Search NASA⌕ Search

Engineering topics

Maksymovych, Petro

Publications and source records attributed to Maksymovych, Petro.

34 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Simultaneous mapping of nanoscale dielectric, electrochemical, and ferroelectric surface properties of van der Waals layered ferroelectric via advanced SPM

Ferroelectric surfaces involve a complex interplay between polarization and dielectric properties, internal and external surface charge screening, and ionic and electrochemical effects. There is currently no good way to simultaneously capture all the required information at appropriate length scales. To this end, we present an advanced scanning probe microscopy approach for simultaneously mapping surface potential, dielectric, and piezoelectric properties on the nanoscale. For quantitatively mapping electromechancial properties, we utilize interferometric displacement sensing piezoresponse force microscopy, which measures the effective piezoelectric coefficient free of background artifacts such as the cantilever body electrostatics. The dielectric and surface electrochemical properties are captured during G-mode electrostatic force microscopy/Kelvin probe force microscopy operated in the lift mode. We show the capabilities of this approach on the chemically phase separated composite sample consisting of a van der Waals layered ferroelectric CuInP 2 S 6 phase and a non-polar In 4/3 P 2 S 6 phase. Finally, we demonstrate domain structure evolution during thermally stimulated phase transition.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Tunable Microwave Conductance of Nanodomains in Ferroelectric PbZr 0.2 Ti 0.8 O 3 Thin Film

Ferroelectric materials exhibit spontaneous polarization that can be switched by electric field. Beyond traditional applications as nonvolatile capacitive elements, the interplay between polarization and electronic transport in ferroelectric thin films has enabled a path to neuromorphic device applications involving resistive switching. A fundamental challenge, however, is that finite electronic conductivity may introduce considerable power dissipation and perhaps destabilize ferroelectricity itself. In this work, tunable microwave frequency electronic response of domain walls injected into ferroelectric lead zirconate titanate (PbZr 0.2 Ti 0.8 O 3 ) on the level of a single nanodomain is revealed. Tunable microwave response is detected through first-order reversal curve spectroscopy combined with scanning microwave impedance microscopy measurements taken near 3 GHz. Contributions of film interfaces to the measured AC conduction through subtractive milling, where the film exhibited improved conduction properties after removal of surface layers, are investigated. Using statistical analysis and finite element modeling, we inferred that the mechanism of tunable microwave conductance is the variable area of the domain wall in the switching volume. These observations open the possibilities for ferroelectric memristors or volatile resistive switches, localized to several tens of nanometers and operating according to well-defined dynamics under an applied field.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Probing phonon softening in ferroelectrics by scanning probe microwave spectroscopy

Microwave measurements have recently been successfully applied to measure ferroelectric materials on the nanoscale, including detection of polarization switching and ferroelectric domain walls. In this study we discuss the question of whether scanning probe microscopy operating at microwave frequency can identify the changes associated with the soft phonon dynamics in a ferroic. The analytical expressions for the electric potential, complex impedance, and dielectric losses are derived and analyzed, since these physical quantities are linked to experimentally measurable properties of the ferroic. As a ferroic we consider virtual or proper ferroelectric with an optic phonon mode that softens at a Curie point. We also consider a decay mechanism linked to the conductance of the ferroic, thus manifesting itself as the dielectric loss in the material. Our key finding is that the influence of the soft phonon dispersion on the surface potential distribution, complex impedance, and dielectric losses are evidently strong in the vicinity (~10–30 K) of the Curie temperature. Additionally, we quantified how the spatial distribution and frequency spectra of the complex impedance and the dielectric losses react on the dynamics of the soft phonons near the Curie point. These results set the stage for characterization of polar phase transitions with nanoscale microwave measurements, providing a complementary approach to well established electromechanical measurements for fundamental understanding of ferroelectric properties as well as their applications in telecommunication and computing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Truncated nonlinear interferometer-based atomic force microscopes

A truncated non-linear interferometer-based atomic force microscope (AFM) includes an input port and a non-linear amplifier that renders a probe beam and a conjugate beam. The AFM includes local oscillators having a relationship with the probe beam and the conjugate beam. The displacement of the AFM's cantilever is transduced by the probe beam, and/or the conjugate beam or their respective local oscillators. The AFM's phase-sensitive detectors detect a phase modulation between the respective local oscillators and the probe beam and the conjugate beam. The detected phase modulation corresponds to the change in phase. The AFM's circuitry measures phase signals that are indicative of the cantilever displacement. The resulting measurement signals exhibit a quantum noise reduction in either the intensity difference or phase sum quadrature.

Pooser, Raphael C.↗
DOE OSTI2021

Stress-induced phase transitions in nanoscale CuInP 2 S 6

Using the Landau-Devonshire approach and available experimental results, we constructed multiwell thermodynamic potential of the layered ferroelectric CuInP 2 S 6 (CIPS). The analysis of temperature dependences of the dielectric permittivity and lattice constants for different applied pressures unexpectedly reveals the critically important role of a nonlinear electrostriction in this material. With the nonlinear electrostriction included we calculated the temperature and pressure phase diagrams and spontaneous polarization of a bulk CIPS, within the assumed range of applicable temperatures and applied pressures. Using the developed thermodynamic potential, we revealed the strain-induced phase transitions in thin epitaxial СIPS films, as well as the stress-induced phase transitions in СIPS nanoparticles, the shape of which varies from prolate needles to oblate disks. Furthermore, w also revealed the strong influence of a mismatch strain, elastic stress, and shape anisotropy on the phase diagrams and polar properties of a nanoscale CIPS, and derived analytical expressions allowing for elastic control of the nanoscale CIPS polar properties. Hence obtained results can be of particular interest for the strain engineering of nanoscale layered ferroelectrics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Engineering Tunneling Selector to Achieve High Non-linearity for 1S1R Integration

Memristor devices have been extensively studied as one of the most promising technologies for next-generation non-volatile memory. However, for the memristor devices to have a real technological impact, they must be densely packed in a large crossbar array (CBA) exceeding Gigabytes in size. Devising a selector device that is CMOS compatible, 3D stackable, and has a high non-linearity (NL) and great endurance is a crucial enabling ingredient to reach this goal. Tunneling based selectors are very promising in these aspects, but the mediocre NL value limits their applications in large passive crossbar arrays. In this work, we demonstrated a trilayer tunneling selector based on the Ge/Pt/TaN 1+x /Ta 2 O 5 /TaN 1+x /Pd layers that could achieve a NL of 3 × 10 5 , which is the highest NL achieved using a tunnel selector so far. The record-high tunneling NL is partially attributed to the bottom electrode's ultra-smoothness (BE) induced by a Ge/Pt layer. We further demonstrated the feasibility of 1S1R (1-selector 1-resistor) integration by vertically integrating a Pd/Ta 2 O 5 /Ru based memristor on top of the proposed selector.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Lowering of Tc in Van Der Waals Layered Materials Under In-Plane Strain

The dependence of electromechanical behavior on strain in ferroelectric materials can be leveraged as parameter to tune ferroelectric properties such as the Curie temperature. For van der Waals materials, a unique opportunity arises because of wrinkling, bubbling, and Moiré phenomena accessible due to structural properties inherent to the van der Waals gap. Here, we use piezoresponse force microscopy and unsupervised machine learning methods to gain insight into the ferroelectric properties of layered CuInP2S6 where local areas are strained in-plane due to a partial delamination, resulting in a topographic bubble feature. We observe significant differences between strained and unstrained areas in piezoresponse images as well as voltage spectroscopy, during which strained areas show a sigmoid-shaped response usually associated with the response measured around the Curie temperature, indicating a lowering of the Curie temperature under tensile strain. These results suggest that strain engineering might be used to further increase the functionality of CuInP2S6 through locally modifying ferroelectric properties on the micro- and nanoscale.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Phenomenological description of bright domain walls in ferroelectric-antiferroelectric layered chalcogenides

Recently, a layered ferroelectric CuIn P 2 Se 6 was shown to exhibit domain walls with locally enhanced piezoresponse—a striking departure from the observations of nominally zero piezoresponse in most ferroelectrics. Although it was proposed that such "bright" domain walls are phase boundaries between ferri- and antiferroelectrically ordered regions of the materials, the physical mechanisms behind the existence and response of these boundaries remain to be understood. Here, using Landau-Ginzburg-Devonshire phenomenology combined with a four sublattices model, we describe quantitatively the bright-contrast and dark-contrast domain boundaries between the antiferroelectric, ferroelectric, or ferrielectric long-range-ordered phases in a layered ferroelectric-antiferroelectric ferroics, such as CuIn P 2 (S 1-y Se y ) 6 .

36 MATERIALS SCIENCE↗
DOE OSTI2020

The Concept of Negative Capacitance in Ionically Conductive Van der Waals Ferroelectrics

Negative capacitance (NC) provides a path to overcome the Boltzmann limit that dictates operating voltages in transistors and, therefore, may open up a path to the challenging proposition of lowering energy consumption and waste heat in nanoelectronic integrated circuits. Typically, NC effects in ferroelectric materials are based on either stabilizing a zero-polarization state or slowing down ferroelectric switching in order to access NC regimes of the free-energy distribution. Here, a fundamentally different mechanism for NC, based on CuInP 2 S 6 , a van der Waals layered ferrielectric, is demonstrated. Using density functional theory and piezo-response force microscopy, it is shown that an unusual combination of high Cu-ion mobility and its crucial role in determining polarization magnitude and orientation (P) leads to a negative slope of the polarization versus the electric field E, dP/dE < 0, which is a requirement for NC. This mechanism for NC is likely to occur in a wide class of materials, offering new possibilities for NC-based devices. Finally, the nanoscale demonstration of this mechanism can be extended to the device-level by increasing the regions of homogeneous polarization and polarization switching, for example, through strain engineering and carefully selected electric field pulses.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Squeezing Noise in Microscopy with Quantum Light

Quantum-enhanced microscopes capable of probing classically inaccessible material properties have drawn increasing interest, but most proof-of-principle quantum microscopes have not surpassed classical limits. Here, we discuss the promise and obstacles associated with the use of quantum light with reduced noise (‘squeezed’ light) for quantum-enhanced atomic force microscopy, bioimaging, magneto-optical measurements, and Raman spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Local Strain and Polarization Mapping in Ferrielectric Materials

CuInP 2 S 6 (CIPS) is a van der Waals material that has attracted attention because of its unusual properties. Recently, a combination of density functional theory (DFT) calculations and piezoresponse force microscopy (PFM) showed that CIPS is a uniaxial quadruple-well ferrielectric featuring two polar phases and a total of four polarization states that can be controlled by external strain. In this study, we combine DFT and PFM to investigate the stress-dependent piezoelectric properties of CIPS, which have so far remained unexplored. The two different polarization phases are predicted to differ in their mechanical properties and the stress sensitivity of their piezoelectric constants. This knowledge is applied to the interpretation of ferroelectric domain images, which enables investigation of local strain and stress distributions. The interplay of theory and experiment produces polarization maps and layer spacings which we compare to macroscopic X-ray measurements. We found that the sample contains only the low-polarization phase and that domains of one polarization orientation are strained, whereas domains of the opposite polarization direction are fully relaxed. The described nanoscale imaging methodology is applicable to any material for which the relationship between electromechanical and mechanical characteristics is known, providing insight on structural, mechanical, and electromechanical properties down to ~10 nm length scales.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Piezoelectric domain walls in van der Waals antiferroelectric CuInP2Se6

Polar van der Waals chalcogenophosphates exhibit unique properties, such as negative electrostriction and multi-well ferrielectricity, and enable combining dielectric and 2D electronic materials. Using low temperature piezoresponse force microscopy, we revealed coexistence of piezoelectric and non-piezoelectric phases in CuInP2Se6, forming unusual domain walls with enhanced piezoelectric response. From systematic imaging experiments we have inferred the formation of a partially polarized antiferroelectric state, with inclusions of structurally distinct ferrielectric domains enclosed by the corresponding phase boundaries. The assignment is strongly supported by optical spectroscopies and density-functional-theory calculations. Enhanced piezoresponse at the ferrielectric/antiferroelectric phase boundary and the ability to manipulate this entity with electric field on the nanoscale expand the existing phenomenology of functional domain walls. At the same time, phase-coexistence in chalcogenophosphates may lead to rational strategies for incorporation of ferroic functionality into van der Waals heterostructures, with stronger resilience toward detrimental size-effects.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Alignment of Polarization against an Electric Field in van der Waals Ferroelectrics

Polarization in ferroelectrics can be switched in the direction of an applied electric field by dipole reorientation, enabling numerous applications and fundamental phenomena. In this study, we demonstrate that, in the van der Waals (vdW) layered ferrielectric Cu In P 2 S 6 , a unique mechanism exists where polarization aligns against the direction of the applied electric field, seemingly in violation of the fundamental properties of a dipolar solid. The mechanism is the result of the electric field driving the Cu atoms unidirectionally across the vdW gaps, which is distinctively different from dipole reorientation. The crossing of Cu atoms is the fundamental process of ionic conductivity, yet it is compatible with the existence of polarization. These phenomena are confirmed by nanoscale imaging and spectroscopy of ferroelectric capacitors, coupled with dynamic density-functional-theory simulations. The symbiotic relationship of ferroelectric and ionic phenomena enables alternative approaches to control polarization and necessitates a change in perspective on nucleation, domain-wall dynamics, and other ferroelectric and electromechanical characteristics in material systems where ionic and ferroelectric phenomena manifest.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗