Engineering topics

Mach, Jeffrey J.

Publications and source records attributed to Mach, Jeffrey J..

3 records

NASA NTRS2018

Time-Varying Entry Heating Profile Replication with a Rotating Arc Jet Test Article

A new approach to arc jet testing that replicates the time-varying conditions of atmospheric entry heating was demonstrated. The concept relies on the spatial variation of heat flux and pressure around a cylindrical test article. The spatial variation is transformed to a temporal variation at one location by rotating the test article during exposure to the arc jet stream. The test article rotation mechanism is based on a programmable stepper motor. An entry heat flux profile was mapped to the cylinders heat flux distribution to determine the rotation angle vs. time executed by the mechanism. A series of arc jet tests with instrumented cylindrical TPS test articles was conducted to prove the concept.

Aerothermodynamics↗

NASA NTRS2014

Time-varying Entry Heating Profile Replication with a Rotating Arc Jet Test Article

A new approach for arc jet testing of thermal protection materials at conditions approximating the time-varying conditions of atmospheric entry was developed and demonstrated. The approach relies upon the spatial variation of heat flux and pressure over a cylindrical test model. By slowly rotating a cylindrical arc jet test model during exposure to an arc jet stream, each point on the test model will experience constantly changing applied heat flux. The predicted temporal profile of heat flux at a point on a vehicle can be replicated by rotating the cylinder at a prescribed speed and direction. An electromechanical test model mechanism was designed, built, and operated during an arc jet test to demonstrate the technique.

Thermal protection materials↗

NASA NTRS2011

Bulk Enthalpy Calculations in the Arc Jet Facility at NASA ARC

The Arc Jet Facilities at NASA Ames Research Center generate test streams with enthalpies ranging from 5 MJ/kg to 25 MJ/kg. The present work describes a rigorous method, based on equilibrium thermodynamics, for calculating the bulk enthalpy of the flow produced in two of these facilities. The motivation for this work is to determine a dimensionally-correct formula for calculating the bulk enthalpy that is at least as accurate as the conventional formulas that are currently used. Unlike previous methods, the new method accounts for the amount of argon that is present in the flow. Comparisons are made with bulk enthalpies computed from an energy balance method. An analysis of primary facility operating parameters and their associated uncertainties is presented in order to further validate the enthalpy calculations reported herein.

Thompson, Corinna S.↗