Search NASA⌕ Search

Engineering topics

Maria Consiglio

Publications and source records attributed to Maria Consiglio.

15 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

An Improved Far-Field Small Unmanned Aerial System Optical Detection Algorithm

Onboard far-field aircraft detection is needed for safe non-cooperative traffic mitigation for autonomous small Unmanned Aerial System (sUAS) operations. This work presents an aircraft detect and track pipeline that fuses image differencing and morphological filtering detections for inputs to a Kalman-based object tracking pipeline. The pipeline is evaluated using two types of flight encounters: 1) motorcopter sUAS vs. fixed-wing sUAS 2) motorcopter sUAS vs general aviation plane.

Chester Dolph↗
NASA NTRSDate not supplied

Demonstration of Two Extended Visual Line of Sight Methods for Urban UAV Operations

This report describes two extended visual line of sight (EVLOS) methods developed and utilized during two flight campaigns over the campus of NASA Langley Research Center (LaRC): a chase vehicle method and a radio controlled (RC) pilot handoff method. These campaigns were performed to (a) evaluate small unmanned aerial system (sUAS) flight beyond the visual line of sight (BVLOS) of the ground control station operator and (b) test technologies under development to enable a transition from EVLOS to BVLOS operations. While an autonomous waypoint-based operational approach enabled minimal pilot intervention in both methods, range containment was enforced (a) manually via continual pilot visual monitoring and (b) autonomously via on-board contingency landing autonomy triggerable at the boundary of stay-in geofences. In the thirty-nine flights which utilized the chase vehicle, the pilot followed the sUAS flying a 1.2 km path at 40m altitude over urban streets. In the fifteen flights which utilized pilot handoff, a pilot at one end of a 1.5 km path initiated the flight at 120m altitude over buildings and trees, and at the midway point of the path transferred radio control to a pilot at the other end. In comparison, the chase vehicle method requires less ground crew and simpler avionics, while the pilot handoff method avoids schedule risk arising from street traffic congestion but better replicates actual direct routing for BVLOS flights. Collision risk with another aircraft was introduced in both campaigns and mitigated with the same manual and autonomous methods. Results from these campaigns serve as a basis for planned BVLOS operations at NASA LaRC.

Nicholas Rymer↗
NASA NTRSDate not supplied

SIRIUS: Simulation Infrastructure for Research on Interoperating Unmanned Systems

This paper presents the Simulation Infrastructure for Research on Interoperating Unmanned Systems (SIRIUS), a research framework for simulation and analysis of future conceptual Urban Air Mobility (UAM) operations. SIRIUS is being developed under the auspices of the NASA Air Traffic Management eXploration project, UAM subproject (ATM-X UAM). SIRIUS provides an intuitive, highly configurable graphical user interface to design complex traffic scenarios and airspace configurations representative of conceptual UAM operations. Aircraft simulated with SIRIUS can be equipped with flight-tested capabilities for detect and avoid (DAA), geofencing, distributed merging and spacing, path conformance, and path planning while executing time-constrained, 4D trajectories generated by a UAM ground operations system. Central to the design of the SIRIUS simulation framework is the capability to evaluate the integration and interoperability of ground-based separation services (e.g., strategic separation) with extended DAA functionality (e.g., path monitoring, separation provision, merging and spacing, etc.) The simulation environment also supports modelling of wind, navigation, and sensor uncertainties, as well as communication delays. SIRIUS enables distributed simulation of large-scale scenarios. An interactive graphical analysis capability helps isolate, visualize, and compare relevant vehicle state data and widely used measures of performance metrics across multiple scenarios.

Andrew Peters↗
NASA NTRSDate not supplied

DANTi, DAA in the Cockpit

DANTi is a prototype Electronic Flight Bag which incorporates an assistive Detect and Avoid (DAA) capability developed by NASA.

Maria Consiglio↗
NASA NTRSDate not supplied

Assistive Detect and Avoid for Pilots in the Cockpit

Aircraft not receiving radar services rely on see and avoid and radio coordination via Common Traffic Advisory Frequencies to remain well clear of each other and avoid mid-air collisions. Radio coordination is usually performed in the vicinity of non-towered airports whereas non-radar services en-route operations rely solely on see and avoid. This paper presents the results of a simulation study of the effectiveness of assistive detect and avoid technologies when used to enhance pilots’ ability to see and avoid nearby traffic. Three different experimental conditions are modeled, representing “unaided see and avoid”, “see and avoid with traffic advisories”, and “see and avoid with assistive detect and avoid technology”. The effectiveness of see and avoid is evaluated using a set of head-on, crossing, and overtaking encounter scenarios and a model of visual acquisition embedded in a Monte Carlo simulation. The effectiveness of assistive detect and avoid is estimated for the same encounter scenarios. A prototype system for detect and avoid and a summary of results are presented. Preliminary results strongly suggest that assistive detect and avoid could greatly enhance the capabilities of flight crews to avoid traffic and remain well clear.

collision↗
NASA NTRSDate not supplied

DANTi: A Tool for Assistive Detect and Avoid Research

This paper presents DANTi, a research tool developed at NASA Langley Research Center to support the validation of Assistive Detect and Avoid (ADAA) requirements for General Aviation (GA). ADAA is a future on-board aircraft technology intended to augment a pilot’s see-and-avoid capability by helping them identify and resolve traffic conflicts earlier and more efficiently. DANTi includes a realistic Electronic Flight Bag (EFB) display and a fast-time simulation environment that can be fully customized to meet different research requirements. DANTi is currently used within NASA efforts such as the Air Mobility Pathfinders project on future air transportation systems and a joint NASA/FAA Laboratory Integrated Test Environment (NFLITE) on next-generation airspace operations in urban environments. These efforts investigate ADAA requirements in advanced urban air mobility settings where new aircraft types, new services, and new traffic patterns will be integrated in an overall crowded airspace.

Detect and Avoid↗
NASA NTRSDate not supplied

Assistive Detect and Avoid Technology in Urban Air Mobility Environments

The use of Assistive Detect and Avoid (Assistive DAA or ADAA) technology in Urban Air Mobility (UAM) environments poses potential benefits as well as challenges. Assistive DAA refers to the leveraged use of DAA technology, originally developed to replace see-and-avoid capabilities for remotely piloted aircraft, in onboard-piloted aircraft to augment (rather than replace) pilots’ see-and-avoid abilities and thus enhance the safety and efficiency of visual flight operations. ADAA is anticipated to be especially safety-enhancing in airspace where traffic density is high or traditional air traffic services are limited, such as in future UAM environments. ADAA may also enable higher-tempo UAM operations than with only see-and-avoid capabilities, while still maintaining acceptable levels of safety. UAM concepts under development by the FAA, NASA, and industry focus on operations moving people and cargo in urban and suburban areas using innovative technologies, operations, and aircraft, including electric vertical takeoff and landing (eVTOL) aircraft. Researchers at NASA Langley Research Center, in collaboration with FAA researchers at the William J. Hughes Technical Center in Atlantic City, NJ, have conducted a series of medium-fidelity, human-in-the-loop research simulations of potential future UAM operations and concepts in both Class C and Class B airspace environments. These simulations have included use of a Langley-developed ADAA research tool called DANTi, which enables configurable ADAA displays to be presented to pilots of simulated eVTOL aircraft participating in higher-density and higher-tempo UAM operations. Experience and observations made during testing of the NASA-developed DANTi ADAA capability in the UAM NFLITE simulation environment will be reported in this paper together with a discussion of airspace integration and regulatory topics.

Detect and Avoid↗
NASA NTRSDate not supplied

Assistive Detect and Avoid Technology in Urban Air Mobility Environments

The use of Assistive Detect and Avoid (Assistive DAA or ADAA) technology in Urban Air Mobility (UAM) environments poses potential benefits as well as challenges. Assistive DAA refers to the leveraged use of DAA technology, originally developed to replace see-and-avoid capabilities for remotely piloted aircraft, in onboard-piloted aircraft to augment (rather than replace) pilots’ see-and-avoid abilities and thus enhance the safety and efficiency of visual flight operations. ADAA is anticipated to be especially safety-enhancing in airspace where traffic density is high or traditional air traffic services are limited, such as in future UAM environments. ADAA may also enable higher-tempo UAM operations than with only see-and-avoid capabilities, while still maintaining acceptable levels of safety. UAM concepts under development by the FAA, NASA, and industry focus on operations moving people and cargo in urban and suburban areas using innovative technologies, operations, and aircraft, including electric vertical takeoff and landing (eVTOL) aircraft. Researchers at NASA Langley Research Center, in collaboration with FAA researchers at the William J. Hughes Technical Center in Atlantic City, NJ, have conducted a series of medium-fidelity, human-in-the-loop research simulations of potential future UAM operations and concepts in both Class C and Class B airspace environments. These simulations have included use of a Langley-developed ADAA research tool called DANTi, which enables configurable ADAA displays to be presented to pilots of simulated eVTOL aircraft participating in higher-density and higher-tempo UAM operations. Experience and observations made during testing of the NASA-developed DANTi ADAA capability in the UAM NFLITE simulation environment will be reported in this paper together with a discussion of airspace integration and regulatory topics.

Detect and Avoid↗