Engineering topics

Marchetto, Carl A.

Publications and source records attributed to Marchetto, Carl A..

4 records

NASA NTRS1992

Eliminating Deadbands In Resistive Angle Sensors

Proposed shaft-angle-measuring circuit provides continuous indication of angle of rotation from 0 degree to 360 degrees. Sensing elements are two continuous-rotation potentiometers, and associated circuitry eliminates deadband that occurs when wiper contact of potentiometer crosses end contacts near 0 degree position of circular resistive element. Used in valve-position indicator or similar device in which long operating life and high angular precision not required.

Salomon, Phil M.↗

NASA NTRS1989

Dynamic Torque Calibration Unit

Proposed dynamic torque calibration unit (DTCU) measures torque in rotary actuator components such as motors, bearings, gear trains, and flex couplings. Unique because designed specifically for testing components under low rates. Measures torque in device under test during controlled steady rotation or oscillation. Rotor oriented vertically, supported by upper angular-contact bearing and lower radial-contact bearing that floats axially to prevent thermal expansion from loading bearings. High-load capacity air bearing available to replace ball bearings when higher load capacity or reduction in rate noise required.

Agronin, Michael L.↗

NASA NTRS1988

Angular-Momentum-Compensating Servomechanism

Servomechanism for rotating an instrumentation platform isolates supporting vehicle or stationary platform from reaction torques producedby rotations. Prevents aiming of instrument from disturbing vehicle or other instrument platforms. Rotating oppositely to instrument platform, reaction wheel, motor, and gear 1 have angular momentum equal and opposite to gear 2, output shaft, and platform. External torque reaction to rotation of platform canceled. Although spur gears appear in schematic diagram, gear train made of spline gears.

Marchetto, Carl A.↗

NASA NTRS1988

Equations For Rotary Transformers

Equations derived for input impedance, input power, and ratio of secondary current to primary current of rotary transformer. Used for quick analysis of transformer designs. Circuit model commonly used in textbooks on theory of ac circuits.

Salomon, Phil M.↗