Active States During the Reduction of CO 2 by a MoS 2 Electrocatalyst
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Engineering topics
Majidi, Leily
Publications and source records attributed to Majidi, Leily.
A KMnO 4 -Generated Colloidal Electrolyte for Redox Mediation and Anode Protection in a Li–Air Battery
The rechargeable lithium-oxygen (Li-O 2 ) battery has the highest theoretical specific energy density of any rechargeable batteries and could transform energy storage systems if a practical device could be attained. However, among numerous challenges, which are all interconnected, are polarization due to sluggish kinetics, low cycle life, small capacity, and slow rates. Here, in this study, we report on use of KMnO 4 to generate a colloidal electrolyte made up of MnO 2 nanoparticles. The resulting electrolyte provides a redox mediator for reducing the charge potential and lithium anode protection to increase cycle life. This electrolyte in combination with a stable binary transition metal dichalcogenide alloy, Nb 0.5 Ta 0.5 S 2 , as the cathode enables the operation of a Li-O 2 battery at a current density of 1 mA center dot cm -2 and specific capacity ranging from 1000 to 10000 mA center dot h center dot g -1 (corresponding to 0.1-1 mA center dot h center dot cm -2 ) in a dry air environment with a cycle life of up to 150. This colloidal electrolyte provides a robust approach for advancing Li-air batteries.
25 ENERGY STORAGE↗
Novel Co‐Catalytic Activities of Solid and Liquid Phase Catalysts in High‐Rate Li‐Air Batteries
Abstract Li‐air batteries are considered strong candidates for the next‐generation energy storage systems designed for electrical transportation. However, low cyclability and current rates are two major drawbacks that hinder them from further realization. These issues necessitate the discovery of novel materials to significantly enhance the redox process of discharge products. In this study, a novel catalytic system comprised of tin sulfide (SnS) nanoflakes as a solid catalyst and tin iodide (SnI 2 ) as a dual‐functional electrolyte additive is discovered. This system enables operating the battery at high current rates up to 10 000 mA g −1 (corresponding to 1 mA cm −2 ). The SnS catalyst shows outstanding catalytic activity for both oxygen reduction and evolution reactions compared to carbon, noble metals, and other transition metal dichalcogenides. It also exhibits good structural integrity at high rates. The computations indicate numerous possible oxygen reduction sites without oxygen dissociations on the SnS surface through solution mechanism that is likely responsible for the formation of Li 2 O 2 . The calculations also indicate that the role of the SnI 2 is not only reacting with the lithium anode to provide protection but reducing the charge potential by promoting catalytic decomposition of the Li 2 O 2 . This work provides new novel additives for designing high‐rate Li‐air batteries.
25 ENERGY STORAGE↗
Unprecedented Multifunctionality in 1D Nb 1- x Ta x S 3 Transition Metal Trichalcogenide Alloy
One-dimensional (1D) van der Waals materials, such as nanofibers or nanoribbons are considered as the future ultimate limit of downscaling for modern electrical and electrochemical devices. Here, for the first time, we successfully synthesize nanofibers of a solid solution transition metal trichalcogenide (TMTC), Nb 1-x Ta x S 3 , with outstanding electrical, thermal, and electrochemical characteristics rivaling the performance of the-state-of-the art materials for each application. This material shows nearly unchanged sheet resistance (≈740 Ω/sq -1 ) versus bending cycles tested up to 90 cycles, stable sheet resistance in ambient conditions tested up to 60 days, remarkably high electrical breakdown current density of ≈ 30 MA cm -2 , strong evidence of successive charge density wave (CDW) transitions, and outstanding thermal stability up to ≈900 K. Additionally, this material demonstrates excellent activity and selectivity for CO2 conversion to CO reaching ≈ 350 mA cm -2 at – 0.8 V vs RHE with an outstanding turnover frequency number of 25 for CO formation. It also exhibits an excellent performance in a high-rate Li-air battery with the specific capacity of 3000 mAhg -1 at a high current density of 0.3 mAcm -2 . This study uncovers the multifunctionality in 1D TMTC alloys for a wide range of high-impact applications and opens a new direction for the design of the next generation of low-dimensional materials with high performance.
36 MATERIALS SCIENCE↗
Nanostructured Conductive Metal Organic Frameworks for Sustainable Low Charge Overpotentials in Li–Air Batteries
Lithium-oxygen batteries are among the most attractive alternatives for future electrified transportation. However, their practical application is hindered by many obstacles. Due to the insulating nature of Li 2 O 2 product and the slow kinetics of reactions, attaining sustainable low charge overpotentials at high rates becomes a challenge resulting in the battery's early failure and low round trip efficiency. Herein, outstanding characteristics are discovered of a conductive metal organic framework (c-MOF) that promotes the growth of nanocrystalline Li 2 O 2 with amorphous regions. This provides a platform for the continuous growth of Li 2 O 2 units away from framework, enabling a fast discharge at high current rates. Moreover, the Li 2 O 2 structure works in synergy with the redox mediator (RM). The conductivity of the amorphous regions of the Li 2 O 2 allows the RM to act directly on the Li 2 O 2 surface instead of catalyst edges and then transport through the electrolyte to the Li 2 O 2 surface. This direct charge transfer enables a small charge potential of <3.7 V under high current densities (1-2 A g -1 ) sustained for a long cycle life (100-300 cycles) for large capacities (1000-2000 mAh g -1 ). These results open a new direction for utilizing c-MOFs towards advanced energy storage systems.
25 ENERGY STORAGE↗
High Performance Air Breathing Flexible Lithium–Air Battery
Lithium–oxygen (Li–O 2 ) batteries possess the highest theoretical energy density (3500 Wh kg –1 ), which makes them attractive candidates for modern electronics and transportation applications. In this work, an inexpensive, flexible, and wearable Li–O 2 battery based on the bifunctional redox mediator of InBr 3 , MoS 2 cathode catalyst, and Fomblin-based oxygen permeable membrane that enable long-cycle-life operation of the battery in pure oxygen, dry air, and ambient air is designed, fabricated, and tested. The battery operates in ambient air with an open system air-breathing architecture and exhibits excellent cycling up to 240 at the high current density of 1 A g –1 with a relative humidity of 75%. The electrochemical performance of the battery including deep-discharge capacity, and rate capability remains almost identical after 1000 cycle in a bending fatigue test. Furthermore, this finding opens a new direction for utilizing high performance Li–O 2 batteries for applications in the field of flexible and wearable electronics.
25 ENERGY STORAGE↗
2D High‐Entropy Transition Metal Dichalcogenides for Carbon Dioxide Electrocatalysis
Abstract High‐entropy alloys combine multiple principal elements at a near equal fraction to form vast compositional spaces to achieve outstanding functionalities that are absent in alloys with one or two principal elements. Here, the prediction, synthesis, and multiscale characterization of 2D high‐entropy transition metal dichalcogenide (TMDC) alloys with four/five transition metals is reported. Of these, the electrochemical performance of a five‐component alloy with the highest configurational entropy, (MoWVNbTa)S 2 , is investigated for CO 2 conversion to CO, revealing an excellent current density of 0.51 A cm −2 and a turnover frequency of 58.3 s −1 at ≈ −0.8 V versus reversible hydrogen electrode. First‐principles calculations show that the superior CO 2 electroreduction is due to a multi‐site catalysis wherein the atomic‐scale disorder optimizes the rate‐limiting step of CO desorption by facilitating isolated transition metal edge sites with weak CO binding. 2D high‐entropy TMDC alloys provide a materials platform to design superior catalysts for many electrochemical systems.
Cavin, John↗
Enhancing the performance of lithium oxygen batteries through combining redox mediating salts with a lithium protecting salt
Li–O 2 batteries have recently emerged to meet nowadays elevated electric energy demands. Redox mediators (RMs) for solution-inducing decomposition of discharge products are one approach to increase energy efficiency and reduce high overpotentials in these batteries. However, multiple obstacles hinder their usage such as redox shuttling, capacity fading, electrolyte degradation, etc. Herein, we present a new chemistry based on a combination of LiNO 3 , TEGDME and an ionic liquid that enables LiI (1 M) to lower the charge potential (3.5V) with a long cycle life of 270 cycles. 0.1 M LiI increases the cyclability up to 500 with a slightly increased charge potential (~4V) for a fixed capacity of 1000 mAh/g. Up to 100 cycles, this battery system retained ~95% Li 2 O 2 capacity with a ~0.8 V charge-discharge polarization gap. The addition of LiNO 3 to the electrolyte provides a protective solid electrolyte interface (SEI) on anode that works in synergy with the LiI RM. Moreover, we found that this electrolyte blend results in domain formation of ionic and neutral species enhancing the discharge and charge processes. Finally, DFT calculations provide a better understanding of the role of the anode SEI layer and the Li 2 O 2 decomposition promoted by the LiI during charge on the cathode.
25 ENERGY STORAGE↗
2D Copper Tetrahydroxyquinone Conductive Metal–Organic Framework for Selective CO 2 Electrocatalysis at Low Overpotentials
Abstract Metal–organic frameworks (MOFs) are promising materials for electrocatalysis; however, lack of electrical conductivity in the majority of existing MOFs limits their effective utilization in the field. Herein, an excellent catalytic activity of a 2D copper (Cu)‐based conductive MOF, copper tetrahydroxyquinone (CuTHQ), is reported for aqueous CO 2 reduction reaction (CO 2 RR) at low overpotentials. It is revealed that CuTHQ nanoflakes (NFs) with an average lateral size of 140 nm exhibit a negligible overpotential of 16 mV for the activation of this reaction, a high current density of ≈173 mA cm −2 at −0.45 V versus RHE, an average Faradaic efficiency (F.E.) of ≈91% toward CO production, and a remarkable turnover frequency as high as ≈20.82 s −1 . In the low overpotential range, the obtained CO formation current density is more than 35 and 25 times higher compared to state‐of‐the‐art MOF and MOF‐derived catalysts, respectively. The operando Cu K‐edge X‐ray absorption near edge spectroscopy and density functional theory calculations reveal the existence of reduced Cu (Cu + ) during CO 2 RR which reversibly returns to Cu 2+ after the reaction. The outstanding CO 2 catalytic functionality of conductive MOFs (c‐MOFs) can open a way toward high‐energy‐density electrochemical systems.
Majidi, Leily↗
High-Rate Long Cycle-Life Li-Air Battery Aided by Bifunctional InX3 (X = I and Br) Redox Mediators
Redox mediators (RMs) are solution-based additives that have been extensively used to reduce the charge potential and increase the energy efficiency of Li–oxygen (Li–O 2 ) batteries. However, in the presence of RMs, achieving a long cycle-life operation of Li–O 2 batteries at a high current rate is still a major challenge. In this study, we discover a novel synergy among InX 3 (X = I and Br) bifunctional RMs, molybdenum disulfide (MoS 2 ) nanoflakes as the air electrode, dimethyl sulfoxide/ionic liquid hybrid electrolyte, and LiTFSI as a salt to achieve long cycle-life operations of Li–O 2 batteries in a dry air environment at high charge–discharge rates. Our results indicate that batteries with InI3 operate up to 450 cycles with a current density of 0.5 A g –1 and 217 cycles with a current density of 1 A g –1 at a fixed capacity of 1 A h g –1 . Batteries with InBr 3 operate up to 600 cycles with a current density of 1 A g –1 . These batteries can also operate at a higher charge rate of 2 A g –1 up to 200 cycles (for InBr 3 ) and 160 cycles (for InI 3 ). Our experimental and computational results reveal that while X 3 – is the source of the redox mediator, LiX at the MoS 2 cathode, In 3+ reacts on the lithium anode side to form a protective layer on the surface, thus acting as an effective bifunctional RM in a dry air environment. This evidence for a simultaneous improvement in the current rates and cycle life of a battery in a dry air atmosphere opens a new direction for research for advanced energy storage systems.
25 ENERGY STORAGE↗
Phase‐Dependent Band Gap Engineering in Alloys of Metal‐Semiconductor Transition Metal Dichalcogenides
Abstract Bandgap engineering plays a critical role in optimizing the electrical, optical and (photo)‐electrochemical applications of semiconductors. Alloying has been a historically successful way of tuning bandgaps by making solid solutions of two isovalent semiconductors. In this work, a novel form of bandgap engineering involving alloying non‐isovalent cations in a 2D transition metal dichalcogenide (TMDC) is presented. By alloying semiconducting MoSe 2 with metallic NbSe 2 , two structural phases of Mo 0.5 Nb 0.5 Se 2 , the 1T and 2H phases, are produced each with emergent electronic structure. At room temperature, it is observed that the 1T and 2H phases are semiconducting and metallic, respectively. For the 1T structure, scanning tunneling microscopy/spectroscopy (STM/STS) is used to measure band gaps in the range of 0.42–0.58 at 77 K. Electron diffraction patterns of the 1T structure obtained at room temperature show the presence of a nearly commensurate charge density wave (NCCDW) phase with periodic lattice distortions that result in an uncommon 4 × 4 supercell, rotated approximately 4° from the lattice. Density‐functional‐theory calculations confirm that local distortions, such as those in a NCCDW, can open up a band gap in 1T ‐Mo 0.5 Nb 0.5 Se 2 , but not in the 2H phase. This work expands the boundaries of alloy‐based bandgap engineering by introducing a novel technique that facilitates CDW phases through alloying.
Wang, Shuxi↗
Quasi‐Binary Transition Metal Dichalcogenide Alloys: Thermodynamic Stability Prediction, Scalable Synthesis, and Application
Abstract Transition metal dichalcogenide (TMDCs) alloys could have a wide range of physical and chemical properties, ranging from charge density waves to superconductivity and electrochemical activities. While many exciting behaviors of unary TMDCs have been demonstrated, the vast compositional space of TMDC alloys has remained largely unexplored due to the lack of understanding regarding their stability when accommodating different cations or chalcogens in a single‐phase. Here, a theory‐guided synthesis approach is reported to achieve unexplored quasi‐binary TMDC alloys through computationally predicted stability maps. Equilibrium temperature–composition phase diagrams using first‐principles calculations are generated to identify the stability of 25 quasi‐binary TMDC alloys, including some involving non‐isovalent cations and are verified experimentally through the synthesis of a subset of 12 predicted alloys using a scalable chemical vapor transport method. It is demonstrated that the synthesized alloys can be exfoliated into 2D structures, and some of them exhibit: i) outstanding thermal stability tested up to 1230 K, ii) exceptionally high electrochemical activity for the CO 2 reduction reaction in a kinetically limited regime with near zero overpotential for CO formation, iii) excellent energy efficiency in a high rate Li–air battery, and iv) high break‐down current density for interconnect applications. This framework can be extended to accelerate the discovery of other TMDC alloys for various applications.
Hemmat, Zahra↗
Highly Active Rhenium-, Ruthenium-, and Iridium-Based Dichalcogenide Electrocatalysts for Oxygen Reduction and Oxygen Evolution Reactions in Aprotic Media
Transition metal dichalcogenides (TMDCs) have garnered much attention recently due to their remarkable performance for different electrochemical systems. In this study, we report on the synthesis and catalysis of less studied TMDC nanoflakes (NFs) with a design space comprised of three transition metals (rhenium, ruthenium, and iridium) and three chalcogens (sulfur, selenium, and tellurium) for the oxygen reduction and evolution reactions (ORR and OER) in an aprotic hybrid electrolyte containing 0.1 M lithium bis(trifluoromethanesulfonypimide salt in 1-ethyl-3-methylimidazolium tetrafluoroborate ionic liquid and dimethyl sulfoxide. Our results indicate that among the tested catalysts, ReS2 exhibits the highest current density for both ORR and OER, beyond those of the state-of-the-art catalysts used in aprotic media with Li salts. We performed density functional calculations to provide a mechanistic understanding of the reactions in the ReS2 NFs/ionic liquid system. These novel bifunctional catalyst results could open a way for exploiting the unique properties of these materials in Li-O-2 batteries as well as other important electrochemical systems.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗