloy with 0.5%Fe

Highlights: • Co element is firstly used in Al-0.7Si-0.3Mg alloy with 0.5 wt.% Fe to modify the morphology of Fe-rich intermetallics. • 0.75 wt.% Co addition is sufficient to suppress the undesirable effect of acicular Fe-rich intermetallics. • Co/Fe ratio determine the morphology and crystal structure of intermetallics and the optical ratio is in the range of 1-2. - Abstract: The effects of cooling rate and Co addition (0–1 wt%) on the Fe-rich intermetallics in Al7Si0.3Mg alloy with 0.5%Fe were studied in this study. The evolution of microstructure and crystal structure have been characterized by metallographic and transmission electron microscopy. The results indicated that higher cooling rate and Co addition were beneficial to modify the morphology and decrease the size of Fe-rich intermetallics. At the particular cooling rate of 2 k/s, 0.75 wt% Co was proved to be sufficient to improving the morphology of intermetallics from harmful acicular β-Al5FeSi phase to Chinese script or skeleton α-Al15(Fe,Co)3Si2 phase. Above all, the Co/Fe ratio in intermetallics was found to be an importance parameter in determining the morphology and crystal structure of (Fe,Co)-rich intermetallics. With the ratio increased from 0 to 3, the morphology changed gradually: acicular shape→short rod-like shape→Chinese script/skeleton like shape→rod-like shape. And the crystal structure of (Fe,Co)-rich intermetallics evolved from Monoclinic→Hexagonal→Simple cubic→Body-centered structure correspondingly. The optimal ratio of Co to Fe in intermetallics, which has Chinese script with hexagonal structure, was in the range of 1–2.

36 MATERIALS SCIENCE↗

Grazing disturbance increases transient but decreases persistent soil seed bank

Abstract Very few studies have examined whether the impacts of grazing disturbance on soil seed banks occur directly or indirectly through aboveground vegetation and soil properties. The potential role of the seed bank in alpine wetland restoration is also unknown. We used SEM (structural equation modeling) to explore the direct effect of grazing disturbance on the seed bank and the indirect effect through aboveground vegetation and soil properties. We also studied the role of the seed bank on the restoration potential in wetlands with various grazing intensities: low (fenced, winter grazed only), medium (seasonally grazed), and high (whole‐year grazed). For the seed bank, species richness and density per plot showed no difference among grazing intensities for each depth (0–5, 5–10, 10–15 cm) and for the whole depth (0–15 cm) in spring and summer. There was no direct effect of grazing disturbance on seed bank richness and density both in spring and summer, and also no indirect effect on the seed bank through its direct effect on vegetation richness and abundance. Grazing disturbance indirectly increased spring seed bank density but decreased summer seed bank density through its direct effect (negative correlation) on soil moisture and total nitrogen and its indirect effect on vegetation abundance. Species composition of the vegetation changed with grazing regime, but that of the seed bank did not. An increased trend of similarity between the seed bank and aboveground vegetation with increased grazing disturbance was found in the shallow depth and in the whole depth only in spring. Although there was almost no change in seed bank size with grazing intensities, grazing disturbance increased the quantity of transient seeds but decreased persistent seeds. Persistent seeds stored in the soil could play a crucial role in vegetation regeneration and in restoration of degraded wetland ecosystems. The seed bank should be an integral part of alpine wetland restoration programs.

Ma, Miaojun↗

Study on Composition, Microstructure and Wear Behavior of Fe-B-C Wear-Resistant Surfacing Alloys

Fe-B-C alloy layers with various microstructures were welded on Q235 steel plates using welding powders/H08Mn2Si and welding wires composite surfacing technology. The relationship existing between the chemical composition, microstructure and wear resistance of the surfacing alloy layers was investigated by scanning electron microscopy, x-ray diffraction, electron backscatter diffraction and wear tests. The results demonstrated that the volume fractions and morphologies of the microstructures in the surfacing alloy layers could be controlled by adjusting the boron and carbon contents in the welding powders, which could further regulate the wear resistance of the surfacing alloy layers. The typical microstructures of the Fe-B-C surfacing alloy layers included dendritic Fe, rod-like Fe{sub 2}B, fishbone-like Fe{sub 2}B and daisy-like Fe{sub 3}(C, B). The wear resistance of the alloy layers with various morphologies differed. The wear resistance order of the different microstructures was: rod-like Fe{sub 2}B > fishbone-like Fe{sub 2}B > daisy-like Fe{sub 3}(C, B) > dendritic Fe. A large number of rod-like Fe{sub 2}B with high microhardness could be obtained at the boron content of 5.70 ~ 5.90 wt.% and the carbon content of 0.50 ~ 0.60wt.%. The highest wear resistance of the Fe-B-C alloy layers reached the value of 24.1 g{sup −1}, which demonstrates the main microscopic cutting wear mechanism of the Fe-B-C alloy layers.

36 MATERIALS SCIENCE↗

LncRNA-SNHG1 contributes to gastric cancer cell proliferation by regulating DNMT1

Objective: The objective of this study was to determine the expression of long-chain non-coding RNA SNHG1 (lncRNA-SNHG1) in gastric carcinoma and explore its function on cancer cell proliferation. Methods: The expression of lncRNA-SNHG1 in tumor tissues and corresponding adjacent tissues from 50 patients with gastric cancer was detected with realtime-PCR. The relationships between the expression of lncRNA-SNHG1 and clinicopathological features of gastric cancer patients were analyzed. Survival analysis was performed to study the correlation between lncRNA SNHG1 expression and patient prognosis. To assess the effect of LncRNA SNHG1 on proliferation in cancer cells, cell viability and colony formation assays were conducted when lncRNA SNHG1 was upregulated or downregulated by Lentivirus or plasmid in gastric cancer cells. Furthermore, in vivo tumor assay was performed to confirm the impact of lncRNA SNHG1 on proliferation of gastric cancer. Results: The expression of lncRNA SNHG1 in gastric cancer tissues was significantly higher than that in adjacent tissues and was correlated with TNM stage, T stage, and lymph node metastasis. The survival time of patients with higher expression level of lncRNA-SNHG1 was significantly lower than that of the lower expression level. LncRNA-SNHG1 accelerated the proliferation of gastric cancer cells obviously and increased the expression of DNMT1. Conclusion: LncRNA SNHG1 promotes DNMT1 expression, which facilitates the gastric cancer proliferation. - Highlights: • The expression of lncRNA SNHG1 in gastric cancer tissues was significantly higher than that in adjacent tissues. • The expression of lncRNA SNHG1 was correlated with TNM stage, T stage, and lymph node metastasis. • LncRNA-SNHG1 accelerated the proliferation of gastric cancer cells, both in vitro and in vivo. • LncRNA-SNHG1 promoted DNMT1 expression, which facilitated the gastric cancer proliferation.

60 APPLIED LIFE SCIENCES↗

PART-1 functions as a competitive endogenous RNA for promoting tumor progression by sponging miR-143 in colorectal cancer

LncRNAs were altered in several cancers and played a crucial role in various biological activities and progressions of different diseases, including proliferation, chemical resistance, and metastasis. In the present study, we revealed that prostrate androgen-regulated transcript-1 (PART-1) was highly expressed in colorectal cancer cells and tissues, and knockdown of PART-1 suppressed cell proliferation and metastasis, both in vitro and in vivo. In addition, PART-1 functioned as a ceRNA of DNMT3A, by sponging miR-143. Finally,PART-1 induced tumor progression by regulating DNMT3A. - Highlights: • Prostrate androgen-regulated transcript-1 (PART-1) was highly expressed in colorectal cancer cells and tissues. • Knockdown of PART-1 suppressed cell proliferation and metastasis, both in vitro and in vivo. • PART-1 functioned as a ceRNA of DNMT3A, by sponging miR-143. • PART-1 induced tumor progression by regulating DNMT3A.

60 APPLIED LIFE SCIENCES↗

Nanosize Control on Porous β-MnO2 and Their Catalytic Activity in CO Oxidation and N2O Decomposition

A major challenge in the synthesis of porous metal oxides is the control of pore size and/or wall thickness that may affect the performance of these materials. Herein, nanoporous β-MnO2 samples were prepared using different hard templates, e.g., ordered mesoporous silica SBA-15 and KIT-6, disordered mesoporous silica, and colloidal silica. These samples were characterized by Powder X-Ray Diffraction (PXRD), Transmission Electron Microscopy (TEM), and N2 adsorption-desorption. The pore size distribution of β-MnO2 was tuned by the different hard templates and their preparation details. Catalytic activities in CO oxidation and N2O decomposition were tested and the mesoporous β-MnO2 samples demonstrated superior catalytic activities compared with their bulk counterpart.

36 MATERIALS SCIENCE↗

High temperature measurement using very high shutter speed to avoid image saturation

This paper explores the adaptation of the two-colour principle to develop a high-speed colour temperature correlation system, which is able to cover a range of temperature that is challenging to achieve before. A colour digital camera has built in RGB filters. It is possible to measure the temperature from the ratio of intensity of the green and red pixels using the two-colour principle based on the expansion of the Plank’s radiation law. In this study, experiments were carried out using a temperature calibrated tungsten ribbon lamp which can be tuned to vary from 1300 to 2200°C. Using very high shutter speed and small aperture, the high-speed camera successfully captured the tungsten ribbon without image saturation at the full temperature scale. Tests have been carried out at different temperature and camera settings. The sensitivity and errors have been analysed, and experiment results demonstrate the potential of using very high shutter speed is available for measuring the temperature even beyond 2200°C.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A solid with a hierarchical tetramodal micro-meso-macro pore size distribution

Porous solids have an important role in addressing some of the major energy-related problems facing society. Here we describe a porous solid, a-MnO 2 , with a hierarchical tetramodal pore size distribution spanning the micro-, meso- and macro pore range, centred at 0.48, 4.0, 18 and 70 nm. The hierarchical tetramodal structure is generated by the presence of potassium ions in the precursor solution within the channels of the porous silica template; the size of the potassium ion templates the microporosity of a-MnO 2 , whereas their reactivity with silica leads to larger mesopores and macroporosity, without destroying the mesostructure of the template. The hierarchical tetramodal pore size distribution influences the properties of a-MnO 2 as a cathode in lithium batteries and as a catalyst, changing the behaviour, compared with its counterparts with only micropores or bimodal micro/mesopores. The approach has been extended to the preparation of LiMn 2 O 4 with a hierarchical pore structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗