Air-Cooled Temperature Swing Compression System Rebuild
Note: Presentation includes animation and should be viewed in presentation mode for best results.
Marian Alcid↗
Engineering topics
Marian Alcid
Publications and source records attributed to Marian Alcid.
Design for an Integrated Open-Loop System for Carbon Dioxide Removal using Liquid Amine
Manned Space missions require maintaining a safe environment for the crew that can both sustain a breathable atmosphere and remove pollutants. Carbon dioxide, while not toxic in low concentrations, accumulates as crew members work and breath and can eventually affect the crew’s health. Therefore, a constant, passive system to remove the carbon dioxide build up is necessary for long-term missions. Currently, the prevailing liquid sorbent used in submarines and industrial flue gas utilizes the primary amine, monoethanolamine (MEA), to capture, transfer, and remove carbon dioxide from air. Diglycolamine (DGA) is an alternate primary amine that has similar performance and less volatility. It is currently being studied at Ames Research Center (ARC) and is the primary candidate for the operation of the sub-scale liquid amine test stand. The test stand is used to investigate liquid flow and liquid gas interfaces to assist in a system design for microgravity applications. The test stand includes a wedge design utilizes capillary action to hold the liquid while allowing gas-liquid interaction for carbon dioxide transfer. These wedge trays are placed in a contactor unit to remove carbon dioxide from the air stream, a degasser unit to replenish the liquid amine, and a capillary condensing heat exchanger (CCHX) to recapture water lost in the degasser unit. Nominal operating conditions for the contactor are a gas flow rate of 26scfm enriched with pure CO2 to 2600ppm and a liquid mixture of 65/35 vol% DGA/H2O at 0.65mL/min while the degasser was operated at 100°C and 1 atm. This paper discusses the challenges and limitations of a fully integrated system which will influence the design of a new subscale test stand.
Adrian Cortez↗
Comparison of Alternative Configurations of an Integrated Open-Loop Carbon Dioxide Removal System using Liquid Amine
Several carbon dioxide removal systems are being investigated for applications in microgravity. The liquid amine wedge system utilizes the capillary action of liquids to prevent the mixing of the air and liquid while still allowing for carbon dioxide capture at their interface. A one crew mission requires approximately 1 kg per day of carbon dioxide removal to prevent adverse health effects. A proposed design of a wedge tray system can be improved from the initial testing parameters to achieve the required carbon dioxide capture for one crew. The wedge trays in the contactor can be organized in either a parallel configuration to accumulate less CO2 in the liquid but at a higher flow rate or a series configuration to yield a higher weight percentage of CO2 in the liquid but at a lower flow rate. The gas flow rate and composition were held constant at 26scfm and 2600ppm, respectively, due to constraints of other proposed systems but the liquid flow rate was adjusted between 0.1mL/min and 10mL/min. The flow rate that yielded the best carbon dioxide capture was X mL/min and Y mL/min for the parallel and series configurations, respectively. The degasser temperature and pressure were varied from 80 to 100°C and 0 and -3 inHg. The largest carbon dioxide flux of Z kg/day/m2 was observed at a contactor liquid flow rate of X mL/min and a degasser temperature and pressure of T°C and P inHg.
Adrian Cortez↗
Literature Review of Microwave Regeneration of CO2 Capture Sorbent Materials
Utilizing liquid amines for air revitalization applications has been of continued interest for many decades. They have the advantage of being regenerable sorbents with long lifetimes and a high acuteness for carbon dioxide. While their usage on Earth for flue gas and submarines has been explored for some time now, they are still being researched for use in microgravity environments. To succeed in a microgravity environment, such as usage on the International Space Station, an air revitalization system that is reliant on liquid amines as its sorbent must have a low Equivalent System Mass (ESM), among many other performance parameters. One way of optimizing this ESM number is through bringing down the systems power consumption with the use of microwave heating of the liquid sorbent. Microwave heating allows the liquid sorbent to be heated in a much more efficient way when compared to conventional types of heating techniques, such as convection or conduction. This paper will explore the physical mechanisms behind microwave heating, and how it could potentially be applied to a liquid amine carbon capture system, laying out any concerns and future constraints that a system designer may encounter.
Tiago Faria Costa↗
Diglycolamine Material Compatibility through Mechanical Testing
One promising candidate for use as a liquid sorbent in air revitalization technologies is a mixture of diglycolamine and water. This solution can react heavily with certain materials, putting a constraint on what materials can be used when designing and operating a liquid amine air revitalization system. Initial testing on materials has been done in the Air Revitalization labs at NASA Ames Research Center (ARC) through dunk testing of materials and physically checking for swelling, cracking, or any sort of corrosion of the material at hand. While this approach allowed for a quick way of material testing, a more thorough approach is favorable to allow for a database of compatible materials and their properties after contact with the solution for extended periods of time to be compiled. With this database, an air revitalization system intended for long-duration space flight can be designed and operated with confidence that the materials chosen will not degrade and need to be replaced over time.
Tiago Faria Costa↗
Comparison of Equivalent System Mass (ESM) and Modeling Results from Improved Heat Loss Approaches for the Carbon Dioxide Deposition (CDep) System
Proper insulation on any type of cryogenic system is essential for its performance to be optimal, as a poorly insulated system will allow for significant heat loss. Different insulation arrangements for CDep were considered, and performance was simulated and measured in Modelica. Heat loss was correlated to cycle time and CO2 deposition efficiency, which led to overall system power usage. Mass, volume, and power consumption were weighted accordingly in the ESM calculations to guide selection of the CDep insulation scheme.
Marian Alcid↗
Design Concepts for an Optimized, Modular, and Scalable Liquid Amine Test Stand
The Air Revitalization Labs at NASA Ames Research Center (ARC) is investigating liquid amines to for their performance removing spacecraft carbon dioxide (CO2) for crewed space missions. Development of the current one-crew scale amine test stand stems from several modifications to a test stand initially built at NASA Johnson Space Center (JSC) This sub-scale system has been modified to incorporate a flow spreader for the inlet air stream, an updated contactor design for CO2 capture, a degasser to regenerate the liquid sorbent and recover the captured CO2, and a condenser to reduce water loss. Results from the existing integrated liquid amine test stand have provided valuable insight, but continued performance optimization requires design and build of a new integrated test system. New design concepts will institute a modular configuration to allow for interfacing with novel contactor and degasser architecture, parallel or series flow pathways for the air stream and liquid sorbent, and scaling up to a 4-crew CO2 removal system.
Tiago Faria Costa↗