Control over Catenation in Metal-Organic Frameworks via Rational Design of the Organic Building Block
Abstract not provided
Engineering topics
Publications and source records attributed to Malliakas, Christos D.
Abstract not provided
A facile and general methodology for the development of metal–organic frameworks (MOFs) functionalized with pendant, aromatic hydroxyl (-OH) groups is presented. Extensive gas-sorption studies in representative and important MOFs functionalized with free aromatic -OH groups such as the IRMOF-8 and DUT-6 (or MOF-205), denoted here as 1 and 2, revealed a high CO 2 /CH 4 selectivity for 1 (13.6 at 273 K and 1 bar) and a high NH 3 uptake of 16.4 mol kg –1 at 298 K and 1 bar for 2.
A series of novel rock-salt-type Pb m Sb 2n Te m+3n nanocrystals (m = 2, 3, 4, 6, 8, and 10; n = 1 and 2) were successfully prepared using a colloidal synthesis route. These materials are stable only on the nanoscale and have no bulk analogues. Elemental compositions were determined using scanning transmission electron microscopy/energy-dispersive X-ray spectroscopy (STEM/EDS) and inductively coupled plasma atomic emission spectroscopy (ICP-AES). The nanocrystals exhibit well-defined band energies in the mid-IR region that are nearly independent of their atomic compositions. Pb m Sb 2n Te m+3n nanocrystals behave as metastable homogeneous solid solutions at room temperature and tend to phase separate into the respective binary PbTe + Sb 2 Te 3 at 300 °C. Furthermore, pair distribution function (PDF) analysis suggests that the local structure of these Pb m Sb 2n Te m+3n nanocrystals is distorted with respect to the rock-salt structure.
CsSnI{sub 3} is an unusual perovskite that undergoes complex displacive and reconstructive phase transitions and exhibits near-infrared emission at room temperature. Experimental and theoretical studies of CsSnI{sub 3} have been limited by the lack of detailed crystal structure characterization and chemical instability. Here we describe the synthesis of pure polymorphic crystals, the preparation of large crack-/bubble-free ingots, the refined single-crystal structures, and temperature-dependent charge transport and optical properties of CsSnI{sub 3}, coupled with ab initio first-principles density functional theory (DFT) calculations. In situ temperature-dependent single-crystal and synchrotron powder X-ray diffraction studies reveal the origin of polymorphous phase transitions of CsSnI{sub 3}. The black orthorhombic form of CsSnI{sub 3} demonstrates one of the largest volumetric thermal expansion coefficients for inorganic solids. Electrical conductivity, Hall effect, and thermopower measurements on it show p-type metallic behavior with low carrier density, despite the optical band gap of 1.3 eV. Hall effect measurements of the black orthorhombic perovskite phase of CsSnI{sub 3} indicate that it is a p-type direct band gap semiconductor with carrier concentration at room temperature of {approx} 10{sup 17} cm{sup -3} and a hole mobility of {approx} 585 cm{sup 2} V{sup -1} s{sup -1}. The hole mobility is one of the highest observed among p-type semiconductors with comparable band gaps. Its powders exhibit a strong room-temperature near-IR emission spectrum at 950 nm. Remarkably, the values of the electrical conductivity and photoluminescence intensity increase with heat treatment. The DFT calculations show that the screened-exchange local density approximation-derived band gap agrees well with the experimentally measured band gap. Calculations of the formation energy of defects strongly suggest that the electrical and light emission properties possibly result from Sn defects in the crystal structure, which arise intrinsically. Thus, although stoichiometric CsSnI{sub 3} is a semiconductor, the material is prone to intrinsic defects associated with Sn vacancies. This creates highly mobile holes which cause the materials to appear metallic.
N/A
We demonstrate the synthesis of semiconductor Pb 2-x Sn x S 2 nanocrystals with a cubic rock salt crystal structure in a composition range where this structure is unstable in the bulk. The cubic Pb 2-x Sn x S 2 nanocrystals were prepared using a modified hot injection colloidal synthetic route. The x value is in the range 0.40 < x < 1. Even though these compositions lie in a region of the PbS-SnS phase diagram where no single phase exists, and despite the fact that PbSnS 2 is a distorted orthorhombic phase, the Pb 2-x Sn x S 2 nanocrystals are single phase solid solutions with cubic NaCl-type structure. Experimental evidence for this derives from powder X-ray diffraction (PXRD), electron diffraction, and pair distribution function (PDF) analysis. Elemental compositions determined using scanning transmission electron microscopy/energy dispersive spectroscopy (STEM/EDS), inductively coupled plasma-atomic emission spectroscopy (ICP-AES), and electron energy loss spectroscopy (EELS) reveal a composition close to the nominal ones. The band gaps of the Pb 2-x Sn x S 2 nanocrystals (0.52-0.57 eV) are blue-shifted by quantum confinement relative to that of the hypothetical cubic PbSnS2 phase which density functional theory (DFT) calculations show to be much narrower (0.2 eV) than in the case of orthorhombic PbSnS 2 (1.1 eV). The Pb 2-x Sn x S 2 nanocrystals exhibit a well-defined band gap in the near-IR region and are stable up to 300 °C above which they phase separate into cubic PbS and orthorhombic α-SnS.
Yb{sub 3}Ga{sub 7}Ge{sub 3} and YbGa{sub 4}Ge{sub 2} were obtained from reactions of Yb and Ge in excess liquid gallium. The crystal structure of Yb{sub 3}Ga{sub 7}Ge{sub 3} was refined using X-ray and neutron diffraction data on selected single crystals. Yb{sub 3}Ga{sub 7}Ge{sub 3} crystallizes in the monoclinic space group C2/c with lattice constants a=12.2261(20) Angstrom-Sign , b=10.7447(20) Angstrom-Sign , c=8.4754(17) Angstrom-Sign and {beta}=110.288(30) Degree-Sign (neutron diffraction data). The crystal structure of Yb{sub 3}Ga{sub 7}Ge{sub 3} is an intergrowth of planar layers of YbGa{sub x}Ge{sub y} and puckered layers of (Ge){sub n}. YbGa{sub 4}Ge{sub 2} crystallizes in a modified PuGa{sub 6} structure type in the tetragonal polar space group I4cm with lattice constants a=b=5.9874(6) Angstrom-Sign and c=15.1178(19) Angstrom-Sign . The structure of YbGa{sub 4}Ge{sub 2} is an intergrowth of puckered Ga layers and puckered Ga{sub x}Ge{sub y} layers with Yb atoms residing within the channels formed by the connection of the two layers. Physical properties, resistivity ({rho}), magnetic susceptibility ({chi}) and specific heat (C) were measured for Yb{sub 3}Ga{sub 7}Ge{sub 3}. No magnetic ordering was observed. It was found that at low temperatures, {rho} varied as T{sup 2} and C{proportional_to}T, indicating Fermi-liquid regime in Yb{sub 3}Ga{sub 7}Ge{sub 3} at low temperatures. - Graphical abstract: The compounds Yb{sub 3}Ga{sub 7}Ge{sub 3} and YbGa{sub 4}Ge{sub 2} are obtained from reactions of Yb and Ge in excess liquid gallium. Highlights: Black-Right-Pointing-Pointer Yb{sub 3}Ga{sub 7}Ge{sub 3} and YbGa{sub 4}Ge{sub 2} are two new polygallides. Black-Right-Pointing-Pointer The crystal structure of Yb{sub 3}Ga{sub 7}Ge{sub 3} was established using neutron diffraction data. Black-Right-Pointing-Pointer YbGa{sub 4}Ge{sub 2} is one of the rare polar intermetallic compounds. Black-Right-Pointing-Pointer The physical properties of Yb{sub 3}Ga{sub 7}Ge{sub 3} point to a Fermi-liquid regime at low temperature.
Abstract not provided
Technetium dichloride has been discovered. It was synthesized from the elements and characterized by several physical techniques, including single crystal X-ray diffraction. In the solid state, technetium dichloride exhibits a new structure type consisting of infinite chains of face sharing [Tc{sub 2}Cl{sub 8}] rectangular prisms that are packed in a commensurate supercell. The metal-metal separation in the prisms is 2.127(2) {angstrom}, a distance consistent with the presence of a Tc {triple_bond} Tc triple bond that is also supported by electronic structure calculations.
We report that the one-dimensional polar selenophosphate compounds APSe{sub 6} (A = K, Rb), which show crystal-glass phase-change behavior, exhibit strong second harmonic generation (SHG) response in both crystal and glassy forms. The crystalline materials are type-I phase-matchable with SHG coefficients {chi}{sup (2)} of 151.3 and 149.4 pm V{sup -1} for K{sup +} and Rb{sup +} salts, respectively, which is the highest among phase-matchable nonlinear optical (NLO) materials with band gaps over 1.0 eV. The glass of APSe{sub 6} exhibits comparable SHG intensities to the top infrared NLO material AgGaSe{sub 2} without any poling treatments. APSe{sub 6} exhibit excellent mid-IR transparency. We demonstrate that starting from noncentrosymmetric phase-change materials such as APSe{sub 6} (A = K, Rb), we can obtain optical glass fibers with strong, intrinsic, and temporally stable second-order nonlinear optical (NLO) response. The as-prepared glass fibers exhibit SHG and difference frequency generation (DFG) responses over a wide range of wavelengths. Raman spectroscopy and pair distribution function (PDF) analyses provide further understanding of the local structure in amorphous state of KPSe{sub 6} bulk glass and glass fiber. We propose that this approach can be widely applied to prepare permanent NLO glass from materials that undergo a phase-change process.
We report the formation of novel open framework lanthanide (La, Ce, Pr and Dy) MOFs using the ligand 4,4{prime}-bibenzoic acid-2,2{prime}-sulfone. In the case of Ce and Pr, an unprecedented single-crystal-to-single-crystal transformation at room temperature was discovered.
We describe the inorganic polymer K{sub 4}P{sub 8}Te{sub 4} which is soluble, giving solutions that exhibit white emission upon 355 nm laser irradiation. An indirect band gap semiconductor (E{sub g} {approx} 1.4 eV), K{sub 4}P{sub 8}Te{sub 4} crystallizes in the space group P2{sub 1}/m, with a = 6.946(1) {angstrom}, b = 6.555(1) {angstrom}, c = 9.955(2) {angstrom}, and {beta} = 90.420(3){sup o} at 173(2) K. The compound features infinite chains of [P{sub 8}Te{sub 4}{sup 4-}] with covalent P-Te bonding and exhibits reversible crystal-glass phase-change behavior. When deposited from solution, the material forms highly crystalline K{sub 4}P{sub 8}Te{sub 4} nanospheres. The thermal analysis, FT-IR, UV-vis diffuse reflectance, {sup 31}P magic angle spinning solid-state NMR spectroscopy, and pair distribution function (PDF) analysis for the crystal and glass forms and ab initio electronic structure calculations by the screened-exchange local density function approximation are also reported. Speciation of K{sub 4}P{sub 8}Te{sub 4} in solution studied with {sup 31}P solution-state NMR spectroscopy, electrospray ionization mass spectrometry, and PDF analysis indicate exfoliation of [P{sub 8}Te{sub 4}{sup 4-}] chains followed by rearrangement into molecular species.
We present the synthesis and characterization of a novel metal-organic molecular solid using the ligand 4,8-disulfonaphthalene-2,6-dicarboxylic acid. The solid features a sulfonated, isolated supertetrahedra, [Fe{sub 16}O{sub 4}(SO{sub 4}){sub 12}(L2){sub 6}], built from mixed-valence [Fe{sub 3}{sup 3+}Fe{sup 2+}({mu}{sub 3}-O)({mu}{sub 3}-SO{sub 4}){sub 3}(-CO{sub 2}){sub 3}] clusters.
A noncatenated, Zn-based metal-organic framework (MOF) material bearing silyl-protected acetylenes was constructed and postsynthetically modified using 'click' chemistry. Using a solvent-based, selective deprotection strategy, two different organic azides were 'clicked' onto the MOF crystals, resulting in a porous material whose internal and external surfaces are differently functionalized.