Search NASA⌕ Search

Engineering topics

MacDowell, A. A.

Publications and source records attributed to MacDowell, A. A..

5 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

A tungsten external heater for BX90 diamond anvil cells with a range up to 1700 K

Resistive heating of a sample in a diamond anvil cell (DAC) can generate a homogeneous temperature field across the sample chamber with reliable temperatures measured by a thermocouple. It is of importance in experiments aiming at exploring phase diagrams and quantifying thermoelastic properties of materials. Here, we present a ring-heater design developed for BX90 diamond anvil cells (DACs). Furthermore, it is made of a ring-shaped aluminum oxide holder hosting a tungsten wire coil inside and coupled with Ar + 2% H 2 gas to prevent oxidation during experiment. This modular plug-and-play design enables in situ studies of samples via x-ray diffraction up to a temperature of 1700 K. Temperature in the BX90 sample volume as measured through a thermocouple was calibrated using the melting point of gold. As an application of this design, we report the thermal expansion coefficient of MgO at 9.5(1) GPa.

47 OTHER INSTRUMENTATION↗
DOE OSTI2018

Hartmann characterization of the PEEM-3 aberration-corrected X-ray photoemission electron microscope

Aberration correction by an electron mirror dramatically improves the spatial resolution and transmission of photoemission electron microscopes. We will review the performance of the recently installed aberration corrector of the X-ray Photoemission Electron Microscope PEEM-3 and show a large improvement in the efficiency of the electron optics. Hartmann testing is introduced as a quantitative method to measure the geometrical aberrations of a cathode lens electron microscope. Here, we find that aberration correction leads to an order of magnitude reduction of the spherical aberrations, suggesting that a spatial resolution of below 100 nm is possible at 100% transmission of the optics when using x-rays. We demonstrate this improved performance by imaging test patterns employing element and magnetic contrast.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Thermal expansion of SiC at high pressure-temperature and implications for thermal convection in the deep interiors of carbide exoplanets

Recent astrophysical observations have shown that some stars have sufficiently high carbon-to-oxygen ratios and may host planets composed mainly of carbides instead of silicates and oxides. From the low thermal expansion of SiC at 1 bar, it can be inferred that the buoyancy force of thermal anomalies is much lower in the carbide planets than in the silicate planets. However, numerous studies have shown that high pressure in planetary interiors can fundamentally change the physical properties of materials. In this work we have measured the pressure-volume-temperature relations of two SiC polymorphs (3C and 6H) at pressures and temperatures up to 80 GPa and 1900 K and 65 GPa and 1920 K, respectively, in the laser-heated diamond anvil cell combined with synchrotron X-ray diffraction. We found no evidence of dissociations of these phases up to our maximum pressure condition, supporting the stability of SiC to 1900 km depth in Earth-size Si-rich carbide planets. Following the Mie-Grüneisen approach, we fit our data to the Birch-Murnaghan or the Vinet equations of state combined with the Debye approach. We found that the pressure-induced change in the thermal expansion parameter of SiC is much smaller than that of Mg silicate perovskite (bridgmanite). Our new measurements suggest that the thermal buoyancy force may be stronger in the deep interiors of Si-rich carbide exoplanets than in the “Earth-like” silicate planets.

58 GEOSCIENCES↗
DOE OSTI2014

Coded aperture imaging for fluorescent x-rays

We employ a coded aperture pattern in front of a pixilated charge couple device detector to image fluorescent x-rays (6–25 KeV) from samples irradiated with synchrotron radiation. Coded apertures encode the angular direction of x-rays, and given a known source plane, allow for a large numerical aperture x-ray imaging system. The algorithm to develop and fabricate the free standing No-Two-Holes-Touching aperture pattern was developed. The algorithms to reconstruct the x-ray image from the recorded encoded pattern were developed by means of a ray tracing technique and confirmed by experiments on standard samples.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗