Engineering topics

Marhefka, R. J.

Publications and source records attributed to Marhefka, R. J..

At least 19 records

NASA NTRS1994

A uniform geometrical optics and an extended uniform geometrical theory of diffraction for evaluating high frequency EM fields near smooth caustics and composite shadow boundaries

A uniform geometrical optics (UGO) and an extended uniform geometrical theory of diffraction (EUTD) are developed for evaluating high frequency electromagnetic (EM) fields within transition regions associated with a two and three dimensional smooth caustic of reflected rays and a composite shadow boundary formed by the caustic termination or the confluence of the caustic with the reflection shadow boundary (RSB). The UGO is a uniform version of the classic geometrical optics (GO). It retains the simple ray optical expressions of classic GO and employs a new set of uniform reflection coefficients. The UGO also includes a uniform version of the complex GO ray field that exists on the dark side of the smooth caustic. The EUTD is an extension of the classic uniform geometrical theory of diffraction (UTD) and accounts for the non-ray optical behavior of the UGO reflected field near caustics by using a two-variable transition function in the expressions for the edge diffraction coefficients. It also uniformly recovers the classic UTD behavior of the edge diffracted field outside the composite shadow boundary transition region. The approach employed for constructing the UGO/EUTD solution is based on a spatial domain physical optics (PO) radiation integral representation for the fields which is then reduced using uniform asymptotic procedures. The UGO/EUTD analysis is also employed to investigate the far-zone RCS problem of plane wave scattering from two and three dimensional polynomial defined surfaces, and uniform reflection, zero-curvature, and edge diffraction coefficients are derived. Numerical results for the scattering and diffraction from cubic and fourth order polynomial strips are also shown and the UGO/EUTD solution is validated by comparison to an independent moment method (MM) solution. The UGO/EUTD solution is also compared with the classic GO/UTD solution. The failure of the classic techniques near caustics and composite shadow boundaries is clearly demonstrated and it is shown that the UGO/EUTD results remain valid and uniformly reduce to the classic results away from the transition regions. Mathematical details on the asymptotic properties and efficient numerical evaluation of the canonical functions involved in the UGO/EUTD expressions are also provided.

Constantinides, E. D.↗

NASA NTRS1993

Efficient and accurate computation of the incomplete Airy functions

The incomplete Airy integrals serve as canonical functions for the uniform ray optical solutions to several high-frequency scattering and diffraction problems that involve a class of integrals characterized by two stationary points that are arbitrarily close to one another or to an integration endpoint. Integrals with such analytical properties describe transition region phenomena associated with composite shadow boundaries. An efficient and accurate method for computing the incomplete Airy functions would make the solutions to such problems useful for engineering purposes. In this paper a convergent series solution for the incomplete Airy functions is derived. Asymptotic expansions involving several terms are also developed and serve as large argument approximations. The combination of the series solution with the asymptotic formulae provides for an efficient and accurate computation of the incomplete Airy functions. Validation of accuracy is accomplished using direct numerical integration data.

Constantinides, E. D.↗

NASA NTRS1993

An extended UTD analysis for the scattering and diffraction from cubic polynomial strips

Spline and polynomial type surfaces are commonly used in high frequency modeling of complex structures such as aircraft, ships, reflectors, etc. It is therefore of interest to develop an efficient and accurate solution to describe the scattered fields from such surfaces. An extended Uniform Geometrical Theory of Diffraction (UTD) solution for the scattering and diffraction from perfectly conducting cubic polynomial strips is derived and involves the incomplete Airy integrals as canonical functions. This new solution is universal in nature and can be used to effectively describe the scattered fields from flat, strictly concave or convex, and concave convex boundaries containing edges. The classic UTD solution fails to describe the more complicated field behavior associated with higher order phase catastrophes and therefore a new set of uniform reflection and first-order edge diffraction coefficients is derived. Also, an additional diffraction coefficient associated with a zero-curvature (inflection) point is presented. Higher order effects such as double edge diffraction, creeping waves, and whispering gallery modes are not examined. The extended UTD solution is independent of the scatterer size and also provides useful physical insight into the various scattering and diffraction processes. Its accuracy is confirmed via comparison with some reference moment method results.

Constantinides, E. D.↗

NASA NTRS1992

Numerical evaluation of the incomplete airy functions and their application to high frequency scattering and diffraction

The incomplete Airy integrals serve as canonical functions for the uniform ray optical solutions to several high frequency scattering and diffraction problems that involve a class of integrals characterized by two stationary points that are arbitrarily close to one another or to an integration endpoint. Integrals of such analytical properties describe transition region phenomena associated with composite shadow boundaries. An efficient and accurate method for computing the incomplete Airy functions would make the solutions to such problems useful for engineering purposes. Here, a convergent series solution form for the incomplete Airy functions is derived. Asymptotic expansions involving several terms were also developed and serve as large argument approximations. The combination of the series solution form with the asymptotic formulae provides for an efficient and accurate computation of the incomplete Airy functions. Validation of accuracy is accomplished using direct numerical integration data.

Constantinides, E. D.↗

NASA NTRS1991

SATCOM antenna siting study on P-3C aircraft, volume 1

The NEC-BSC (Basic Scattering Code) was used to study the performance of a SATCOM antenna on a P-3C aircraft. After plate cylinder fields are added to version 3.1 of the NEC-BSC, it is shown that the NEC-BSC can be used to accurately predict the performance of a SATCOM antenna system on a P-3C aircraft. The study illustrates that the NEC-BSC gives good results when compared with scale model measurements provided by Boeing and Lockheed.

Bensman, D. A.↗

NASA NTRS1991

SATCOM antenna siting study on P-3C aircraft, volume 2

This volume contains an antenna location study for the P-3C aircraft. From this location study, a determination can be made of the complete antenna system required to achieve the desired pattern and polarization coverage. The antenna used is the same Batwing airborne UHF satellite communications antenna use in volume 1. The aircraft model used in the majority of the locations studied is the simple cylindrical aircraft model defined in volume 1.

Bensman, D. A.↗

NASA NTRS1990

SATCOM antenna siting study on a P-3C using the NEC-BSC V3.1

The location of a UHF SATCOM antenna on a P-3C aircraft is studied using the NEC-Basic Scattering Code V3.1 (NEC-BSC3). The NEC-BSC3 is a computer code based on the uniform theory of diffraction. The code is first validated for this application using scale model measurements. In general, the comparisons are good except in 10 degree regions near the nose and tail of the aircraft. Patterns for various antenna locations are analyzed to achieve a prescripted performance.

Bensman, D.↗

NASA NTRS1989

Near Zone: Basic scattering code user's manual with space station applications

The Electromagnetic Code - Basic Scattering Code, Version 3, is a user oriented computer code to analyze near and far zone patterns of antennas in the presence of scattering structures, to provide coupling between antennas in a complex environment, and to determine radiation hazard calculations at UHF and above. The analysis is based on uniform asymptotic techniques formulated in terms of the Uniform Geometrical Theory of Diffraction (UTD). Complicated structures can be simulated by arbitrarily oriented flat plates and an infinite ground plane that can be perfectly conducting or dielectric. Also, perfectly conducting finite elliptic cylinder, elliptic cone frustum sections, and finite composite ellipsoids can be used to model the superstructure of a ship, the body of a truck, and airplane, a satellite, etc. This manual gives special consideration to space station modeling applications. This is a user manual designed to give an overall view of the operation of the computer code, to instruct a user in how to model structures, and to show the validity of the code by comparing various computed results against measured and alternative calculations such as method of moments whenever available.

Marhefka, R. J.↗

NASA NTRS1989

Target signature modeling and bistatic scattering measurement studies

Four areas of study are summarized: bistatic scattering measurements studies for a compact range; target signature modeling for test and evaluation hardware in the loop situation; aircraft code modification study; and SATCOM antenna studies on aircraft.

Burnside, W. D.↗

NASA NTRS1989

Target signature modeling and bistatic scattering measurement studies

An annual report that summarizes the work done on Grant No. NAG2-542 is presented. There are four areas of study to be summarized: (1) bistatic scattering measurement studies for a compact range; (2) target signature modeling for test and evaluation hardware in the loop situations; (3) aircraft code modification study; and (4) SATCOM antenna studies on aircraft.

Burnside, W. D.↗

NASA NTRS1986

Bistatic scattering from a cone frustum

The bistatic scattering from a perfectly conducting cone frustum is investigated using the Geometrical Theory of Diffraction (GTD). The first-order GTD edge-diffraction solution has been extended by correcting for its failure in the specular region off the curved surface and in the rim-caustic regions of the endcaps. The corrections are accomplished by the use of transition functions which are developed and introduced into the diffraction coefficients. Theoretical results are verified in the principal plane by comparison with the moment method solution and experimental measurements. The resulting solution for the scattered fields is accurate, easy to apply, and fast to compute.

Ebihara, W.↗

NASA NTRS1986

Manual for obscuration code with space station applications

The Obscuration Code, referred to as SHADOW, is a user-oriented computer code to determine the case shadow of an antenna in a complex environment onto the far zone sphere. The surrounding structure can be composed of multiple composite cone frustums and multiply sided flat plates. These structural pieces are ideal for modeling space station configurations. The means of describing the geometry input is compatible with the NEC-BASIC Scattering Code. In addition, an interactive mode of operation has been provided for DEC VAX computers. The first part of this document is a user's manual designed to give a description of the method used to obtain the shadow map, to provide an overall view of the operation of the computer code, to instruct a user in how to model structures, and to give examples of inputs and outputs. The second part is a code manual that details how to set up the interactive and non-interactive modes of the code and provides a listing and brief description of each of the subroutines.

Marhefka, R. J.↗

NASA NTRS1980

Summary of GTD computer codes developed at the Ohio State University

This paper briefly describes three user-oriented computer codes developed at the Ohio State University ElectroScience Laboratory: namely, the On-Aircraft Antenna Code, the Basic Scattering Code, and the Reflector Antenna Code. Each code uses the Geometrical Theory of Diffraction (GTD). An example is used to describe the basic GTD approach for all three codes. A brief description is given for each code which includes sample results compared to measurements.

Burnside, W. D.↗

NASA NTRS1976

Analysis of aircraft wing-mounted antenna patterns

High frequency radiation patterns of aircraft wing mounted antennas are analyzed. Basic antenna types using ray optical techniques are studied. The aircraft is modelled in its most basic form so that this study is applicable to general type aircraft. The fuselage is modelled as a perfectly conducting finite elliptic cylinder. The wings and horizontal and vertical stabilizers are modelled as perfectly conducting "n" sided flat plates that can be arbitrarily attached to the fuselage or to themselves. The antenna locations are assumed to be on the surfaces of the wings at locations removed from engines and stores such that these effects are negligible. Volumetric patterns are calculated for several aircraft. The validity of the solution is shown by comparing the results against scale model measurements. The application of this solution to practical airborne antenna problems has shown its versatility in designing antennas and predicting their radiation patterns in an accurate and efficient manner.

Marhefka, R. J.↗

NASA NTRS1975

A study of KC-135 aircraft antenna patterns

Numerical solutions for the radiation patterns of aircraft antennas provide and excellent means of designing and locating antennas in order to achieve the desired performance. The high frequency solutions presented in this paper are based on fuselage antennas mounted on a general-type aircraft but applied specifically to the KC-135 aircraft. The roll and elevation plane patterns are computed for a monopole, axial slot, and circumferential slot mounted both over and forward of the wings. In each case the calculated patterns compare very favorably with the measured patterns. The precision pattern measurements were taken on a 1/25 scale model of the KC-135 aircraft at NASA (Hampton, Va.) with special emphasis on reducing the mount and background effects.

Burnside, W. D.↗

NASA NTRS1974

Flush-mounted antennas radiating on aircraft type surfaces

The roll plane radiation patterns of on-aircraft antennas are analyzed using high frequency solutions. This is a basic study of aircraft-antenna pattern performance in which the aircraft is modelled in its most basic form. The fuselage is assumed to be a perfectly conducting elliptic cylinder with the antennas mounted near the top or bottom. The wings are simulated by arbitrarily many sided flat plates.

Burnside, W. D.↗

NASA NTRS1974

Roll plane analysis of on-aircraft antennas

Burnside, W. D.↗

NASA NTRS1974

A study of KC-135 aircraft antenna patterns

Numerical solutions for the radiation patterns of aircraft antennas are evaluated. Designing and locating antennas in order to achieve the desired performance is discussed. The high frequency solutions presented in this report are based on fuselage antennas mounted on a general-type aircraft but applied specifically to the KC-135 aircraft. The roll and elevation plane patterns are computed for a monopole, axial slot, and circumferential slot mounted both over and forward of the wings. In each case the calculated patterns compare very favorably with the measured patterns. The precision pattern measurements were taken on a 1/25 scale model of the KC-135 aircraft at NASA (Langley, Virginia) with special emphasis on reducing the mount and background effects.

Burnside, W. D.↗