Engineering topics

Magneville, C.

Publications and source records attributed to Magneville, C..

15 records

DOE OSTI2026

Cosmological neutrino mass: a frequentist overview in light of DESI

We derive constraints on the neutrino mass using a variety of recent cosmological datasets, including DESI BAO, the full-shape analysis of the DESI matter power spectrum and the one-dimensional power spectrum of the Lyman-α forest (P1D) from eBOSS quasars as well as the cosmic microwave background (CMB). The constraints are obtained in the frequentist formalism by constructing profile likelihoods and applying the Feldman-Cousins prescription to compute confidence intervals. This method avoids potential prior and volume effects that may arise in a comparable Bayesian analysis. Parabolic fits to the profiles allow one to distinguish changes in the upper limits from variations in the constraining power σ of the different data combinations. We find that all profiles in the ΛCDM model are cut off by the ∑m ν ≥ 0 bound, meaning that the corresponding parabolas reach their minimum in the unphysical sector. The most stringent 95% C.L. upper limit is obtained by the combination of DESI DR2 BAO, Planck PR4 and CMB lensing at 53 meV, below the minimum of 59 meV set by the normal ordering. The corresponding constraining power σ is 43 meV, which highlights the importance of the cut-off by negative values in the determination of the upper limit. Extending ΛCDM to non-zero curvature and w 0 w a CDM relaxes the constraints past 59 meV again, but only w 0 w a CDM exhibits profiles with a minimum at a positive value. Additionally, we extend the formalism to constrain the lightest neutrino mass. For DESI DR2 BAO, Planck PR4 and CMB lensing, we find confidence limits at 20 and 19 meV for normal and inverted ordering, respectively. Using a combination of DESI DR1 full-shape, BBN and eBOSS Lyman-α P1D, we successfully constrain the neutrino mass independently of the CMB. This combination yields m l ≤ 97 and 98 meV in the normal and inverted orderings, and total neutrino mass ∑m ν ≤ 285 meV (95% C.L.). The addition of DESI full-shape or Lyman-α P1D to CMB and DESI BAO results in small but noticeable improvement of the constraining power of the data. Lyman-α free-streaming measurements especially improve the constraint. Since they are based on eBOSS data, this sets a promising precedent for upcoming DESI data.

Frequentist statistics↗

DOE OSTI2025

The effects of continuum fitting on Lyman-α forest correlations

Correlations of fluctuations of the flux in Lyman-α forests of high-redshift quasars have been observed by the Baryonic Acoustic Oscillation Spectroscopy Survey (BOSS) and the Dark Energy Spectroscopy Instrument (DESI) survey where they have revealed the effects of baryon acoustic oscillations (BAO). In order to fit the correlation functions to a physical model and thereby constrain cosmological parameters, it is necessary to take into account the effects of fitting the observed spectra to a template about which the fluctuations are measured. In this paper we use mock spectra to test the distortion matrix technique that has been used since the final BOSS data release to appropriately distort the models. We show that while percent-level effects on the derived forest bias parameters may be present, the technique works sufficiently well that the determination of the BAO peak position is not affected at the percent level. We introduce modifications in the technique used by DESI that were not in the original applications and suggest further possibilities for improvements.

Lyman alpha forest↗

DOE OSTI2025

A sound horizon-free measurement of H 0 in DESI 2024

The physical size of the sound horizon at recombination is a powerful source of information for early-time measurements of the Hubble constant H 0 , and many proposed solutions to the Hubble tension therefore involve modifications to this scale. In light of this, there has been growing interest in measuring H 0 independently of the sound horizon. We present the first such measurement to use data from the Dark Energy Spectroscopic Instrument (DESI), jointly analyzing the full-shape galaxy power spectra of DESI luminous red galaxies, emission line galaxies, quasars, and the bright galaxy sample, in a total of six redshift bins. Information from the sound horizon scale is removed from our constraints via a rescaling procedure at the power spectrum level, with our sound horizon-marginalized measurement being driven instead primarily by the matter-radiation equality scale. This measurement is then combined with additional sound horizon-free information from Planck+ACT CMB lensing, uncalibrated type Ia supernovae, and the DESI Lyman-α forest. We agnostically combine with the DESY5, Pantheon+, and Union3 supernova datasets, with our tightest respective constraints being H 0 = 66.7 +1.7 -1.9 , 67.9 +1.9 -2.1 , and 67.8 +2.0 -2.2 km s -1 Mpc -1 . This corresponds to a sub-3% sound horizon-free constraint of the Hubble constant, and is the most precise measurement of its kind to date. Even without including information from the sound horizon, our measurement is still in 2.2-3.0σ tension with SH0ES. Additionally, the consistency between our result and other measurements that do rely on the sound horizon scale provides no evidence for new early-Universe physics (e.g. early dark energy). Future DESI data releases will allow unprecedented measurements of H 0 and place strong constraints on models that use beyond-ΛCDM physics to ameliorate the Hubble tension.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2025

Full-Shape analysis of the power spectrum and bispectrum of DESI DR1 LRG and QSO samples

We present the first joint analysis of the power spectrum and bispectrum using the Data Release 1 (DR1) of the Dark Energy Spectroscopic Instrument (DESI), focusing on Luminous Red Galaxies (LRGs) and quasars (QSOs) across a redshift range of 0.4 ≤ z ≤ 2.1. By combining the two- and three-point statistics, we are able to partially break the degeneracy between the logarithmic growth rate, f(z), and the amplitude of dark matter fluctuations, σ s8 (z), which cannot be measured separately in analyses that only involve the power spectrum. In comparison with the (fiducial) Planck ΛCDM cosmology we obtain f/f fid = {0.888 -0.089 +0.186 ,0.977 -0.220 +0.182 ,1.030 -0.085 +0.368 }, σ s8 /σ fid s8 = {1.224 -0.133 +0.091 ,1.071 -0.163 +0.278 ,1.00 0 -0.223 +0.088 } respectively for the three LRG redshift bins, corresponding to a cumulative 10.1% constraint on f, and of 8.4% on σ s8 , including the systematic error budget. Additionally, we obtain constraints for the ShapeFit compressed parameters describing the isotropic scaling parameter, α iso (z), the Alcock-Paczyński parameter, α AP (z), the combined growth of structure parameter fσ s8 (z), and the combined shape parameter m(z)+n(z). Their cumulative constraints from our joint power spectrum-bispectrum analysis are respectively σ αiso = 0.9% (9% improvement with respect to our power spectrum-only analysis); σ α AP = 2.3% (no improvement with respect to power spectrum-only analysis, which is expected given that the bispectrum monopole has no significant anisotropic signal); σ fσs8 = 5.1% (9% improvement); σ m+n = 2.3% (11% improvement). These results are fully consistent with the main DESI power spectrum analysis, demonstrating the robustness of the DESI cosmological constraints, and compatible with Planck ΛCDM cosmology.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

The clustering of Lyman Alpha Emitting galaxies at 𝗓=2–3

Here, we measure the clustering of Lyman Alpha Emitting galaxies (LAEs) selected from the One-hundred-square-degree DECam Imaging in Narrowbands (ODIN) survey, with spectroscopic follow-up from Dark Energy Spectroscopic Instrument (DESI). We use DESI spectroscopy to optimize our selection and to constrain the interloper fraction and redshift distribution of our narrow-band selected sources. We select samples of 4000 LAEs at z = 2.45 and 3.1 in 9 sq. deg. centered on the COSMOS field with median Lyα fluxes of ≈ 10 -16 erg s -1 cm -2 . Covariances and cosmological inferences are obtained from a series of mock catalogs built upon high-resolution N-body simulations that match the footprint, number density, redshift distribution and observed clustering of the sample. We find that both samples have a correlation length of r 0 = 3.0 ± 0.2 h -1 Mpc. Within our fiducial cosmology these correspond to 3D number densities of ≈ 10 -3 h 3 Mpc -3 and, from our mock catalogs, biases of 1.7 and 2.0 at z= 2.45 and 3.1, respectively. We discuss the implications of these measurements for the use of LAEs as large-scale structure tracers for high-redshift cosmology.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Broad absorption line quasars in the Dark Energy Spectroscopic Instrument Early Data Release

Broad absorption line (BAL) quasars are characterized by gas clouds that absorb flux at the wavelength of common quasar spectral features, although blueshifted by velocities that can exceed $0.1c$. BAL features are interesting as signatures of significant feedback, yet they can also compromise cosmological studies with quasars by distorting the shape of the most prominent quasar emission lines, impacting redshift accuracy and measurements of the matter density distribution traced by the Lyman $\alpha$ forest. We present a catalogue of BAL quasars discovered in the Dark Energy Spectroscopic Instrument (DESI) survey Early Data Release, which were observed as part of DESI Survey Validation, as well as the first two months of the main survey. We describe our method to automatically identify BAL quasars in DESI data, the quantities we measure for each BAL, and investigate the completeness and purity of this method with mock DESI observations. We mask the wavelengths of the BAL features and re-evaluate each BAL quasar redshift, finding new redshifts which are $243\, {\rm km}\, {\rm s}^{-1}$ smaller on average for the BAL quasar sample. These new, more accurate redshifts are important to obtain the best measurements of quasar clustering, especially at small scales. Finally, we present some spectra of rarer classes of BALs that illustrate the potential of DESI data to identify such populations for further study.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

The Lyman-α forest catalogue from the Dark Energy Spectroscopic Instrument Early Data Release

We present and validate the catalogue of Lyman-α forest fluctuations for 3D analyses using the Early Data Release (EDR) from the Dark Energy Spectroscopic Instrument (DESI) survey. We used 88 511 quasars collected from DESI Survey Validation (SV) data and the first two months of the main survey (M2). We present several improvements to the method used to extract the Lyman-α absorption fluctuations performed in previous analyses from the Sloan Digital Sky Survey (SDSS). In particular, we modify the weighting scheme and show that it can improve the precision of the correlation function measurement by more than 20 percent. This catalogue can be downloaded from https://data.desi.lbl.gov/public/edr/vac/edr/lya/fuji/v0.3, and it will be used in the near future for the first DESI measurements of the 3D correlations in the Lyman-α forest.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Astrometric Calibration and Performance of the Dark Energy Spectroscopic Instrument Focal Plane

Abstract The Dark Energy Spectroscopic Instrument, consisting of 5020 robotic fiber positioners and associated systems on the Mayall telescope at Kitt Peak, Arizona, is carrying out a survey to measure the spectra of 40 million galaxies and quasars and produce the largest 3D map of the universe to date. The primary science goal is to use baryon acoustic oscillations to measure the expansion history of the universe and the time evolution of dark energy. A key function of the online control system is to position each fiber on a particular target in the focal plane with an accuracy of 11 μ m rms 2D. This paper describes the set of software programs used to perform this function along with the methods used to validate their performance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2023

Performance of the Quasar Spectral Templates for the Dark Energy Spectroscopic Instrument

Abstract Millions of quasar spectra will be collected by the Dark Energy Spectroscopic Instrument (DESI), leading to a fourfold increase in the number of known quasars. High-accuracy quasar classification is essential to tighten constraints on cosmological parameters measured at the highest redshifts DESI observes ( z > 2.0). We present spectral templates for identification and redshift estimation of quasars in the DESI Year 1 data release. The quasar templates are comprised of two quasar eigenspectra sets, trained on spectra from the Sloan Digital Sky Survey. The sets are specialized to reconstruct quasar spectral variation observed over separate yet overlapping redshift ranges and, together, are capable of identifying DESI quasars from 0.05 < z < 7.0. The new quasar templates show significant improvement over the previous DESI quasar templates regarding catastrophic failure rates, redshift precision and accuracy, quasar completeness, and the contamination fraction in the final quasar sample.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

The Spectroscopic Data Processing Pipeline for the Dark Energy Spectroscopic Instrument

Abstract We describe the spectroscopic data processing pipeline of the Dark Energy Spectroscopic Instrument (DESI), which is conducting a redshift survey of about 40 million galaxies and quasars using a purpose-built instrument on the 4 m Mayall Telescope at Kitt Peak National Observatory. The main goal of DESI is to measure with unprecedented precision the expansion history of the universe with the baryon acoustic oscillation technique and the growth rate of structure with redshift space distortions. Ten spectrographs with three cameras each disperse the light from 5000 fibers onto 30 CCDs, covering the near-UV to near-infrared (3600–9800 Å) with a spectral resolution ranging from 2000 to 5000. The DESI data pipeline generates wavelength- and flux-calibrated spectra of all the targets, along with spectroscopic classifications and redshift measurements. Fully processed data from each night are typically available to the DESI collaboration the following morning. We give details about the pipeline’s algorithms, and provide performance results on the stability of the optics, the quality of the sky background subtraction, and the precision and accuracy of the instrumental calibration. This pipeline has been used to process the DESI Survey Validation data set, and has exceeded the project’s requirements for redshift performance, with high efficiency and a purity greater than 99% for all target classes.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Target Selection and Validation of DESI Emission Line Galaxies

The Dark Energy Spectroscopic Instrument (DESI) will precisely constrain cosmic expansion and the growth of structure by collecting ~40 million extragalactic redshifts across ~80% of cosmic history and one-third of the sky. The Emission Line galaxy (ELG) sample, which will comprise about one-third of all DESI tracers, will be used to probe the universe over the 0.6 < z < 1.6 range, including the 1.1 < z < 1.6 range, which is expected to provide the tightest constraints. We present the target selection for the DESI Survey Validation (SV) and Main Survey ELG samples, which relies on the imaging of the Legacy Surveys. The Main ELG selection consists of a g-band magnitude cut and a (g – r) versus (r – z) color box, while the SV selection explores extensions of the Main selection boundaries. The Main ELG sample is composed of two disjoint subsamples, which have target densities of about 1940 deg –2 and 460 deg –2 , respectively. We first characterize their photometric properties and density variations across the footprint. We then analyze the DESI spectroscopic data that have been obtained from 2020 December to 2021 December in the SV and Main Survey. We establish a preliminary criterion for selecting reliable redshifts, based on the [O ιι] flux measurement, and assess its performance. Using this criterion, we are able to present the spectroscopic efficiency of the Main ELG selection, along with its redshift distribution. We thus demonstrate that the Main selection 1940 deg –2 subsample alone should provide 400 deg –2 and 460 deg –2 reliable redshifts in the 0.6 < z < 1.1 and the 1.1 < z < 1.6 ranges, respectively.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

The DESI Survey Validation: Results from Visual Inspection of the Quasar Survey Spectra

Abstract A key component of the Dark Energy Spectroscopic Instrument (DESI) survey validation (SV) is a detailed visual inspection (VI) of the optical spectroscopic data to quantify key survey metrics. In this paper we present results from VI of the quasar survey using deep coadded SV spectra. We show that the majority (≈70%) of the main-survey targets are spectroscopically confirmed as quasars, with ≈16% galaxies, ≈6% stars, and ≈8% low-quality spectra lacking reliable features. A nonnegligible fraction of the quasars are misidentified by the standard spectroscopic pipeline, but we show that the majority can be recovered using post-pipeline “afterburner” quasar-identification approaches. We combine these “afterburners” with our standard pipeline to create a modified pipeline to increase the overall quasar yield. At the depth of the main DESI survey, both pipelines achieve a good-redshift purity (reliable redshifts measured within 3000 km s −1 ) of ≈99%; however, the modified pipeline recovers ≈94% of the visually inspected quasars, as compared to ≈86% from the standard pipeline. We demonstrate that both pipelines achieve a median redshift precision and accuracy of ≈100 km s −1 and ≈70 km s −1 , respectively. We constructed composite spectra to investigate why some quasars are missed by the standard pipeline and find that they are more host-galaxy dominated (i.e., distant analogs of “Seyfert galaxies”) and/or more dust reddened than the standard-pipeline quasars. We also show example spectra to demonstrate the overall diversity of the DESI quasar sample and provide strong-lensing candidates where two targets contribute to a single spectrum.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

The DESI Survey Validation: Results from Visual Inspection of Bright Galaxies, Luminous Red Galaxies, and Emission-line Galaxies

The Dark Energy Spectroscopic Instrument (DESI) Survey has obtained a set of spectroscopic measurements of galaxies to validate the final survey design and target selections. To assist in these tasks, we visually inspect DESI spectra of approximately 2500 bright galaxies, 3500 luminous red galaxies (LRGs), and 10,000 emission-line galaxies (ELGs) to obtain robust redshift identifications. We then utilize the visually inspected redshift information to characterize the performance of the DESI operation. Based on the visual inspection (VI) catalogs, our results show that the final survey design yields samples of bright galaxies, LRGs, and ELGs with purity greater than 99%. Moreover, we demonstrate that the precision of the redshift measurements is approximately 10 km s –1 for bright galaxies and ELGs and approximately 40 km s –1 for LRGs. The average redshift accuracy is within 10 km s –1 for the three types of galaxies. The VI process also helps improve the quality of the DESI data by identifying spurious spectral features introduced by the pipeline. Finally, we show examples of unexpected real astronomical objects, such as Ly α emitters and strong lensing candidates, identified by VI. These results demonstrate the importance and utility of visually inspecting data from incoming and upcoming surveys, especially during their early operation phases.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Target Selection and Validation of DESI Luminous Red Galaxies

The Dark Energy Spectroscopic Instrument (DESI) is carrying out a five-year survey that aims to measure the redshifts of tens of millions of galaxies and quasars, including 8 million luminous red galaxies (LRGs) in the redshift range 0.4 < z ≲ 1.0. Here we present the selection of the DESI LRG sample and assess its spectroscopic performance using data from Survey Validation (SV) and the first two months of the Main Survey. The DESI LRG sample, selected using g, r, z, and W1 photometry from the DESI Legacy Imaging Surveys, is highly robust against imaging systematics. The sample has a target density of 605 deg -2 and a comoving number density of 5 × 10 -4 h 3 Mpc -3 in 0.4 < z < 0.8; this is a significantly higher density than previous LRG surveys (such as SDSS, BOSS, and eBOSS) while also extending to z ~ 1. After applying a bright star veto mask developed for the sample, 98.9% of the observed LRG targets yield confident redshifts (with a catastrophic failure rate of 0.2% in the confident redshifts), and only 0.5% of the LRG targets are stellar contamination. The LRG redshift efficiency varies with source brightness and effective exposure time, and we present a simple model that accurately characterizes this dependence. In the appendices, we describe the extended LRG samples observed during SV.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2022

New limits from microlensing on Galactic black holes in the mass range 10 M ⊙ < M < 1000 M ⊙

We searched for long-duration microlensing events originating from intermediate-mass black holes (BH) in the halo of the Milky Way, using archival data from the EROS-2 and MACHO photometric surveys towards the Large Magellanic Cloud (LMC). We combined data from these two surveys to create a common database of light curves for 14.1 million objects in the LMC, covering a total duration of 10.6 years, with flux series measured in four wide passbands. We carried out a microlensing search on these light curves, complemented by the light curves of 22.7 million objects, observed only by EROS-2 or only by MACHO, over about 7 years, with flux series measured in only two passbands. A likelihood analysis, taking into account the LMC self-lensing and Milky Way disk contributions, allows us to conclude that compact objects with masses in the range 10 – 100 M ⊙ cannot make up more than ~15% of a standard halo total mass (at a 95% confidence level). Our analysis sensitivity weakens for heavier objects, although we still rule out the possibility of ~50% of the halo being made of ~1000 M ⊙ BHs. Combined with previous EROS results, an upper limit of ~15% of the total halo mass can be obtained for the contribution of compact halo objects in the mass range 10 –6 – 10 2 M ⊙ .

79 ASTRONOMY AND ASTROPHYSICS↗