Search NASA⌕ Search

Engineering topics

Malila, W. A.

Publications and source records attributed to Malila, W. A..

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Design, implementation, and results of LACIE field research

The capability to acquire, process, and interpret remotely sensed multispectral measurements of the energy reflected and emitted from crops, soils, and other Earth surface features is considered. The LACIE Field Measurements Project is described including project objectives, the experimental approach, the data acquisition program, and selected results based on field data. The key accomplishments and results of the experiment and recommendations for future field research are summarized.

Bauer, M. E.↗
NASA NTRS1979

Large Area Crop Inventory Experiment (LACIE). Development of procedure M for multicrop inventory, with tests of a spring-wheat configuration

The author has identified the following significant results. An outgrowth of research and development activities in support of LACIE was a multicrop area estimation procedure, Procedure M. This procedure was a flexible, modular system that could be operated within the LACIE framework. Its distinctive features were refined preprocessing (including spatially varying correction for atmospheric haze), definition of field like spatial features for labeling, spectral stratification, and unbiased selection of samples to label and crop area estimation without conventional maximum likelihood classification.

Horvath, R.↗
NASA NTRS1978

Applications of modeling to analysis and processing of Landsat data

The Suits bidirectional reflectance model (1972) for vegetation canopies was used to calculate reflectance values for the four Landsat spectral bands under a variety of canopy and observation conditions. Relationships between characteristics of developing wheat fields and associated reflectances were studied. Coincident measurements of crop reflectance and Landsat signals were compared using regression analysis techniques. The model was also applied to forest situations both to help establish the extent to which Landsat may provide direct information about conditions occurring beneath forest overstories and to help develop methods for reducing the effects of terrain slope and aspect in the processing of Landsat data. Finally, a relationship based on model calculations was used to adjust Landsat signal values and was found to reduce topography-related variability and improve subsequent classification performance.

Malila, W. A.↗
NASA NTRS1977

Investigations of spectral separability of small grains, early season wheat detection, and multicrop inventory planning

The author has identified the following significant results. LANDSAT data from seven 5 by 6 segments having crop type information were analyzed to determine the potential for spectral separation of spring wheat from other small grains as an alternative to the primary LACIE procedure for estimating spring wheat acreage. Within segment field-center, classification accuracies for spring wheat vs. barley tended to be best in mid-July when crop color changes were in progress. When correlations were made for differences in atmospheric haze, data from several segments could be aggregated, and results that approached within segment accuracies were obtained for selected dates. LACIE field measurement spectral reflectance data provided information on both wheat development patterns and the importance of various agronomic factors on wheat reflectance, the most important being availability of soil moisture. To investigate early season detection for winter wheat, reflectance of developing wheat patterns was simulated through reflectance modeling and was analyzed along with field measured reflectance from a Kansas site. The green component development of the wheat field was analyzed as a function of data throughout the season. A selected threshold was not crossed by all fields until mid-April. These reflectance data were shown to be consistent actual LANDSAT data.

Nalepka, R. F.↗
NASA NTRS1977

Investigation of Techniques for Inventorying Forested Regions. Volume 1: Reflectance Modeling and Empirical Multispectral Analysis of Forest Canopy Components

The author has identified the following significant results. Effects of vegetation density on overall canopy reflectance differed dramatically, depending on spectral band, base material, and vegetation type. For example, reflectance changes caused by variations in vegetation density were hardly apparant for a simulated burned surface in LANDSAT band 5, while large changes occurred in band 7. When increasing densities of tree overstory were placed over understories, intermediate to dense overstories effectively masked the understories and dominated the spectral signatures. Dramatic changes in reflectance occurred for canopies placed on a number of varying topographic positions. Such changes were seen to result in the spectral overlap of some nonforested with densely forested situations.

Nalepka, R. F.↗
NASA NTRS1977

Investigation of techniques for inventorying forested regions. Volume 2: Forestry information system requirements and joint use of remotely sensed and ancillary data

The author has identified the following significant results. Effects of terrain topography in mountainous forested regions on LANDSAT signals and classifier training were found to be significant. The aspect of sloping terrain relative to the sun's azimuth was the major cause of variability. A relative insolation factor could be defined which, in a single variable, represents the joint effects of slope and aspect and solar geometry on irradiance. Forest canopy reflectances were bound, both through simulation, and empirically, to have nondiffuse reflectance characteristics. Training procedures could be improved by stratifying in the space of ancillary variables and training in each stratum. Application of the Tasselled-Cap transformation for LANDSAT data acquired over forested terrain could provide a viable technique for data compression and convenient physical interpretations.

Nalepka, R. F.↗
NASA NTRS1977

The influence of multispectral scanner spatial resolution on forest feature classification

Inappropriate spatial resolution and corresponding data processing techniques may be major causes for non-optimal forest classification results frequently achieved from multispectral scanner (MSS) data. Procedures and results of empirical investigations are studied to determine the influence of MSS spatial resolution on the classification of forest features into levels of detail or hierarchies of information that might be appropriate for nationwide forest surveys and detailed in-place inventories. Two somewhat different, but related studies are presented. The first consisted of establishing classification accuracies for several hierarchies of features as spatial resolution was progressively coarsened from (2 meters) squared to (64 meters) squared. The second investigated the capabilities for specialized processing techniques to improve upon the results of conventional processing procedures for both coarse and fine resolution data.

Sadowski, F. G.↗
NASA NTRS1977

Multispectral system analysis through modeling and simulation

The design and development of multispectral remote sensor systems and associated information extraction techniques should be optimized under the physical and economic constraints encountered and yet be effective over a wide range of scene and environmental conditions. Direct measurement of the full range of conditions to be encountered can be difficult, time consuming, and costly. Simulation of multispectral data by modeling scene, atmosphere, sensor, and data classifier characteristics is set forth as a viable alternative, particularly when coupled with limited sets of empirical measurements. A multispectral system modeling capability is described. Use of the model is illustrated for several applications - interpretation of remotely sensed data from agricultural and forest scenes, evaluating atmospheric effects in LANDSAT data, examining system design and operational configuration, and development of information extraction techniques.

Malila, W. A.↗
NASA NTRS1977

Multispectral system analysis through modeling and simulation

The design and development of multispectral remote sensor systems and associated information extraction techniques should be optimized under the physical and economic constraints encountered and yet be effective over a wide range of scene and environmental conditions. Direct measurement of the full range of conditions to be encountered can be difficult, time consuming, and costly. Simulation of multispectral data by modeling scene, atmosphere, sensor, and data classifier characteristics is set forth as a viable alternative, particularly when coupled with limited sets of empirical measurements. A multispectral system modeling capability is described. Use of the model is illustrated for several applications - interpretation of remotely sensed data from agricultural and forest scenes, evaluating atmospheric effects in Landsat data, examining system design and operational configuration, and development of information extraction techniques.

Malila, W. A.↗
NASA NTRS1976

Wheat signature modeling and analysis for improved training statistics: Supplement. Simulated LANDSAT wheat radiances and radiance components

Simulated scanner system data values generated in support of LACIE (Large Area Crop Inventory Experiment) research and development efforts are presented. Synthetic inband (LANDSAT) wheat radiances and radiance components were computed and are presented for various wheat canopy and atmospheric conditions and scanner view geometries. Values include: (1) inband bidirectional reflectances for seven stages of wheat crop growth; (2) inband atmospheric features; and (3) inband radiances corresponding to the various combinations of wheat canopy and atmospheric conditions. Analyses of these data values are presented in the main report.

Malila, W. A.↗
NASA NTRS1976

Investigation of spatial misregistration effects in multispectral scanner data

The author has identified the following significant results. A model for estimating the expected proportion of multiclass pixels in a scene was generalized and extended to include misregistration effects. Another substantial effort was the development of a simulation model to generate signatures to represent the distributions of signals from misregistered multiclass pixels, based on single class signatures. Spatial misregistration causes an increase in the proportion of multiclass pixels in a scene and a decorrelation between signals in misregistered data channels. The multiclass pixel proportion estimation model indicated that this proportion is strongly dependent on the pixel perimeter and on the ratio of the total perimeter of the fields in the scene to the area of the scene. Test results indicated that expected values computed with this model were similar to empirical measurements made of this proportion in four LACIE data segments.

Nalepka, R. F.↗